Reaction Scheme and Liquidus Surface in the Al-Rich Section of the Al-Cr-Ni System
Source abstract
Abstract
The constitution of the ternary system Al-Cr-Ni is investigated over the entire composition range using X-ray diffraction (XRD), energy dispersive X-ray analysis (EDXA), differential thermal analysis (DTA) up to 1500 °C, and metallography. The ternary phase ?1 is confirmed. Its crystal structure, homogeneity range, and melting temperature are corroborated. Two additional ternary phases, labeled ?2 and ?3, are stable at 700 °C. Their compositions are Al77.5Cr12.5Ni10 and Al80Cr15Ni5, respectively. Their XRD powder patterns are shown. The isothermal section at 700 °C and the reaction scheme linking it with the liquidus surface are presented. The Al-rich part of the liquidus surface is characterized by an eutectic trough, which descends monotonously from the pseudobinary maximum e max1: L = NiAl +(Cr) at 1433 ± 1 °C through a series of transition reactions and ends in the ternary eutectic E2: L = Cr7Al45 + NiAl3 + (Al) at 639 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quasicrystal Structures and Properties · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. R. Stickler: High-Temperature Materials for Gas Turbines, Elsevier, Amsterdam, 1974, pp. 115–49
2. D.L. Anton: in Structural Applications of Intermetallic Compounds, J.H. Westbrook and R.L. Fleischer, eds., John Wiley & Sons Ltd., Chichester, United Kingdom, 1995 and 2000, pp. 1–13
3. R.F. Decker: JOM, 2006, vol. 58, pp. 32–3610.1007/s11837-006-0079-8 ↗
4. A. Taylor and R.W. Floyd: J. Inst. Met., 1952–53, vol. 81, pp. 451–64
5. I.I. Kornilov, R.S. Mints: Akad. Nauk CCCR, Izv. Sect. Fiz. Khim. Anal., 1955, vol. 26, pp. 62–67
6. S.M. Merchant, M.R. Notis: Mater. Sci. Eng., 1984, vol. 66, pp. 47–6010.1016/0025-5416(84)90140-X ↗
7. T. Velikanova, K. Korniyenko, and V. Sidorko: in Landolt–Börnstein, New Series, Group IV, vol. 11, Sub vol. A, Part 1, G. Effenberg and S. Ilyenko, eds., Springer, Berlin, 2004, pp. 371–410
8. V. Raghavan: J. Phase Equil. Diff., 2006, vol.27, pp. 381–88
9. E. Rosell-Laclau, M. Durand-Charre, J.C. Joud: J. Mater. Res., 1995, vol. 10, pp. 1154–5810.1557/JMR.1995.1154 ↗
10. E. Rosell-Laclau, M. Durand-Charre, M. Audier: J. Alloys Compd., 1996, vol. 233, pp. 246–6310.1016/0925-8388(95)01988-X ↗
11. A. Sato, A. Yamamoto, X.Z. Li, K. Hiraga, T. Haibach, W. Steurer: Acta Cryst., 1997, vol. C53, pp. 1531–33
12. B. Grushko, W. Kowalski, D. Pavlyuchov, B. Przepiorzynski, M. Surowiec: J. Alloys Compd., 2008, vol. 460, pp. 299–30410.1016/j.jallcom.2007.06.044 ↗
13. K.Y. Wen, Y.L. Chen, K.H. Kuo: Metall. Trans. A, 1992, vol. 23A, pp. 2437–4510.1007/BF02658047 ↗
14. M. Audier, M. Durand-Charre, E. Laclau, H. Klein: J. Alloys Compd., 1995, vol. 220, pp. 225–3010.1016/0925-8388(94)06010-X ↗
15. X.Z. Li, K. Sugiyama, K. Hiraga, A. Sato, A. Yamamoto, X.H. Sui, K.H. Kuo: Z. Kristallogr., 1997, vol. 212, pp. 628–33
16. J.C. Schuster: Intermetallics, 2006, vol. 14, pp. 1304–1110.1016/j.intermet.2005.11.027 ↗
17. Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, ed., ASM INTERNATIONAL, Materials Park, OH, 1990
18. H.L. Chen, F. Weitzer, and J.C. Schuster: poster presented at 12th Int. IUPAC-Conf. on “High Temperature Materials Chemistry HTMC-XII,” Vienna, Austria, 2007
19. W. Köster, E. Wachtel, K. Grube: Z. Metallkd., 1963, vol. 54, pp. 393–401
20. L.G. Akselrud, Y.N. Grin, P.Y. Zavalij, V.K. Pecharsky, and V.S. Fundamensky: Coll. Abstr. 12th Eur. Crystallogr. Meeting, Moskow, 1989
21. Izv. Akad. Nauk SSSR, Moskov, 1989, vol. 3, p. 155
22. W. Wacha: Master’s Thesis, Vienna Institute of Technology, Vienna, Austria, 1989
23. D.N. Compton, L.A. Cornish, M.J. Witcomb: J. Alloys Compd., 2001, vols. 317–318, pp. 372–7810.1016/S0925-8388(00)01441-9 ↗