Microstructural Modification and property improvement of boride/Ti-6Al-4V surface-alloyed materials fabricated by high-energy electron-beam irradiation
Source abstract
Abstract
The present study is concerned with the fabrication and microstructural analysis of boride/Ti-6Al-4V surface-alloyed materials using the irradiation of a high-energy electron beam. Mixtures of TiB2 or MoB powders and CaF2 flux were placed on a Ti-6Al-4V alloy substrate and subsequently irradiated using a high-energy electron beam. Specimens processed with a flux mixing ratio of 40 wt pct showed that the melted region of 1.1 to 1.5 mm in thickness was homogeneously formed without defects and contained a large amount of titanium borides (TiB). The formation of TiB in the melted region greatly improved the Vickers hardness, high-temperature Vickers hardness, and wear resistance to levels 2 or 3 three times higher than the those for the Ti alloy substrate. Also, the addition of MoB powders into the mixtures made possible the fabrication of surface-alloyed materials with various properties by controlling the kind, size, and volume fraction of TiB and the characteristics of the matrix. These findings suggested that surface alloying using high-energy electron-beam irradiation was economical and useful for the development of boride/Ti-6Al-4V surface-alloyed materials with improved properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. J. Magnan, G.C. Weatherly, and M.-C. Cheynet: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 19–29.10.1007/s11661-999-0192-8 ↗
2. A. Bloyce: J. Eng. Tribol., 1998, vol. 212, pp. 467–76.
3. T. Nakayama, Y. Wada, and H. Ido: R&D, 1993, vol. 43, pp. 71–74.
4. T. Sonoda and M. Kato: Mater. Res. Bull., 1997, vol. 32, pp. 899–905.10.1016/S0025-5408(97)00035-4 ↗
5. Z. Yang, M. An, J. Zhang, Z. Tu, and M. Li: Plat. Surf. Finish., 1997, vol. 84, pp. 68–71.
6. C. Hu, H. Xin, L.M. Waton, and T.N. Baker: Acta Mater., 1997, vol. 45, pp. 4311–22.10.1016/S1359-6454(97)00076-1 ↗
7. L. Fouilland-Paille, S. Ettaqi, S. Benayoun, and J.J. Hantzpergue: Surf. Coating Technol., 1997, vol. 88, pp. 204–11.10.1016/S0257-8972(96)02925-8 ↗
8. J.S. Selvan, K. Subramanian, and A.K. Nath: Adv. Perf. Mater., 1999, vol. 6, pp. 71–83.10.1023/A:1008778013183 ↗
9. J.H. Abboud and D.R.F. West: J. Mater. Sci. Lett., 1994, vol. 13, pp. 457–61.10.1007/BF00278027 ↗
10. T. Bell, P.H. Morton, and A. Bloyce: Mater. Sci. Eng., 1994, vol. A184, pp. 73–86.10.1016/0921-5093(94)91022-7 ↗
11. J.M. Poate, G. Foti, and D.C. Jacobson: Surface Modification and Alloying by Laser, Ion, and Electron Beams, NATO Conf. Proc. Ser. VI, Plenum Press, New York, NY, 1983, vol. 8, p. 40.10.1007/978-1-4613-3733-1 ↗
12. K. Euth, S. Lee, and K. Shin: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3143–51.
13. S. Oh, D. Suh, S. Lee, and N.J. Kim: Mater. Sci. Eng., 1998, vol. A248, pp. 245–55.10.1016/S0921-5093(97)00742-9 ↗
14. A.F. Vaisman, S.B. Vasserman, M.G. Golkovskii, V.D. Kedo, and R.A. Salimov: About Surface Hardening by Concentrated Electron Beam at Atmosphere, Preprint No. 88-73, Budker Institute of Nuclear Physics, Novosibrsk, Russia, 1998, pp. 5–31.
15. K. Euh, S.-H. Choo, and S. Lee: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2849–55.10.1007/BF02830354 ↗
16. L. Davis: An Introduction to Welding Fluxes for Mild and Low Alloy Steels, The Welding Institute, Cambridge, United Kingdom, 1981, pp. 1–16.
17. M.A. Greenfield and H. Margolin: Metall. Trans., 1972, vol. 3, pp. 2649–59.10.1007/BF02644241 ↗
18. D. Eylon, J.A. Hall, C.M. Pierce, and D.L. Ruck: Metall. Trans. A, 1976, vol. 7A, pp. 1817–26.10.1007/BF02654976 ↗
19. A. Gysler and G. Lütjering: Metall. Trans. A, 1982, vol. 13A, pp. 1435–43.10.1007/BF02642882 ↗
20. M. Bauccio: ASM Engineered Materials Reference Book, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 301–11.
21. R.C. Weast: Handbook of Chemistry and Physics, 70th ed., CRC Press, Boca Raton, FL, 1989, p. B-80.
22. G. Petzow: Metallographic Etching, ASM, Metals Park, OH, 1978, pp. 85–88.
23. DIN 50320: Wear, Definitions and Terminology, Beuth-Verlag, Berlin, 1980.
24. M.E. Hyman, C. McCullough, J.J. Valencia, C.G. Levi, and R. Mehrabian: Metall. Trans. A, 1989, vol. 20A, pp. 1847–59.10.1007/BF02663215 ↗
25. Z. Fan and A.P. Midownik: J. Mater. Sci., 1994, vol. 29, pp. 1127–34.10.1007/BF00351442 ↗
26. S.M. Gurevich: The Metallurgy and Technology of Welding the Titanium and Titanium Alloys, Naukova Dumka, Kiev, 1986, pp. 108–19.
27. S.M. Gurevich: Handbook on Welding of the Nonferrous Metals, Naukova Dumka, Kiev, 1990, pp. 190–91.
28. S.-H. Choo, S. Lee, and S.-J. Kwon: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3131–41.10.1007/s11661-999-0224-4 ↗
29. J.C. Oh, D. Choo, and S. Lee: Surf. Coat. Technol., 2000, vol. 127, pp. 76–85.10.1016/S0257-8972(99)00664-7 ↗
30. K. Euh, J. Lee, S. Lee, Y. Koo, and N.J. Kim: Scripta Mater., 2000, in press.
31. T.B. Massalski: Binary Phase Diagrams, vol. 1, ASM INTERNATIONAL, Metals Park, OH, 1986, p. 392.
32. R. Boyer, G. Welsch, and E.W. Collings: Materials Properties Handbook: Titanium Alloys, ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 5–11.
33. Metals Handbook: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, 10th ed., ASM INTERNATIONAL, Metals Park, OH, 1990, vol. 2, pp. 592–633.