Two-Zone Microstructures in Al-18Si Alloy Powders
Source abstract
Abstract
Hypereutectic Al-18 wt pct Si alloy is widely used in automotive industry as a wear-resistant alloy for engine components. However, in the last few years, this traditional composition is being considered for processing by different rapid solidification methods. Positive points include its low thermal expansion and uniform distribution of surface oxides. Nevertheless, the microstructural aspects of Al-Si powders of 18 wt pct Si are still need to be addressed, such as, the eutectic Si morphology, size, and distribution generated by different process conditions during rapid solidification. Based on a detailed quantitative analysis of the microstructures of rapid solidified Al-18 wt pct Si in this work, solidification conditions that yield specific Si morphologies, Si spacing, and thermal cooling conditions are outlined. The focus is determining the solidification conditions that will yield a specified shape of eutectic Si. It is shown that Si morphology is dependent on a combination of growth velocity (based on modified JH model) and temperature gradient. Furthermore, the highest hardness is achieved with globular morphologies of Si. The processing conditions required to achieve these properties are outlined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. J.W. Bray: ASM Metals Handbook, 1976, vol. 2, 10th ed., ASM Intl.
2. V.S. Zolotorevsky, N.A. Belov and M.V. Glazoff: Casting Aluminum Alloys, 2007, vol. 12, Elsevier, Oxford.
3. R.V. Reyes, T.S. Bello, R. Kakitani, T.A. Costa, A. Garcia, N. Cheung, J.E. Spinelli: Mater. Sci. Eng. A., 2017, vol. 685, pp. 235-243.10.1016/j.msea.2016.12.096 ↗
4. M. Tebib, F. Ajersch, A.M. Samuel, X.-G. Chen: Metall. Mater. Trans. A., 2013, vol. 44, pp. 4282-4295.10.1007/s11661-013-1769-9 ↗
5. L. Lasa, JM. Rodriguez-Ibabe: Mater. Sci. Eng. A., 2003, vol. 363, pp. 193-202.10.1016/S0921-5093(03)00633-6 ↗
6. K. Matsuura, M. Kudoh, H. Kinoshita, H. Takahashi: Mater. Chem. Phys., 2003, vol. 81, pp. 393-395.10.1016/S0254-0584(03)00030-0 ↗
7. Z. Kamberovic, E. Romhanji, M. Filipovic, M. Korac: Metallurgy, J. Metall., 2009, vol. 15, pp. 189-200.
8. W.S. Miller, L. Zhuang, J. Bottema, A. Wittebrood, P. De Smet, A. Vieregge: Mater. Sci. Eng. A, 2000, vol 280, pp. 37-49.10.1016/S0921-5093(99)00653-X ↗
9. N. Kang, P. Coddet, H. Liao, T. Baur, C. Coddet: Appl. Surf. Sci., 2016, vol. 378, pp. 142-149.10.1016/j.apsusc.2016.03.221 ↗
10. E.O. Olakanmi: J. Mater. Process. Tech., 2013, vol. 213, pp. 1387-1405.10.1016/j.jmatprotec.2013.03.009 ↗
11. N. Kang, P. Coddet, H. Liao, C. Coddet: J. Alloy Compd., 2016, vol. 662, pp. 259-262.10.1016/j.jallcom.2015.11.222 ↗
12. Y.E. Kalay, L.S. Chumbley, I.E. Anderson, R.E. Napolitano: Metall Mater Trans A, 2007, vol. 38, pp. 1452-1457.10.1007/s11661-007-9168-8 ↗
13. W.J. Boettinger, L. Bendersky, J. G. Early: Metall Mater Trans A, 1986, vol. 17, pp. 781-790.10.1007/BF02643853 ↗
14. T. Hosch, L. G. England and R. E. Napolitano, J Mater Sci, 2009, v. 44, pp. 4892–4899.10.1007/s10853-009-3747-6 ↗
15. A. Biswas, B.L. Mordike, I. Manna and J.D. Majumdar: Lasers Eng., 2008, vol. 18, pp. 95-105.
16. V.C. Srivastava, R.K. Mandal, S.N. Ojha: Mater. Sci. Eng. A, 2001, vol. 304-306, pp. 555-558.10.1016/S0921-5093(00)01514-8 ↗
17. M. Pierantoni, M. Gremaud, P. Magnin, D. Stoll, W. Kurz: Acta Metall. Mater., 1992, vol. 40, pp. 1637-1644.10.1016/0956-7151(92)90106-O ↗
18. S.P. Nikanorov, M.P. Volkov, V.N. Gurin, Yu.A. Burenkov, L.I. Derkachenko, B.K. Kardashev, L.L. Regel, W.R. Wilcox: Mater. Sci. Eng. A, 2005, vol. 390, pp. 63-69.10.1016/j.msea.2004.07.037 ↗
19. R. Trivedi, F. Jin, I.E. Anderson: Acta Mater., 2003, vol. 51, pp. 289-300.10.1016/S1359-6454(02)00226-4 ↗
20. A. M. Mullis, L. Farrell, R. F. Cochrane, and N. J. Adkins: Metall. Mater. Trans. B, 2013, vol. 44, pp. 992-999.10.1007/s11663-013-9856-2 ↗
21. J. D. Roehling, D. R. Coughlin, J. W. Gibbs, J. K. Baldwin, J. C.E. Mertens, G. H. Campbell, A. J. Clarke, J. T. McKeown: Acta Mater., 2017, vol. 131, pp. 22-30.10.1016/j.actamat.2017.03.061 ↗
22. H. Henein, V. Buchoud, R. Schmidt, C. Watt, D. Malakov, C-A. Gandin, G. Lesoult, V. Uhlenwinkel: Can. Metall. Quart., 2010, vol. 49, pp. 275-292.10.1179/cmq.2010.49.3.275 ↗
23. J.B. Wiskel, K. Navel, H. Henein, E. Maire: Can. Metall. Quart., 2002, vol. 41, pp. 193-204.10.1179/cmq.2002.41.2.193 ↗
24. J.B. Wiskel, H. Henein, E. Maire: Can. Metall. Quart., 2002, vol. 41, pp. 97-110.10.1179/cmq.2002.41.1.97 ↗
25. A.-A. Bogno, P. Delshad Khatibi, H. Henein, Ch.-A. Gandin: Metall. Mater. Trans. A, 2016, vol. 47, pp. 4606-4615.10.1007/s11661-016-3594-4 ↗
26. M Gunduz, E Çadirli: Mater Sci Eng A, 2002, vol. 327, pp. 167-185.10.1016/S0921-5093(01)01649-5 ↗
27. M. Gündüz, H. Kaya, E. Çadırlı, A. Özmen: Mater Sci Eng A, 2004, vol. 369, pp. 215-229.10.1016/j.msea.2003.11.020 ↗
28. K.A. Jackson, J.D. Hunt: Lamellar and rod eutectic growth, T Metall Soc AIME, 1966, vol. 236, pp. 1129-1142.
29. P. Magnin, J.T. Mason, R. Trivedi: Acta Metall. Mater., 1991, vol. 39, pp. 469-480.10.1016/0956-7151(91)90115-H ↗
30. T. Magnusson, L. Arnberg: Metall. Mater. Trans. A, 2001, vol. 32, pp. 2605-2613.10.1007/s11661-001-0050-9 ↗
31. R. Brandt, G. Neuer: Int. J. Thermophys, 2007, vol. 28, pp. 1429-1446.10.1007/s10765-006-0144-0 ↗
32. B.M. Angadi, R. Hiremath, A. Chennakesava Reddy and S. A. Kori: J Mec. Eng. Res. Technol., 2014, vol. 2, pp. 536–44.
33. Z. Zhang, X. Bian, Y. Wang, X. Liu: T Nonferr Metal Soc, 2001, vol. 11, pp. 374-377.
34. J.W. Martin, R.D. Doherty and B. Cantor: Stability of Microstructure in Metallic Systems, Cambridge University Press, Cambridge, 1997.10.1017/CBO9780511623134 ↗
35. A. Garcia, T.W. Clyne, M. Prates: Metall. Trans. B, 1979, vol. 10, pp. 85-92.10.1007/BF02653977 ↗
36. M. E. Glicksman: Principles of Solidification, Chapter 3: Thermal Concepts in Solidification, 2011, Springer, New York, pp. 53–68.10.1007/978-1-4419-7344-3 ↗
37. R.V. Reyes, R. Kakitani, T.A. Costa, J.E. Spinelli and N. Cheung: A.: Philos. Mag. Lett., 2016, vol. 96, pp. 228–37.10.1080/09500839.2016.1192297 ↗
38. H. Kaya, E. Çadirli, M. Gündüz and A. Ulgen: J. Mater. Eng. Perform., 2003, vol. 12, pp. 544-551.10.1361/105994903100277201 ↗
39. B. Toloui, A. Hellawell: Acta Metall., 1976, vol. 24, pp. 565-573.10.1016/0001-6160(76)90102-4 ↗
40. S. Khan, A. Ourdjini, Q. S. Hamed, M. A. Alam Najafabadi, R. Elliott: J. Mater. Sci., 1993, vol. 28, pp. 5957-5962.10.1007/BF00365208 ↗
41. R.A. Islam, Y.C. Chan, W. Jillek, S. Islam: Microelectron. J., 2006, vol. 37, pp. 705-713.10.1016/j.mejo.2005.12.010 ↗