Microstructural analysis of vanadium carbide/steel surface-alloyed materials fabricated by high-energy electron-beam irradiation
Source abstract
Abstract
This study is concerned with the microstructural analysis of vanadium carbide (VC)/steel surface-alloyed materials fabricated by high-energy electron-beam irradiation. The mixtures of VC powders and MgO-CaO flux were deposited on a plain carbon steel substrate, and then electron beam was irradiated on these mixtures using an electron-beam accelerator. Microstructures of the irradiated surface regions were examined by optical microscopy, scanning electron microscopy, and transmission electron microscopy. Residual pores were found in the specimen processed without flux, but hardly found in the specimens processed with a considerable addition of flux. As a result of irradiation, vanadium content was homogeneously maintained throughout the melted region, and fine vanadium carbides were formed in the melted region. These microstructural modification including the formation of vanadium carbides greatly improved hardness, especially high-temperature hardness up to 500 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Metal and Thin Film Mechanics · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. K. Euh, S. Lee, and K. Shin: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3143–51.10.1007/s11661-999-0225-3 ↗
2. C. Tassin, F. Laroudie, M. Pons, and L. Lelait: Surf. Coating Technol., 1995, vols. 76–77, pp. 450–53.10.1016/0257-8972(95)02613-4 ↗
3. J.H. Abboud and D.R.F. West: J. Mater. Sci. Lett., 1994, vol. 13, pp. 457–61.10.1007/BF00278027 ↗
4. L. Fouilland-paille, S. Ettaqi, S. Benayoun, and J.J. Hantzpergue: Surf. Coating Technol., 1996, vol. 88, pp. 204–11.10.1016/S0257-8972(96)02925-8 ↗
5. T.N. Baker, H. Xin, C. Hu, and S. Mridha: Mater. Sci. Technol., 1994, vol. 10, pp. 536–44.10.1179/mst.1994.10.6.536 ↗
6. S. Ariely, J. Shen, M. Bamberger, F. Dansiger, and H. Hugel: Surf. Coating Technol., 1991, vol. 45, pp. 403–08.10.1016/0257-8972(91)90249-V ↗
7. A.Y. Fasasi, M. Pons, C. Tassin, and A. Galerie: J. Mater. Sci., 1994, vol. 29, pp. 5121–26.10.1007/BF01151106 ↗
8. L.E. Rehn, S.T. Picraux, and H. Wiedersich: Surface Alloying by Ion, Electron, and Laser Beams, ASM Materials Science Seminar, Toronto, ASM, Metals Park, OH, 1987, pp. 1–17.
9. L.E. Rehn and H. Wiedersich: Surface Alloying by Ion, Electron, and Laser Beams, ASM Materials Science Seminar, Toronto, ASM, Metals Park, OH, 1987, pp. 137–74.
10. F. Laroudie, C. Tassin, and M. Pons: J. Mater. Sci., 1995, vol. 30, pp. 3652–57.10.1007/BF00351880 ↗
11. J.D. Ayers, R.J. Schaefer, and W.P. Robey: J. Met., 1981, vol. 33, pp. 19–23.
12. J.C. Oh, K. Euh, S. Lee, Y. Koo, and N.J. Kim: Scripta Mater., 1998, vol. 39, pp. 1389–94.10.1016/S1359-6462(98)00325-X ↗
13. S.-H. Choo, S. Lee, and S.-J. Kwon: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3131–41.10.1007/s11661-999-0224-4 ↗
14. L. Davis: An Introduction to Welding Fluxes for Mild and Low Carbon Steels, The Welding Institute, Cambridge, United Kingdom, 1981, pp. 1–16.
15. C.E. Jackson: WRC Bull., 1977, vol. 190, pp. 1–25.
16. M.L. Bauccio: ASM Engineered Materials Reference Book, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 283–84.
17. S. Schillerk, U. Heisig, and S. Panzer: Electron Beam Technology, John Wiley & Sons, New York, NY, 1982, pp. 38–41.
18. T. Tabta and R. Ito: Nucl. Sci. Eng., 1974, vol. 55, pp. 226–39.10.13182/NSE74-A23346 ↗
19. K.C. Hwang, S. Lee, and H.C. Lee: Mater. Sci. Eng. A, 1998, vol. A254, pp. 282–95.
20. D. Suh, S. Lee, Y. Koo, and H.C. Lee: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3149–61.10.1007/BF02663865 ↗
21. D. Sub, S. Lee, and Y. Koo: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 637–47.