journal article·2013-08

Physical Simulation of Friction Stir Welding and Processing of Nickel-Base Alloys Using Hot Torsion

James R. Rule, John C. Lippold

Publisher page

Abstract

The Gleeble hot torsion test was utilized in an attempt to simulate the friction stir-processed microstructure of three Ni-base alloys: Hastelloy X, Alloy 625, and Alloy 718. The simulation temperatures were based on actual thermal cycles measured by embedded thermocouples during friction stir processing of these alloys. Peak process temperatures were determined to be approximately 1423 K (1150 °C) for Hastelloy X and Alloy 625 K and 1373 K (352 °C and 1100 °C) for Alloy 718. The peak temperature and cooling rates were programed into the Gleeble™ 3800 thermo-mechanical simulator to reproduce the stir zone and thermo-mechanically affected zone (TMAZ) microstructures. The TMAZ was successfully simulated using this technique, but the stir zone microstructure could not be accurately reproduced, with hot torsion samples exhibiting larger grain size than actual friction stir processing trials. Shear stress and strain rates as a function of temperature were determined for each material using hot torsion simulation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. S. Norton: Ph.D. Thesis, The Ohio State University, Columbus, OH, 2006.
2. S.J. Norton, J.C. Lippold: in S.A. David, T. Debroy, J.C. Lippold, H.B. Smartt, J.M. Vitek (eds.), Trends in Welding Research VII, ASM International, Materials Park, OH, 2006, 287-292.
3. M.F. Sinfield: M.S. Thesis, The Ohio State University, Columbus, OH, 2007.
4. M.F. Sinfield, J.C. Lippold, B.T. Alexandrov, and D. Forrest: 7th Int. Friction Stir Welding Sym., TWI Ltd., Abington, 2008.
5. D.M. Failla: M.S. Thesis, The Ohio State University, Columbus, OH, 2009.
6. D. Failla and J.C. Lippold: 8th Int. Friction Stir Welding Sym., TWI Ltd., Abington, 2010.
7. J.J. Livingston, J.M. Rodelas, and J.C. Lippold: 9th Int. Friction Stir Welding Sym., TWI Ltd., Abington, 2012.
8. M.J. Luton, C.M. Sellars, Acta Metallurgica, 17 (1969) 1033-1043.10.1016/0001-6160(69)90049-2 ↗
9. J.R. Rule and J.C. Lippold: 9th Int. Friction Stir Welding Sym., TWI Ltd., Abington, 2012.
10. L.X. Zhou, T.N. Baker, Mat. Sci. and Eng. A, 177 (1994) 1-9.10.1016/0921-5093(94)90472-3 ↗
11. J.P. Sah, G.J. Richardson, C.M. Sellars, Metal Sci. 8 (1974) 325-331.10.1179/msc.1974.8.1.325 ↗
12. M. Ueki, S. Horie, T. Nakamura, Mat. Sci. and Tech., 3 (1987) 329-337.10.1179/026708387790122585 ↗