journal article·2000-05

Dispersoid-free zones in the heat-affected zone of aluminum alloy welds

B. C. Meyer, G. Tempus, H. Doyen, D. Emanowski, T. Hirsch, P. Mayr

Publisher page

Abstract

The local microstructure in the heat-affected zone 1 (HAZ1) of a laser beam-welded Al-Mg-Si-Cu aluminum alloy is investigated closely. Dispersoid-free zones (DFZs), where the dispersoids of the base material (BM) are dissolved, are found in the vicinity of the fusion line (FL). They are not uniformly surrounding a grain, but oriented toward the FL. Their width can be as large as 10 µm. Detailed analysis has revealed a decreased silicon concentration as well as a decreased hardness of the oriented dispersoid-free zones (ODFZs). Two mechanisms for the formation of this welding metallurgical feature are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. S. Kou: Welding Metallurgy, 1st ed., John Wiley & Sons, New York, NY, 1987, pp. 239–95.
2. I. Beek, A. Weisheit, and B.L. Mordike: Mat.-Wiss. Werkstofftech., 1997, vol. 28, pp. 293–300.10.1002/mawe.19970280612 ↗
3. A.K. Gupta, A.K. Jena, and M.C. Chaturvedi: Mater. Sci. Technol., 1987, vol. 3, pp. 1012–18.10.1179/mst.1987.3.12.1012 ↗
4. L. Sagalowicz, G. Hug, D. Bechet, P. Sainfort, and G. Lapasset: The 4th Int. Conf. on Aluminum Alloys, Atlanta, GA, Sept. 11–16, 1994, The Georgia Institute of Technology, Atlanta, GA, 1994, pp. 636–43.
5. G.A. Edwards, G.L. Dunlop, and M.J. Couper: The 4th Int. Conf. on Aluminum Alloys, Atlanta, GA, Sept. 11–16, 1994, The Georgia Institute of Technology, Atlanta, GA, 1994, pp. 620–27.
6. B.C. Meyer, E. Lectard, N. Serrano, E. Zschech, T. Hirsch, and P. Mayr: HTM, 1997, vol. 52, pp. 291–97.10.1515/htm-1997-520508 ↗
7. P. Heider: Lasergerechte Konstruktion und lasergerechte Fertigungsmittel zum Schweißen großformatiger Aluminium-Strukturbauteile, VDI-Verlag, Duesseldorf, 1994, pp. 20–25.
8. U. Krüger, U. Laudien, F. Lemke, and P.W. Nogossek: DVS-Gefügekatalog Schweißtechnik — Nichteisenmetalle, DVS-Verlag, Duesseldorf, 1987, p. 178.
9. R.E. Reed-Hill and R. Abbaschian: Physical Metallurgy Principles, 3rd ed., PWS-Kent Publishing Company, Boston, MA, 1992, pp. 268–69.
10. R.W. Cahn and P. Haasen: Physical Metallurgy, 4th ed., North-Holland, Amsterdam, 1996, pp. 535–668.
11. J. Burke: The Kinetics of Phase Transformation in Metals, 1st ed., Pergamon Press, 1965, pp. 170–75.
12. D. Radaj: Heat Effects of Welding, 1st ed., Springer-Verlag, New York, NY, 1992, pp. 133–35.10.1007/978-3-642-48640-1 ↗
13. P.A. Beck and P.R. Sperry: J. Appl. Phys., 1950, vol. 21, pp. 150–52.10.1063/1.1699614 ↗
14. R.A. Fournelle: Mater. Sci. Eng., 1991, vol. A138, pp. 133–45.10.1016/0921-5093(91)90683-E ↗
15. Y.J. Baik and D.N. Yoon: Acta Metall. Mater., 1990, vol. 38, pp. 1525–34.10.1016/0956-7151(90)90120-6 ↗
16. R.W. Cahn and P. Haasen: Physical Metallurgy, 4th ed., North-Holland, Amsterdam, 1996, pp. 843–942.