journal article·2017-04

Friction Stir Welding in Wrought and Cast Aluminum Alloys: Weld Quality Evaluation and Effects of Processing Parameters on Microstructure and Mechanical Properties

Yi Pan, Diana A. Lados

Publisher page

Abstract

Friction stir welding (FSW) is a solid-state process widely used for joining similar and dissimilar materials for critical applications in the transportation sector. Understanding the effects of the process on microstructure and mechanical properties is critical in design for structural integrity. In this study, four aluminum alloy systems (wrought 6061-T651 and cast A356, 319, and A390) were processed in both as-fabricated and pre-weld heat-treated (T6) conditions using various processing parameters. The effects of processing and heat treatment on the resulting microstructures, macro-/micro-hardness, and tensile properties were systematically investigated and mechanistically correlated to changes in grain size, characteristic phases, and strengthening precipitates. Tensile tests were performed at room temperature both along and across the welding zones. A new method able to evaluate weld quality (using a weld quality index) was developed based on the stress concentration calculated under tensile loading. Optimum processing parameter domains that provide both defect-free welds and good mechanical properties were determined for each alloy and associated with the thermal history of the process. These results were further related to characteristic microstructural features, which can be used for component design and materials/process optimization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, C.J. Dawes, GB Patent Application No. 9125978.8, 1991.
2. [2] C.J. Dawes and W.M. Thomas: TWI Bulletin 6, 1995, pp. 124-127.
3. [3] R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, 50: pp. 1-78.10.1016/j.mser.2005.07.001 ↗
4. W.J. Arbegast, E.R. Coletta, Z. Li, “Characterization of Friction Stir Weld Defect Types”, TMS Annual Meeting and Exhibition, New Orleans, LA, Feb 11–15, 2001.
5. P. Podržaj, B. Jerman and D. Klobčar: Metalurgija. 2015, 54(2): 387-389.
6. [6] Y.G. Kim, H. Fujii, T. Tsumura, T. Komazaki and K. Nakata: Mater. Sci. Eng. A, 2006, 415: pp. 250–254.10.1016/j.msea.2005.09.072 ↗
7. [7] H. Doude, J. Schneider, B. Patton, S. Stafford, T. Waters and C. Varner: J. Mater. Process. Technol. 2015, 222: pp. 188-196.10.1016/j.jmatprotec.2015.01.019 ↗
8. [8] S. Tutunchilar, M. Haghpanahi, M.K. Besharati Givi, P. Asadi and P. Bahemmat: Mater. Des., 2012, 40: pp. 415–426.10.1016/j.matdes.2012.04.001 ↗
9. [9] G. D’Urso, M. Longo, C. Giardini and E. Ceretti: K. Eng. Mater., 2012, vols. 504-506: pp. 759-764.
10. [10] J. Sua, T. W. Nelson and C.J. Sterling: Mater. Sci. Eng. A, 2005, 405: pp. 277–286.10.1016/j.msea.2005.06.009 ↗
11. X. Liang, H. Li, Z. Li, T. Hong, B. Mac, S. Liu and Y. Liu: Mater. Des., 2012, 35: pp. 603–608.10.1016/j.matdes.2011.10.009 ↗
12. U.F.H.R. Suhuddin, S. Mironov, Y.S. Sato and H. Kokawa: Mater. Sci. Eng. A, 2010, 527: pp. 1962– 196910.1016/j.msea.2009.11.029 ↗
13. [13] K.S. Arora, S. Pandey, M. Schaper and R. Kumar: J. Mater. Sci. Technol., 2010, 26(8): pp. 747-753.10.1016/S1005-0302(10)60118-1 ↗
14. [14] G. Singh, K. Singh and J. Singh: Trans. Indian Inst. Met., 2011, 64(4–5): pp. 325–330.10.1007/s12666-011-0101-x ↗
15. [15] S. Benavides, Y. Li, L.E. Murr, D. Brown and J.C. McClure: Scripta Meter., 1999, 41 (8): pp. 809-815.10.1016/S1359-6462(99)00226-2 ↗
16. [16] Y. Li, L.E. Murr and J.C. McClure: Mater. Sci. Eng. A, 1999, 271(1-2): pp. 213-223.10.1016/S0921-5093(99)00204-X ↗
17. B. Heinz and B. Skrotzki: Met. Trans. B, 2002, 33(3): pp. 489-498.10.1007/s11663-002-0059-5 ↗
18. [18] S.H. Kazi, L.E. Murr, K.V. Jata, M.W. Mahoney, R.S. Mishra, S.L. Semiatin and D.P. Filed (Eds.), Friction Stir Welding and Processing, TMS, Warrendale, PA, USA, 2001, p. 139.
19. [19] Z.Y. Ma, S.R. Sharma, R.S. Mishra: Mater. Sci. Eng. A, 2006, 433: pp. 269–278.10.1016/j.msea.2006.06.099 ↗
20. [20] Y. Cao and D.A. Lados: Materials Science Forum, 2013, 765: pp. 741-745.10.4028/www.scientific.net/MSF.765.741 ↗
21. [21] A.L Biro, B.F. Chenelle and D.A. Lados: Metall. Mater. Trans. B, 2012, 43A: pp. 1622-1637.10.1007/s11663-012-9716-5 ↗
22. [22] C.G. Rhodes, M.W. Mahoney, W.H. Bingel, R.A. Spurling and C.C. Bampton, Scripta Mater., 1997, 36: pp. 69-75.10.1016/S1359-6462(96)00344-2 ↗
23. [23] J. Guo, P. Gougeon, X.-G. Chen: Mater. Sci. and Eng. A, 2012, 553: pp. 149–156.10.1016/j.msea.2012.06.004 ↗
24. [24] Y.S. Sato, H. Kokawa, M. Enomoto and S. Jogan: Metall. Mater. Trans. A, 1999, 30A(9): pp. 2429-2437.10.1007/s11661-999-0251-1 ↗
25. C.A.W. Olea, L. Roldo, T.R. Strohaecker, J.F. dos Santos, Welding in the World, vol. 50(11–12), 2006, pp. 78–87.10.1007/BF03263464 ↗
26. [26] X. Sauvage, A. Dédé, A. Cabello Muñoz and B. Huneau: Mater. Sci. Eng. A, 2008, 491: pp. 364-371.10.1016/j.msea.2008.02.006 ↗
27. [27] Y.C. Chen, J.C. Feng and H.J. Liu: Mater. Charact., 2009, 60: pp. 476 –481.10.1016/j.matchar.2008.12.002 ↗
28. [28] I. Shigematsu, Y.-J. Kwon, K. Suzuki, T. Imai, N. Saito: J. Mater. Sci. Lett. 2003, 22: pp. 353 – 356.10.1023/A:1022688908885 ↗
29. [29] T.S. Mahmoud and S.S. Mohamed: Mater. Sci. Eng. A, 2012, 558: pp. 502–509.10.1016/j.msea.2012.08.036 ↗
30. V. Fahimpour, S.K. Sadrnezhaad, F. Karimzadeh: Metall. Mater. Trans. A, 2013, vol. 44a: pp. 2187.10.1007/s11661-012-1588-4 ↗
31. [31] A.G. Rao, B.R.K. Rao, V.P. Deshmukh, A.K. Shah and B.P. Kashyap: Mater. Lett. 2009, 63: pp. 2628– 2630.10.1016/j.matlet.2009.09.022 ↗
32. [32] M. Jayaraman, V. Balasubramanian: Trans. Nonferrous Met. Soc. China, 2013, 23: pp. 605−615.10.1016/S1003-6326(13)62506-6 ↗
33. [33] H.J. Liu, H. Fuji, M. Maeda and K. Nogi: J. Mater. Process. Technol., 2003, 142: pp. 692–696.10.1016/S0924-0136(03)00806-9 ↗
34. [34] A. Simar, Y. Bréchet, B. de Meester, A. Denquin, C. Gallais and T. Pardoen: Prog. Mater Sci. 2012, 57: pp. 95–183.10.1016/j.pmatsci.2011.05.003 ↗
35. A.C. Ugural, S.K. Fenster, Advanced Strength and Applied Elasticity, 4th edn, Chapter 1–3. (Prentice Hall PTR, Englewood Cliffs, 2003).
36. Y. Pan, D.A. Lados: Metall. Mater. Trans. A, 2017, vol. 48, pp. 722–34.10.1007/s11661-016-3865-0 ↗
37. [37] C. Zener: J. of Appl. Phys., 1949, 20: pp. 950-953.10.1063/1.1698258 ↗
38. [38] Y. Du, Y.A. Chang, B. Huang, W. Gong, Z. Jin, H. Xu, Z. Yuan, Y. Liu, Y. He and F.Y. Xie: Mater. Sci. Eng. A, 2003, 363: pp. 140-151.10.1016/S0921-5093(03)00624-5 ↗
39. [39] K.N. Kulkarni and A.A. Luo: J. Phase Equilib. Diff., 2013, 34: pp. 104.10.1007/s11669-013-0189-2 ↗