journal article·2005-01

Investigation of precipitation behavior in a weld deposit of 11Cr-2W ferritic steel

Dejun Li, Kenji Shinozaki, Hidemasa Harada, Kenji Ohishi

Publisher page

Abstract

This article is aimed at investigating the difference in precipitation behavior in the fine-grained heat-affected zone (FGHAZ), coarse-grained heat-affected zone (CGHAZ), and base metal for the welded joint of high Cr ferritic heat-resistant steel (11Cr-0.4Mo-2W-1Cu-V-Nb, normalized 1323 K×1 h and tempered 1033 K×1 h). Simulated HAZ (SHAZ) specimens were used, whose thermal cycles were controlled to be the same as those in the actual welded joint with peak temperatures of 1523 and 1173 K to represent CGHAZ and FGHAZ, respectively. Based on scanning electron microscopy (SEM) observation, it looks that the precipitates in FGHAZ specimens (1173 K) were fewer and larger than those in CGHAZ (1523 K) specimens and base metal specimens. This phenomenon implied that the growth and coarsening of precipitates in FGHAZ may play a role in the deterioration of creep properties and type IV cracking, which was observed in previous creep tests. X-ray diffraction analysis for the electrolytic extraction showed that the types of precipitates are the same for the 1173 K specimens and base metal specimens, including M23C6, MX, Laves phase, and μ phase. Further, the elemental analysis of the extraction showed that the mass percentages of Cr, W, and Mo in the precipitates to specimen mass were higher in the FGHAZ specimen than those in the base metal specimen, especially during the period between 600 and 2464 hours. Finally, a two-dimensional (2-D) model was proposed to simulate the precipitation behavior of the Laves phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. H. Cerjak, P. Hofer, and B. Schaffernak: Iron Steel Inst. Jpn. Int., 1999, vol. 39 (9), pp. 874–88.10.2355/isijinternational.39.874 ↗
2. H.K.D.H. Bhadeshia: Iron Steel Inst. Jpn. Int., 2001, vol. 41 (6), pp. 626–40.10.2355/isijinternational.41.626 ↗
3. F. Masuyama: Iron Steel Inst. Jpn. Int., 2001, vol. 41 (6), pp. 612–25.10.2355/isijinternational.41.612 ↗
4. H. Cerjak and E. Letofsky: Sci. Technol. Welding Joining, 1996, vol. 1 (1), pp. 36–42.10.1179/stw.1996.1.1.36 ↗
5. H.K.D.H. Bhadeshia: Proc. Int. Workshop on the Innovative Structural Materials for Infrastructure in 21st Century, Tsukuba, Japan, Jan. 2000, published by National Research Institute for Metals, Tsukuba, Japan, pp. 89–108.
6. E. Kozeschnik, P. Polt, S. Breet, and B. Buchmayr: Sci. Technol. Welding Joining, 2002, vol. 7, pp. 65–68.
7. E. Kozeschnik, P. Warbichler, I. Letofsky-Papst, S. Breet, and B. Buchmayr: Sci. Technol. Welding Joining, 2002, vol. 7, pp. 69–76.10.1179/136217102225003014 ↗
8. S.H. Lalam, H.K.D.H. Bhadeshia, and D.J.C. Mackay: Sci. Technol. Welding Joining, 2000, vol. 5, (3), pp. 135–60.10.1179/136217100101538137 ↗
9. S.H. Goods and L.M. Brown: Acta Mater., 1979, vol. 27, pp. 1–15.10.1016/0001-6160(79)90051-8 ↗
10. H. Morimoto, S. Ohkita, and H. Sakurai: J. Jpn. Welding Soc., 1997, vol. 15 (4), pp. 664–73.10.2207/qjjws.15.664 ↗
11. K. Laha, K.S. Chandravathi, K.B.S. Rao, S.L. Mannan, and D.H. Sastry: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 115–23.10.1007/s11661-001-0107-9 ↗
12. M. Matsui, M. Tabuchi, T. Watanabe, K. Kubo, J. Kinugawa, and F. Abe: Iron Steel Inst. Jpn. Int., 2001, vol. 41, Supplement, pp. 126–30.10.2355/isijinternational.41.Suppl_S126 ↗
13. H. Morimoto, T. Tanaka, S. Ohkita, and M. Fuji: J. Jpn. Welding Soc., 1998, vol. 16 (4), pp. 512–21.10.2207/qjjws.16.512 ↗
14. T. Ogata: J. Soc. Mater. Sci., Jpn., 1998, vol. 47 (3), pp. 253–59.10.2472/jsms.47.253 ↗
15. H. Cerjak and E. Letofsky: 7th Int. Welding symp., Kobe, Japan, Nov. 2001, Japan Welding Society, pp. 731–36.
16. H. Cerjak, P. Hofer, and B. Schaffernak: 5th Workshop on the UltraSteel, Tsukuba, Japan, Jan. 2001, published by National Research Institute for Metals, Tsukuba, Japan, pp. 158–63.
17. Y. Yutaka, K. Okamoto, and Y. Tokunaga: Tetsu-to-Hagane, 1995, vol. 81 (5), pp. 59–64.
18. K. Shinozaki, D. J. Li, H. Kuroki, H. Harada, and K. Ohishi: 7th Int. Welding Symp., Kobe, Japan, Nov. 2001, published by Japan Welding Society, Tokyo, Japan, pp. 743–48.
19. K. Shinozaki, D.J. Li, H. Kuroki, H. Harada, and K. Ohishi: Iron Steel Inst. Jpn. Int., 2002, vol. 42 (12), pp. 1578–84.10.2355/isijinternational.42.1578 ↗
20. T. Sourmail: Mater. Sci. Technol., 2001, vol. 17 (1), pp. 1–14.10.1179/026708301101508972 ↗
21. J. Cui, I.S. Kim, C.Y. Kang, and K. Mlyahara: Iron Steel Inst. Jpn. International, 2001, vol. 41 (4), pp. 368–71.10.2355/isijinternational.41.368 ↗
22. Kouda Shigeyasu: Introduction to Metal Physics, Corona Publishing Co. Ltd., Tokyo, 1982, p. 112.