Hydrogen Effect on Nanomechanical Properties of the Nitrided Steel
Source abstract
Abstract
In situ electrochemical nanoindentation is used to examine the effect of electrochemically charged hydrogen on mechanical properties of the nitride layer on low-alloy 2.25Cr-1Mo martensitic structural steel. By application of this method, we were able to trace the changes in the mechanical properties due to the absorption of atomic hydrogen to different depths within the compound and diffusion layers. The results clearly show that the hydrogen charging of the nitriding layer can soften the layer and reduce the hardness within both the compound and the diffusion layers. The effect is completely reversible and by removal of the hydrogen, the hardness recovers to its original value. The reduction in hardness of the nitride layer does not correlate to the nitrogen concentration, but it seems to be influenced by the microstructure and residual stress within the compound and diffusion layers. Findings show that nitriding can be a promising way to control the hydrogen embrittlement of the tempered martensitic steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. C. X. Li and T. Bell: Corros. Sci, 2006, vol.48, pp. 2036-49.10.1016/j.corsci.2005.08.011 ↗
2. R. L. Klueh, N. Hashimoto and P. J. Maziasz: Scripta Mater., 2005, vol.53, 275-280.10.1016/j.scriptamat.2005.04.019 ↗
3. A. Barnoush and H. Vehoff: Corros. Sci, 2008, vol.50, pp. 259-267.10.1016/j.corsci.2007.05.026 ↗
4. M. Asgari, A. Barnoush, R. Johnsen and R. Hoel: Corros. Sci, 2012, vol.62, pp. 51-60.10.1016/j.corsci.2012.04.046 ↗
5. V. Ngomo, S. Fonlupt, L. Coudreuse, G. Baron, E. Doucet (2011) NACE International 2011. Publications Division, Houston, Texas.
6. P. Fassina, F. Bolzoni, G. Fumagalli, L. Lazzari, L. Vergani and A. Sciuccati: Eng. Fract. Mech, 2010, vol.81, pp. 43-55.10.1016/j.engfracmech.2011.09.016 ↗
7. P. Fassina, F. Bolzoni, G. Fumagalli, L. Lazzari, L. Vergani and A. Sciuccati, Procedia Engineering: 2011, vol.10, pp. 3226-34.10.1016/j.proeng.2011.04.533 ↗
8. C. Barbosa, S. M. C. de Souza, R. O. Centeno, I.C. Abud and O.B. Ferraz: Eng. Fail. Anal, 2006, vol.13, pp. 1076-91.10.1016/j.engfailanal.2005.07.014 ↗
9. J. Cwiek and M. Baczynska: Arch. Mater. Sci. and Eng, 2010, vol.43, pp. 30-41.
10. R. L. Klueh: J. Nucl. Mater, 1977, vol.68, pp. 294-307.10.1016/0022-3115(77)90254-9 ↗
11. A. Barnoush and H. Vehoff: Acta Mater, 2010, vol.58, pp. 5274 - 85.10.1016/j.actamat.2010.05.057 ↗
12. P. Schaaf: Prog. Mater. Sci, 2002, vol.47, pp. 1-16.10.1016/S0079-6425(00)00003-7 ↗
13. W. C. Oliver and G. M. Pharr: J. Mater. Res, 2004, vol.19, pp. 3-20.10.1557/jmr.2004.19.1.3 ↗
14. A. Barnoush and H. Vehoff: Int. J. Mater. Res, 2006, vol.97, pp. 1224-29.10.1515/ijmr-2006-0193 ↗
15. A. Barnoush, B. Yang, H. Vehoff: Advances in Solid State Physics, vol. 47. Springer, Berlin, 2008, p. 253–269.10.1007/978-3-540-74325-5_20 ↗
16. J. Pilling and N. Ridley: Metall. Trans. A, 1982, vol.13, pp. 557-563.10.1007/BF02644419 ↗
17. D.R.G Mitchell, C. J. Ball (2001) Mater. Charact. 47:17–26.10.1016/S1044-5803(01)00147-4 ↗
18. http://gwyddion.net/.
19. K. Durst, B. Backes and M. Goken: Scripta Mater., 2005, vol.52, pp. 1093-97.10.1016/j.scriptamat.2005.02.009 ↗
20. E. Lunarska, O. Chernyayeva, D. Lisovytskiy and R. Zachariasz (2010) Mater. Sci. Eng. C 30:181–89.10.1016/j.msec.2009.09.016 ↗
21. A. Barnoush, M. Asgari and R. Johnsen: Scripta Mater., 2012, vol.66, pp. 414-417.10.1016/j.scriptamat.2011.12.004 ↗
22. M. Asgari, A. Barnoush, R. Johnsen and R. Hoel: Tribol. Int. 2012, submitted.
23. A. Barnoush: Acta Mater, 2012, vol.60, pp. 1268-77.10.1016/j.actamat.2011.11.034 ↗
24. A. Martinavicius, G. Abrasonis, A. C. Scheinost, R. Danoix, F. Danoix, G. Stinville, J. C. Talut, C. Templier, O. Liedke, S. Gemming and W. Moller: Acta Mater, 2012, vol.60, pp. 4065-76.10.1016/j.actamat.2012.04.014 ↗
25. Y. Sun and T. Bell: Mater. Sci. Eng. A, 1991, vol. 140, pp. 419–434.10.1016/0921-5093(91)90458-Y ↗
26. S. Jegou, L. Barrallier and R. Kubler: Acta Mater, 2010, vol.58, pp. 2666-76.10.1016/j.actamat.2009.12.053 ↗
27. D. R. Trinkle and C. Woodward: Science, 2005, vol.310, pp. 1665-67.10.1126/science.1118616 ↗
28. E. Pink and R.J. Arsenault: Prog. Mater. Sci, 1980, vol.24, pp. 1-50.10.1016/0079-6425(79)90003-3 ↗
29. A. Sato and M. Meshii: Acta Mater, 1973, vol.21, pp. 753-768.10.1016/0001-6160(73)90040-0 ↗
30. A. Kimura and H. K. Birnbaum: Scripta Mater., 1987, vol.21, pp. 53-57.10.1016/0036-9748(87)90406-6 ↗
31. E. Lunarska, O. Chernyayeva, D. Lisovytskiy, R. Zachariasz (2010) Mater. Sci. Eng. C 30:181-189.10.1016/j.msec.2009.09.016 ↗
32. H. Matsui, H. Kimura and A. Kimura: Mater. Sci. Eng, 1979, vol.40, pp. 227-234.10.1016/0025-5416(79)90193-9 ↗
33. H. Matsui, H. Kimura and S. Moriya: Mater. Sci. Eng, 1979, vol.40, pp. 207-216.10.1016/0025-5416(79)90191-5 ↗
34. T. Y. Zhang, W. Y. Chu and C. M. Hsiao: Scripta Mater., 1986, vol.20, pp. 225-230.10.1016/0036-9748(86)90131-6 ↗
35. S. X. Xie and J. P. Hirth: Mater. Sci. Eng, 1983, vol.60, pp. 207-212.10.1016/0025-5416(83)90003-4 ↗
36. J. Eastman, F. Heubaum, T. Matsumoto and H. K. Birnbaum: Acta Mater, 1982, vol.30, pp. 1579–86.10.1016/0001-6160(82)90178-X ↗