Hydride-Phase Formation and its Influence on Fatigue Crack Propagation Behavior in a Zircaloy-4 Alloy
Source abstract
Abstract
The hydride-phase formation and its influence on the fatigue behavior of a Zircaloy-4 alloy charged with hydrogen gas are investigated. First, the microstructure and fatigue crack propagation rate of the alloy in the as-received condition are studied. Second, the formation and homogeneous distribution of the delta zirconium hydride in the bulk and its effect on the fatigue crack propagation rate are presented. The results show that in the presence of hydrides, the zirconium alloy exhibits reduced toughness and enhanced crack growth rates. Finally, the influence of a preexisting fatigue crack in the specimen and the subsequent hydride formation are examined. The residual lattice strain profile around the fatigue crack tip is measured using neutron diffraction. It is observed that the combined effects of residual strains and hydride precipitation on the fatigue behavior are more severe leading to propagation of the crack under near threshold loading.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Hydrogen embrittlement and corrosion behaviors in metals · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. V. Quach and D.O. Northwood: Metallography, 1984, vol. 17, pp. 191–201.10.1016/0026-0800(84)90022-3 ↗
2. G. Bertolino, J. Perez Ipina, and G. Meyer: J. Nucl. Mater., 2006, vol. 348, pp. 205–12.10.1016/j.jnucmat.2005.09.017 ↗
3. E.C.W. Perryman: J. Br. Nucl. Energ Soc., 1978, vol. 17 (2), pp. 95–105.
4. J. Lufrano, P. Sofronis, and H.K. Birnbaum: J. Mech. Phys. Solids, 1998, vol. 46, pp. 1497–1520.10.1016/S0022-5096(98)00054-4 ↗
5. J. Lufrano, P. Sofronis, and H.K. Birnbaum: J. Mech. Phys. Solids, 1996, vol. 44, no. 2, pp. 179–205.10.1016/0022-5096(95)00075-5 ↗
6. S. Sagat, S.Q. Shi, and M.P. Puls: Mater. Sci. Eng. A, 1994, vol. 176, pp. 237–47.10.1016/0921-5093(94)90981-4 ↗
7. R. Dutton, K. Nuttall, M.P. Puls, and L.A. Simpson: Metall. Trans. A, 1977, vol. 8A, pp. 1553–62.10.1007/BF02644858 ↗
8. L.A. Simpson and M.P. Puls: Metall. Trans. A, 1979, vol. 10A, p. 1093.10.1007/BF02811655 ↗
9. W.W. Gerberich, Y.T. Chen, and C. St. John: Metall. Trans. A, 1975, vol. 6, no. 8, pp. 1485–98.10.1007/BF02641960 ↗
10. J.- H. Huang and C.-S Ho: Mater. Chem. Phys., 1997, vol. 47, pp. 184–92.10.1016/S0254-0584(97)80049-1 ↗
11. S. Suresh: Fatigue of Materials, 2nd ed, Cambridge University Press, New York, NY. 1998.10.1017/CBO9780511806575 ↗
12. Y. Sun, H. Choo, P.K. Liaw, Y. Lu, B. Yang, D.W. Brown, and M.A.M. Bourke: Scripta Mater., 2005, vol. 53, pp. 971–75.10.1016/j.scriptamat.2005.06.019 ↗
13. T.M. Holden, J.H. Root, R.A. Holt, and P.A. Turner: J. Nucl. Mater., 2002, vol. 304, pp. 73–82.10.1016/S0022-3115(02)00846-2 ↗
14. J.D. Almer, J.B. Cohen, and R.A. Winholtz: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2127–36.10.1007/s11661-998-0038-9 ↗
15. E. Garlea, B. Clausen, E.A. Kenik, D. Ciurchea, S.C. Vogel, J.W.L. Pang, and H. Choo: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1255–60.10.1007/s11661-010-0182-x ↗
16. E. Garlea, V.O. Garlea, H. Choo, C.R. Hubbard, and P.K. Liaw: Mater. Sci. Forum, 2007, vols. 539–543, pp. 1443–48.10.4028/www.scientific.net/MSF.539-543.1443 ↗
17. Wah Chang Company Technical Department, www.wahchang.com, 2010.
18. ASTM E647-86, Annual Book of ASTM Standards, 1986, pp. 714–36.
19. J. Harris, and S. Andersson: Phys. Rev. Lett., 1985, vol. 55, pp. 583–1586.
20. G.F.V. Voort: Metallography, Principles and Practice, ASM, Materials Park, OH, 1984, p. 701.10.31399/asm.tb.mpp.9781627082600 ↗
21. ASTM B 811, “Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding”, 2007, p. 6.
22. H. Tada, P.C. Paris, and G.R. Irwin: The Stress Analysis of Cracks Handbook, Paris Productions, St. Louis, MO, 1985.
23. A. Saxena and S.J. Hudak Jr., Int. J. Fracture, 1978, vol. 14, no. 5, pp. 453–68.10.1007/BF01390468 ↗
24. L.J. Chen, P.K. Liaw, R.L. McDaniels, and D.L. Klarstrom: Metall. Mater. Trans. A, 2003, vol. 34 A, pp. 1451–60.10.1007/s11661-003-0257-z ↗
25. M.A.M. Bourke, D.C. Dunand, and E Üstündag: Appl. Phys. A, 2002, vol. 74, pp. S1707–09.10.1007/s003390201747 ↗
26. H.M. Rietveld: J. Appl. Cryst., 1969, vol. 2, pp. 65–71.10.1107/S0021889869006558 ↗
27. A.C. Larson and R.B. Von Dreele: General Structure Analysis System (GSAS), Los Alamos National Laboratory Report LAUR, http://www.ncnr.nist.gov/xtal/software/gsas.html, 2000, pp. 86–748.
28. ImageJ software: http://rsb.info.nih.gov/ij/.
29. ASTM E 562, “Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count”, 2002.
30. R.A. Holt: J. Nucl. Mater., 1970, vol. 35, pp. 322–34.10.1016/0022-3115(70)90216-3 ↗
31. D. Ciurchea, A.V. Pop, C. Gheorghiu, I. Furtuna, M. Todica, A. Dinu, and M. Roth: J. Nucl. Mater., 1996, vol. 231, pp. 83–91.10.1016/0022-3115(96)00350-9 ↗
32. J.H. Root, W.M. Small, D. Khatamian, and O.T. Woo: Acta Mater., 2003, vol. 51, pp. 2041–53.10.1016/S1359-6454(03)00004-1 ↗
33. A. Steuwer, J.R. Santisteban, M. Preuss, M.J. Peel, T. Buslaps, and M. Harada: Acta Mater., 2009, vol. 57, pp. 145–52.10.1016/j.actamat.2008.08.061 ↗
34. G. Bertolino, G. Meyer, and J.P. Ipina: J. Nucl. Mater., 2003, vol. 320, pp. 272–79.10.1016/S0022-3115(03)00193-4 ↗
35. A.W. Funkenbush and L.F. Coffin: Metall. Trans. A, 1978, vol. 9A, pp. 1159–67.10.1007/BF02652221 ↗
36. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 4th ed., Wiley, New York, NY, 1996, pp. 591–686.
37. P.K. Liaw, T.R. Leax, and J.K. Donald: Acta Metall., 1987, vol. 35, no. 7, pp. 1415–32.10.1016/0001-6160(87)90088-5 ↗
38. S. Suresh and R.O. Ritchie: Metall. Trans. Phys. Metall. Mater., 1982, vol. 13, no. 9, pp. 1627–31.10.1007/BF02644803 ↗
39. P.K. Liaw and W.A. Logsdon: Eng. Fract. Mech., 1985, vol. 22, no. 1, pp. 115–21.10.1016/0013-7944(85)90164-X ↗
40. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng. A, 1994, vol. 176, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
41. J. Lufrano and P. Sofronis: Acta Mater., 1998, vol. 46, no. 5, pp. 1519-26.10.1016/S1359-6454(97)00364-9 ↗
42. W.S. Gorsky: Phys. Zeitschr. Sowjetunion, 1935, vol. 8, pp. 457.
43. H. Numakura: Solid State Phenom., 2003, vol. 89, pp. 93–114.10.4028/www.scientific.net/SSP.89.93 ↗