journal article·2012-05

In-Situ Observations of Martensitic Transformation in Blast-Resistant Steel

Xinghua Yu, Sudarsanam Suresh Babu, John C. Lippold, Hidenori Terasaki, Yu-ichi Komizo

Publisher page

Abstract

A hybrid in-situ characterization system, which couples the laser scanning confocal microscopy (LSCM) with the time-resolved X-ray diffraction (TRXRD) measurement with synchrotron radiation, was used to characterize the microstructure evolution during heat-affected zone (HAZ) thermal cycling of high-strength and blast-resistant steel. The combined technique has a time resolution of 0.3 seconds that allows for high-fidelity measurements of transformation kinetics, lattice parameters, and morphological features. The measurements showed a significant reduction in the martensite start transformation temperature with a decrease in the prior austenite grain size. In addition, the LSCM images confirmed the concurrent refinement of martensite packet size with smaller austenite grain sizes. This is consistent with dilatometric observations. The austenite grain size also influenced the rate of transformation (df m /dT); however, the measurements from the hybrid (surface) and dilatometric (volume) measurements were inconsistent. Challenges and future directions of adopting this technique for comprehensive tracking of microstructure evolution in steels are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. A. Saha and G.B. Olson: J. Comput. Aided Mater. Des., 2007, vol. 14, pp. 177–200.10.1007/s10820-006-9031-z ↗
2. A. Saha and G.B. Olson: J. Comput. Aided Mater. Des., 2007, vol. 14, pp. 201–33.10.1007/s10820-006-9032-y ↗
3. X. Yu, J.L. Caron, S.S. Babu, J.C. Lippold, D. Isheim, and D.N. Seidman: Acta Mater., 2010, vol. 58, pp. 5596–5609.10.1016/j.actamat.2010.06.031 ↗
4. X. Yu, J.L. Caron, S.S. Babu, J.C. Lippold, D. Isheim, and D.N. Seidman: Metall. Mater. Trans. A, DOI:10.1007/s11661-011-0707-y.10.1007/s11661-011-0707-y ↗
5. S. Morito, H. Yoshida, T. Maki, and X. Huang: Mater. Sci. Eng. A, 2006, vol. 438, pp. 237–40.10.1016/j.msea.2005.12.048 ↗
6. H. Yin, T. Emi, and H. Shibata: Acta Mater., 1999, vol. 47, pp. 1523–35.10.1016/S1359-6454(99)00022-1 ↗
7. A.M. Elwazri, P. Wanjara, M. Brochu, and S. Yue: Microsc. Microanal., 2005, vol. 11, pp. 634–35.
8. D.J. Phelan, M.H. Reid, and R.J. Dippenaar: Microsc. Microanal., 2005, vol. 11, pp. 670–71.10.1017/S1431927605509693 ↗
9. N. Oku, K. Asakura, J. Inoue, and T. Koseki: Trends in Welding Research, Proc. 8th Int. Conf., ASM International, Materials Park, OH, 2009, pp. 272–76.
10. Y. Komizo and H. Terasaki: Sci. Technol. Weld. Join., 2011, vol. 16, pp. 56–60.10.1179/136217110X12785889549868 ↗
11. Y. Komizo and H. Terasaki: Sci. Technol. Weld. Join., 2011, vol. 16, pp. 61–67.10.1179/1362171810Y.0000000008 ↗
12. J.W. Elmer, J. Wong, and T. Ressler: Scripta Mater., 2000, vol. 43, pp. 751–57.10.1016/S1359-6462(00)00481-4 ↗
13. S.S. Babu, J.W. Elmer, J.M. Vitek, and J.M. David: Acta Mater., 2002, vol. 50, pp. 4763–81.10.1016/S1359-6454(02)00317-8 ↗
14. J. Wong, Ressler, and J.W. Elmer: J. Synchrotron Rad., 2003, vol. 10, pp. 154–67.10.1107/S0909049502020289 ↗
15. S.S. Babu, E.D. Specht, S.A. David, E. Karapetrova, P. Zschack, M. Peet, and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3281–89.10.1007/s11661-005-0002-x ↗
16. H.J. Stone, M.J. Peet, H.K.D.H. Bhadeshia, P.J. Withers, S.S. Babu, and E.D. Specht: Proc. R. Soc. A, 2009, vol. 464, pp. 1009–27.10.1098/rspa.2007.0201 ↗
17. S.E. Offerman, N.H. van Dijk, J. Sietsma, S. Grigull, E.M. Lauridsen, L. Margulies, H.F. Poulsen, M.T. Rekveldt, and S. van der Zwaag: Science, 2002, vol. 298, pp. 1003–05.10.1126/science.1076681 ↗
18. Y. Komizo and H. Terasaki: Sci. Technol. Weld. Join., 2011, vol. 16, pp. 79–86.10.1179/136217110X12785889549822 ↗
19. H.K.D.H. Bhadeshia: J. Phys. Coll. C4, 1982, vol. 43, pp. C-435–441.10.1051/jphyscol:1982467 ↗
20. C. Broennimann, E.F. Eikenberry, B. Henrichn, R. Horisberger, G. Huelsen, E. Pohl, B. Schmitt, C. Schulze-Briese, M. Suzuki, T. Tomizaki, H. Toyokawa, and A. Wagner: J. Synchrotron Rad., 2006, vol. 13, pp. 120–30.10.1107/S0909049505038665 ↗
21. A.P. Hammersley, S.O. Svensson, M. Hanfland, A.N. Fitch, and D. Häusermann: High Press. Res., 1996, vol. 14, pp. 235–48.10.1080/08957959608201408 ↗
22. A.P. Hammersley: ESRF Internal Report No. ESRF97HA02A, ESRF, Grenoble, Cedex, France, 1997.
23. H. Terasaki and Y. Komizo: Scripta Mater., 2011, vol. 64, pp. 29–32.10.1016/j.scriptamat.2010.08.055 ↗
24. H. Terasaki: JWRI, Osaka University, Osaka, unpublished research, 2011.
25. H.K.D.H. Bhadeshia and R.W.K. Honeycombe: Steels: Microstructure and Properties, Butterworth-Heinemann, Oxford, United Kingdom, 2006.
26. G. Eldis: in Hardenability Concepts with Applications to Steel, AIME, New York, NY, 1978, pp. 126–57.
27. S.S. Babu: Ph.D. Thesis, University of Cambridge, Cambridge, United Kingdom, 1992.
28. B.D. Cullity: Elements of X-Ray Diffraction, Addison-Wesley Publishing Inc., Reading, MA, 1978.
29. H.S. Yang and H.K.D.H. Bhadeshia: Scripta Mater., 2007, vol. 60, pp. 493–95.10.1016/j.scriptamat.2008.11.043 ↗
30. T.H. Kannengiesser, S.S. Babu, Y. Komizo, and A.J. Ramirez, eds., In-Situ Studies with Photons, Neutrons and Electrons Scattering, 1st ed., Springer, New York, NY, 2010.10.1007/978-3-642-14794-4 ↗
31. J.O. Andersson, T. Helander, L. Höglund, P.F. Shi, and B. Sundman: CALPHAD, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
32. L. Beres, Z. Beres, and W. Irmer: Weld. Cutt., 1994, vol. 8, pp. 128–30.
33. E. Hornbogen: Int. Mater. Rev., 1989, vol. 34, pp. 277–96.10.1179/imr.1989.34.1.277 ↗
34. M. Tarafder, I. Chattoraj, S. Tarafder, and M. Nasipuri: Mater. Sci. Technol., 2009, vol. 25, pp. 542–48.10.1179/174328408X323104 ↗
35. H. Sharma, A. Wattjes, M. Amirthalingam, T. Zuidwijk, N. Geerlofs, and S.E. Offerman: Rev. Scientific Instrum., 2009, vol. 80, p. 123301.10.1063/1.3262501 ↗