journal article·2010-03

Effects of Mg Content on Microstructure and Mechanical Properties of Al-14.5Si-4.5Cu Alloy

Chih-Ting Wu, Sheng-Long Lee, Meng-Hsiung Hsieh, Jing-Chie Lin

Publisher page

Abstract

This study elucidates how Mg content affects the microstructure and mechanical properties of Al-14.5Si-4.5Cu alloy by adding 0.45 and 0.90 wt pct Mg. Primary silicon, eutectic silicon, acicular β-Al5FeSi, Al2Cu, and Al5Cu2Mg8Si6 phases were observed under the as-cast condition in low-Mg alloy. In high-Mg alloy, a large proportion of the acicular β-Al5FeSi phase was converted to Chinese script Al8Mg3FeSi6 phase. Neither the acicular β-Al5FeSi phase nor the Chinese script Al8Mg3FeSi6 phase dissolved in the Al matrix during solution heat treatment. Tensile testing indicates that T6-treated high-Mg alloy containing the Chinese script Al8Mg3FeSi6 phase is better than the T6-treated low-Mg alloy that contains the acicular β-Al5FeSi phase. The morphologies of Chinese script Al8Mg3FeSi6 and acicular β-Al5FeSi phases affect the tensile properties of Mg-containing Al-14.5Si-4.5Cu alloys. Additionally, high-Mg alloy contains a higher concentration of Mg solute atoms in the Al matrix than low-Mg alloy, and so the former contains more λ′ precipitates (Al5Cu2Mg8Si6) after T6-tempering treatment. The large amount of λ′ that precipitates in T6-treated high-Mg alloy may also enhance its tensile strength. The ultimate tensile strength (UTS) and elongation of the high-Mg alloy are superior to those of the low-Mg alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. J.E. Gruzleski and B.M. Closset: The Treatment of Liquid Aluminum-Silicon Alloys, AFS, Des Plaines, IL, 1990, pp. 1–4.
2. Y.J. Li, S. Brusethaug, and A. Olsen: Scripta Mater., 2006, vol. 54, pp. 99–03.10.1016/j.scriptamat.2005.08.044 ↗
3. D.K. Dwivedi: Mater. Des., 2006, vol. 27, pp. 610–16.10.1016/j.matdes.2004.11.029 ↗
4. P.S. Wang, S.L. Lee, and J.C. Lin: J. Mater. Res., 2000, vol. 15, pp. 2027–35.10.1557/JMR.2000.0291 ↗
5. P.S. Wang, S.L. Lee, and J.C. Lin: Mater. Sci. Technol.-London, 2004, vol. 20, pp. 539–46.10.1179/026708304225012107 ↗
6. S.N. Yie, S.L. Lee, Y.H. Lin, and J.C. Lin: Mater. Trans, JIM, 1999, vol. 40, pp. 294–300.10.2320/matertrans1989.40.294 ↗
7. Y.H. Tan, S.L. Lee, and Y.L. Lin: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2937–45.10.1007/BF02669650 ↗
8. Y.H. Tan, S.L. Lee, and H.Y. Lin: Int. J. Fatig., 1996, vol. 18, pp. 137–47.10.1016/0142-1123(95)00034-8 ↗
9. Y.H. Tan, S.L. Lee, and Y.L. Lin: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1195–05.10.1007/BF02670615 ↗
10. J.Y. Hwang, H.W. Doty, and M.J. Kaufman: Mater. Sci. Eng. A, 2008, vol. 488, pp. 496–04.10.1016/j.msea.2007.12.026 ↗
11. F.H. Samuel and P. Quellet: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2871–84.10.1007/s11661-998-0194-y ↗
12. F.H. Samuel and A.M. Samuel: Int. J. Cast Met. Res., 1997, vol. 10, pp. 147–57.10.1080/13640461.1997.11819229 ↗
13. H.G. Kang, M. Kida, and H. Miyahara: AFS Trans., 1999, vol. 107, pp. 507–15.
14. D. Apelian, S. Shivkumar, and G. Sigworth: AFS Trans., 1989, vol. 97, pp. 727–42.
15. Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes, ASTM Standard B917/B917M-2001, ASTM, Warrendale, PA, 2001.
16. ASTM B557M-81, ASTM, Philadelphia, PA, 1991.
17. S.F. Fang, M.P. Wang, and M. Song: Mater. Des., 2009, vol. 30, pp. 2460–67.10.1016/j.matdes.2008.10.008 ↗
18. J.E. Hatch: Aluminum: Properties and Physical Metallurgy, Butterworth and Co., London, 1976, p. 205.
19. J.Y. Hwang, R. Banerjee, H.W. Doty, and M.J. Kaufman: Acta Mater., 2009, vol. 57, pp. 1308–17.10.1016/j.actamat.2008.11.021 ↗