Influence of Nanotwin Boundary on the Bauschinger’s Effect in Cu: A Molecular Dynamics Simulation Study
Source abstract
Abstract
Plastic pre-strain may decrease the yield strength of metallic materials when stressed in the opposite direction, known as Bauschinger’s effect, which could considerably influence the performance of the materials during cyclic loading processes such as fatigue and fretting. In this study, effects of twin boundary (TW) as an ordered obstacle in a nanoscaled Cu crystal on defects’ generation and annihilation during cyclic tension–compression loading processes were investigated, in comparison with those occurring in a single crystal (SC), using a molecular dynamics simulation technique. It was observed that the Bauschinger’s effect in the nanoscaled TW system was weaker with higher residual strain energy, compared to the SC system; and, the ductility of both the SC and TW systems was increased by the cycling loading, but this increase was smaller for the TW system. Efforts were made to elucidate the mechanisms involved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Fusion materials and technologies · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. J. Bauschinger: Civilingenieur, 1881, vol. 27, pp. 289-348.
2. R. Sowerby, D.K. Uko: Mater Sci Eng A, 1979, vol. 41, pp.43-58.10.1016/0025-5416(79)90043-0 ↗
3. T.S. Srivatsan, Meslet Al-Hajri, J.D. Troxell: Mech. Mater., 2004, vol. 36, pp. 99–116.10.1016/S0167-6636(03)00034-6 ↗
4. N. Chawla, B. Jester, D.T. Vonk: Mater Sci Eng A, 2003, vol. 346, pp.266-272.10.1016/S0921-5093(02)00542-7 ↗
5. C.Y. Tang, D.Y. Li, G.W. Wen: Tribol Lett, 2010, vol. 41, pp. 569-572.10.1007/s11249-010-9735-9 ↗
6. E. Demir, D. Raabe: Acta Mater, 2010, vol. 58, pp. 6055-6063.10.1016/j.actamat.2010.07.023 ↗
7. O.B. Pedersen, L.M. Brown, W.M. Stobbs: Acta Mater, 1981, vol. 29, pp. 1843-50.10.1016/0001-6160(81)90110-3 ↗
8. M. Haouaoui, I. Karaman, H.J. Maier: Acta Mater, 2006, vol. 54, pp. 5477-88.10.1016/j.actamat.2006.07.022 ↗
9. D. Kiener, C. Motz, W. Grosinger, D. Weygand, R. Pippan: Scripta Mater, 2010, vol. 63, pp. 500-503.10.1016/j.scriptamat.2010.05.014 ↗
10. C. Tang, J.M. Wang, G.W. Wen, Y. Wang, D.Y. Li: Wear, 2011, vol. 271, pp. 1237-43.10.1016/j.wear.2010.11.026 ↗
11. L. Yue, H. Zhang, D.Y. Li: Scripta Mater, 2010, vol. 63, pp. 1116-19.10.1016/j.scriptamat.2010.08.019 ↗
12. G.P. Potirniche, M.F. Horstemeyer, B. Jelinek, G.J. Wagner: Int J Fatigue, 2005, vol. 27, pp. 1179-1185.10.1016/j.ijfatigue.2005.06.015 ↗
13. K.J. Zhao, L.L. Fan, C.Q. Chen: Acta Mech Solida Sin, 2009, vol. 22, pp. 650-656.10.1016/S0894-9166(09)60395-5 ↗
14. K.J. Zhao, C.Q. Chen, Y.P. Shen, T.J. Lu: Comp Mater Sci, 2009, vol. 46, pp. 749-754.10.1016/j.commatsci.2009.04.034 ↗
15. M. Buciumeanu, L. Palaghian, A.S. Miranda, F.S. Silva: Int J Fatigue, 2011, vol. 33, pp. 145-152.10.1016/j.ijfatigue.2010.07.012 ↗
16. A. Marchenko, H. Zhang: Metall Mater Trans A, 2012, vol. 43A, pp. 3547-55.10.1007/s11661-012-1208-3 ↗
17. P.J. Guruprasad, W.J. Carter, A.A. Benzerga: Acta Mater, 2008, vol. 56, pp. 5477-91.10.1016/j.actamat.2008.07.019 ↗
18. S. Queyreau, B. Devincre: Philo Mag Lett, 2009, vol. 89, pp. 419-430.10.1080/09500830903005433 ↗
19. D. Zhu, H. Zhang, and D.Y. Li: J. Appl. Phys., 2011, vol. 110 (12491), pp. 1-8.
20. C.J. Shute, B.D. Myers, S. Xie, T.W. Barbee Jr., A.M. Hodge, and J.R. Weertman: Scripta Mater., 2009, vol. 60, pp. 1073–77.10.1016/j.scriptamat.2008.11.049 ↗
21. K. Lu, L. Lu, S. Suresh: Science, 2009, vol. 324, pp. 349-352.10.1126/science.1159610 ↗
22. M. Dao, L. Lu, Y.F. Shen, S. Suresh: Acta Mater, 2006, vol. 54, pp. 5421-5432.10.1016/j.actamat.2006.06.062 ↗
23. I. Karaman, H. Sehitoglu, Y. I. Chumlyakov, I. V. Kireeva, H.J. Maier: Metall Mater Trans A, 2001, vol. 32, pp. 695-706.10.1007/s11661-001-1005-x ↗
24. M. G. Stout, A. D. Rollett: Metall. Trans. A, 1990, vol. 21, pp. 3201-13.10.1007/BF02647315 ↗
25. S.M. Foiles, M.I. Baskes, M.S. Daw: Phys Rev B, 1986, vol. 33, pp. 7983-7991.10.1103/PhysRevB.33.7983 ↗
26. Y. Mishin, M.J. Mehl, D.A. Papaconstantopoulos, A.F. Voter, J.D. Kress: Phys Rev B, 2001, vol. 6322, no. 224106, pp. 1-16.
27. S. Plimpton: J Comput Phys, June 1995, vol. 117, pp. 1-19.10.1006/jcph.1995.1039 ↗
28. S. Nose: Mol Phys, 1984, vol. 52, pp. 255-268.10.1080/00268978400101201 ↗
29. W.G. Hoover: Phys Rev A, 1985, vol. 31, pp. 1695-1697.10.1103/PhysRevA.31.1695 ↗
30. A.S. Clarke, H. Jonsson: Phys Rev E, 1993, vol. 47, pp. 3975-3984.10.1103/PhysRevE.47.3975 ↗
31. A.S. Argon: Strengthening mechanisms in plasticity, 1st ed., p. 13, Oxford University Press, Oxford, 2008.
32. O. Buck, D. Schumacher, A. Seeger: Phys Status Solidi B, 1973, vol. 60, pp. 707-711.10.1002/pssb.2220600226 ↗
33. S.J. Goldberg, R.J. Maciag, and K. Mukherjee: Metall. Trans., 1970, vol. 1, pp. 1079–80.10.1007/BF02811815 ↗
34. P. Ballo, V. Slugen: Comp Mater Sci, 2005, vol. 33, pp. 491-498.10.1016/j.commatsci.2004.09.049 ↗