High-Velocity Oxygen Fuel Thermal Spray of Fe-Based Amorphous Alloy: a Numerical and Experimental Study
Source abstract
Abstract
The fabrication of dense coatings with appropriate properties using a high velocity oxygen fuel (HVOF) spray process requires an in-depth understanding of the complete gas flow field and particle behavior during the process. A computational fluid dynamics (CFD) model is implemented to investigate the gas flow behavior that occurs during the HVOF process and a simplified one-dimensional decoupled model of the in-flight thermal behavior of the amorphous Fe-based powder particles was developed and applied for three different spray conditions. The numerical results were used to rationalize the different coating microstructures described in the experimental results. Low porosity and amorphous coatings were produced using two different particle size distributions (16 to 25 μ m and 25 to 53 μ m). The amorphous characteristics of the powder were retained in the coating due to melting and rapid solidification in the case of very fine powder or ligaments (<16 μ m) and to the fact that the crystallization temperature was not reached in the case of the large particles (16 to 53 μ m).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High-Temperature Coating Behaviors · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. V.V. Sobolev, J.M. Guilemany, and J. Nutting: High Velocity Oxy-Fuel Spraying, Maney Publishing, Leeds, UK, 2004, pp. 233–352.
2. E.J. Lavernia and Y. Wu: Spray Atomization and Deposition, John Wiley & Sons, New York, NY, 1997, pp. 7–17.
3. D.W. Parker and G.L. Kutner: Adv. Mater. Process., 1991, vol. 140, pp. 68–74.
4. W.L. Johnson: Mater. Sci. Forum, 1996, vols. 225–227, pp. 35–50.10.4028/www.scientific.net/MSF.225-227.35 ↗
5. R. Busch, Y.J. Kim, and W.L. John: J. Appl. Phys., 1995, vol. 77, p. 4039.10.1063/1.359485 ↗
6. A. Peker and W.L. Johnson: Appl. Phys. Lett., 1993, vol. 63, pp. 2342–44.10.1063/1.110520 ↗
7. A. Inoue: Mater. Trans. JIM, 1995, vol. 36, pp. 866–75.10.2320/matertrans1989.36.866 ↗
8. A. Inoue, T. Zhang, and T. Masumoto: Mater. Trans. JIM, 1989, vol. 30, pp. 965–72.10.2320/matertrans1989.30.965 ↗
9. A. Inoue, T. Zhang, and T. Masumoto: J. Non-Cryst. Solids, 1993, vols. 156–158, pp. 473–80.10.1016/0022-3093(93)90003-G ↗
10. W.H. Wang, Z.X. Bao, C.X. Liu, D.Q. Zhao, and J. Eckert: Phys. Rev. B, 2000, vol. 61, pp. 3166–69.10.1103/PhysRevB.61.3166 ↗
11. W.H. Wang, Q. Wei, S. Friedrich, M.P. Macht, N. Wanderka, and H. Wollenberger: Appl. Phys. Lett., 1997, vol. 71, pp. 1053–55.10.1063/1.119725 ↗
12. D.J. Branagan, W.D. Swank, D.C. Haggard, and J.R. Fincke: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2615–21.10.1007/s11661-001-0051-8 ↗
13. D. Cheng, Q. Xu, G. Trapaga, and E.J. Lavernia: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1609–20.10.1007/s11661-001-0139-1 ↗
14. D. Cheng, Q. Xu, G. Trapaga, and E.J. Lavernia: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 525–35.10.1007/s11663-001-0037-3 ↗
15. S. Gu, C.N. Eastwick, K.A. Simmons, and D.G. McCartney: J. Thermal Spray Technol., 2001, vol. 10, pp. 461–69.10.1361/105996301770349231 ↗
16. W.L. Oberkampf and M. Talpallikar: Proc. 7th Nat. Thermal Spray Conf., Boston, MA, 1994, pp. 381–92.
17. B. Hassan, A.R. Lopez, and W.L. Oberkampf: J. Thermal Spray Technol., 1998, vol. 7, pp. 71–77.10.1007/s11666-006-5006-6 ↗
18. C.H. Chang and R.L. Moore: J. Thermal Spray Technol., 1995, vol. 4, pp. 358–66.10.1007/BF02648636 ↗
19. V.V. Sobolev, J.M. Guilemany, A.J. Martin, J.A. Calero, and P. Vilarrubias: J. Mater. Process. Technol., 1998, vol. 79, pp. 213–16.10.1016/S0924-0136(98)00013-2 ↗
20. M. Li and P.D. Christofides: Chem. Eng. Sci., 2005, vol. 60, pp. 3649–69.10.1016/j.ces.2005.02.043 ↗
21. M. Li, D. Shi, and P.D. Christofides: Powder Technol., 2005, vol. 156, pp. 177–94.10.1016/j.powtec.2005.04.011 ↗
22. F.M. White: Fluid Mechanics, McGraw-Hill, New York, NY, 2002, pp. 135–224.
23. W.E. Ranz and W.R. Marshall: Chem. Eng. Prog., 1952, vol. 48, pp. 141–46.
24. L. Pawlowski: The Science and Engineering of Thermal Spray Coatings, 2nd ed.,Wiley, Chichester, England, 2008, pp. 167–214.10.1002/9780470754085.ch5 ↗
25. W.H. Press, S.A. Teukolsky, W.T. Vetterling, and B.P. Flannery: Numerical Recipes in Fortran, 2nd ed., Cambridge University Press, Cambridge, United Kingdom, 1992, pp. 704–07.
26. L.H. Thomas: Watson Science Computer Laboratory Report, Columbia University, New York, NY, 1949.
27. H.S. Udaykumar, R. Mittal, and W. Shyy: J. Comput. Phys., 1999, vol. 153, pp. 535–74.10.1006/jcph.1999.6294 ↗
28. R.B. Rebak, S. Daniel Day, T. Lian, P.D. Hailey, and J.C. Farmer: Metall. Mater. Trans. A: Phys. Metall. Mater. Sci. 2008, vol. 39 (2), pp. 225–34.10.1007/s11661-007-9460-7 ↗