A single-grain approach applied to the modeling of recrystallization kinetics for cold-rolled single-phase metals
Source abstract
Abstract
A comprehensive model for the recrystallization kinetics is proposed which incorporates both microstructure and the textural components in the deformed state. The model is based on the single-grain approach proposed previously. The influence of the as-deformed grain orientation, which affects the stored energy via subgrain size and sub-boundary misorientation, is taken into account. The effects of the deformed grain geometry, the nucleation-site density, and the initial grain size prior to deformation on the recrystallization kinetics are assessed. The model is applied to the recrystallization kinetics of a cold-rolled AA1050 alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. F.J. Humphreys and M. Haltherly: Recrystallization and Related Annealing Phenomena, Pergamon, London, 1996.
2. R.A. Vandermeer and P. Gordon: Recovery and Recrystallization of Metals, Interscience, New York, NY, 1962.
3. R.A. Vandermeer and B.B. Rath: Metall. Trans. A, 1990, vol. 21A, pp. 1143–49.10.1007/BF02656534 ↗
4. R.A. Vandermeer and B.B. Rath: Metall. Trans. A, 1989, vol. 20A, pp. 391–401.10.1007/BF02653918 ↗
5. E.C.W. Perryman: Trans. AIME, J. Met., 1955, vol. 203, pp. 1053–61.
6. R.A. Vandermeer and B.B. Rath: in Simulation and Theory of Evolving Microstructures, M.P. Anderson and A.D. Rollett, eds., TMS, Warrendale, PA, 1990, pp. 119–26.
7. S.P. Chen, I. Todd, and S. van der Zwaag: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 529–37.10.1007/s11661-002-0115-4 ↗
8. L. Delannay, O.V. Mishin, D.J. Jensen, and P. van Houtte: Acta Mater., 2001, vol. 49, pp. 2441–51.10.1016/S1359-6454(01)00150-1 ↗
9. V. Randle, H. Hansen, and D.J. Jensen: Phil. Mag. A, 1996, vol. 73, pp. 265–82.10.1080/01418619608244382 ↗
10. T. Furu, K. Marthinsen, and E. Nes: Mater. Sci. Technol., 1990, vol. 6, pp. 1093–102.10.1179/mst.1990.6.11.1093 ↗
11. A.D. Rollett, D.J. Srolovitz, R.D. Doherty, and M.P. Anderson: Acta Metall., 1989, vol. 37, pp. 627–39.10.1016/0001-6160(89)90247-2 ↗
12. E. Nes and J.K. Solberg: Mater. Sci. Technol., 1986, vol. 2, pp. 19–23.10.1179/mst.1986.2.1.19 ↗
13. E.C.W. Perryman: Trans. AIME, J. Met., 1955, vol. 203, pp. 369–78.
14. I.L. Dillamore and H. Katoh: Met. Sci., 1974, vol. 8, pp. 73–83.10.1179/msc.1974.8.1.73 ↗
15. W.B. Hutchinson: Met. Sci., 1974, vol. 8, pp. 185–96.10.1179/msc.1974.8.1.185 ↗
16. D.P. Field and H. Weiland: Mater. Sci. Forum, 1994, vol. 157–162, pp. 1181–88.10.4028/www.scientific.net/MSF.157-162.1181 ↗
17. X.Y. Wen and W.B. Lee: in Sheet Metal Forming Technology, M.Y. Demeri, eds., TMS, Warrendale, PA, 1999, pp. 233–43.
18. E.M. Lauridsen, D.J. Jensen, H.F. Poulsen, and U. Lienert: Scripta Mater., 2000, vol. 43, pp. 561–6.10.1016/S1359-6462(00)00430-9 ↗
19. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
20. S.P. Chen, D. Hanlon, S. van der Zwaag, Y.T. Pei, and J.T.M. de Hosson: J. Mater. Sci., 2002, vol. 37, pp. 989–95.10.1023/A:1014356116058 ↗
21. J. Gil Sevillano, P. van Houtte, and E. Aernoudt: Scripta Metall., 1976, vol. 10, pp. 775–78.10.1016/0036-9748(76)90361-6 ↗
22. J. Gil Sevillano, P. van Houtte, and E.A.D. Aernoudt: Progress. Mater. Sci., 1980, vol. 25, pp. 69–412.10.1016/0079-6425(80)90001-8 ↗
23. N. Hansen and D.A. Hughes: Phys. Status Solidi (b), 1995, vol. 149, pp. 155–72.10.1002/pssa.2211490111 ↗
24. F.J. Humphreys: Acta Mater., 1997, vol. 45, pp. 4231–40.10.1016/S1359-6454(97)00070-0 ↗
25. C.M. Sellars: in Thermomechanical Processing in Theory, Modeling & Practice [TMP] 2, B. Hutchinson et al., eds., Swedish Society for Metals Technology, ASM Stockhelm, Sweden, 1996, pp. 35–51.
26. H.E. Vatne, T. Furu, R. Orsund, and E. Nes: Acta Mater., 1996, vol. 44, pp. 4463–73.10.1016/1359-6454(96)00078-X ↗
27. H.J. Bunge: Texture Analysis in Materials Science, Butterworth and Co., London, 1982.
28. J.C. Blade and P.L. Morris: Proc. 4th Int. Conf. on Textures, Cambridge, Cambridge University Press, United Kingdom, 1975, pp. 171–78.
29. L. Ryde, W.B. Hutchinson, and S. Jonsson: in Recrystallization ’90, T. Chandra, eds., TMS, Warrendale, PA, 1990, pp. 313–18.
30. P. Cotterill and P.R. Mould: Recrystallization and Grain Growth in Metals, Surrey University Press, London, 1976.
31. P.L. Orsetti Rossi and C.M. Sellars: Aluminium Alloys, Their Physical and Mechanical Properties, Proc. 6th Int. Conf. on Aluminium Alloys, ICAA-6, T. Sato, S. Kumai, T. Kobayashi, and Y. Murakami, eds., The Japan Institute of Light Metals, Toyohashi, Japan, 1998, vol. 2, pp. 1227–32.
32. N. Hansen and D.J. Jensen: Metall. Trans. A, 1986, vol. 17A, pp. 253–59.10.1007/BF02643901 ↗