Role of Internal Stresses on the Incubation Times during Stress Corrosion Cracking
Source abstract
Abstract
We have examined the incubation times in two alloys, 7075-T651 aluminum alloy and 4140 steel, as a function of applied K, using the published data in aqueous environment. The role of overloads was compared with the results from those without overloads, for a given environment. Effect of environment (NaCl vs deionized water) was also examined. The results show that in a constant K test, the incubation time increases with decreasing K. When a single overload cycle was applied, the time increased with percent overload for a constant background K, indicating that overload cycle affected the crack tip driving forces. These effects varied with the environment. The changes in the incubation times are analyzed considering one-to-one correspondence between the crack tip driving force and the times. Overloads contributed to compressive residual or internal stresses, thereby affecting the crack tip driving force. The stresses are related to changes in the plastic zone (PZ) sizes formed before and after the overloads. The effective stress intensity due to internal stress, Kint, is defined and is shown to be a function of PZ size. Similarly, condition for crack initiation is expressed as Ktotal = Kapp ± Kint ≥ KIscc. A detailed methodology for the determination of Kint is outlined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. A.H. Hanisch and L.H. Burck: Corros.-NACE, 1982, vol. 38, pp. 330–35.10.5006/1.3621694 ↗
2. B.J. Connolly, K.L. Deffenbaugh, M.G. Koul, and A.L. Moran: J. Met., 2003, vol. 55 (1), pp. 49–52.
3. S.K. Putatunda and V. Venugopal: JTEVA, 1990, vol. 18, pp. 182–90.10.1520/JTE12471J ↗
4. P.S. Pao: Naval Research Laboratory, Washington, DC, 2009, unpublished research.
5. J. Zhang, S. Kalnaus, M. Behrooz, and Y. Jiang: Metall. Mater. Trans. A. DOI:10.1007/s11661-010-0419-8.10.1007/s11661-010-0419-8 ↗
6. S.M.Wiederhorn: J. Am. Ceram. Soc., 1967, vol. 50, pp. 408–14.10.1111/j.1151-2916.1967.tb15145.x ↗
7. I.-H. Lin and R. Thomson: Acta Metall., 1986, vol. 34, pp. 187–206.10.1016/0001-6160(86)90191-4 ↗
8. R. Hermann: J. Mater. Sci., 1981, vol. 16, pp. 2381–86.10.1007/BF01113572 ↗
9. V. Venugopal and S.K. Putatunda: ASTM STP-1090, ASTM, Philadelphia, PA, 1990, pp. 42–58.
10. S.K. Putatunda: J. Mater. Eng., 1991, vol. 13, pp. 77–83.10.1007/BF02834127 ↗
11. Y. Hirose and T. Mura: Mech. Mater., 1984, vol. 3, pp. 95–110.10.1016/0167-6636(84)90001-2 ↗
12. Y. Hirose and T. Mura: Eng. Fract. Mech., 1984, vol. 19, p. 317.10.1016/0013-7944(84)90026-2 ↗
13. W.W. Gerberich, Y.H. Chen, and C. St. John: Metall. Trans., 1975, vol. 6, p. 1485.10.1007/BF02641960 ↗
14. G.L. Hanna, A.R. Troiano, and E.A. Staigerwald: Trans. ASM, 1964, vol. 37, p. 638.
15. J.R. Rice: Stress Corrosion Cracking and Hydrogen Embrittlement in Iron Base Alloys, NACE-5, National Association of Corrosion Engineers, Houston, TX, 1977, p. 11.
16. R.A. Page and W.W. Gerberich: Metall. Trans. A, 1982, vol. 13A, pp. 305–11.10.1007/BF02643321 ↗