Effect of Solid Fraction and Pressure on Microstructure and Mechanical Properties and Reduction in Liquid Segregation in the Thixo-Die-Casting Process with Al-7 Pct Si Alloy
Source abstract
Abstract
In the thixo-die-casting process, the effect of solid fraction and the applied pressure on filling behavior and mechanical properties of the thixo-die-cast product were investigated. By controlling the behavior of solid particles in thixo materials, reduction in liquid segregation during thixo-die-casting was achieved by varying gating systems and solid fractions. Therefore, a gating system with a specially designed runner and gate that controls microstructure to reduce liquid segregation was proposed. As a result, the filling behavior of the semisolid material was dominantly influenced by a solid fraction and a gating system. In addition, mechanical properties were analyzed as a function of solid fraction and applied pressure. The quality index, which assesses ultimate tensile strength (UTS) and elongation, showed that as the initial solid fraction and applied pressure increased, the quality index increased by about 100 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. M.C. Flemings: Metall. Trans. A, 1991, vol. 22A, pp. 957–8110.1007/BF02661090 ↗
2. D.H. Kirkwood: Int. Mater. Rev., 1994, vol. 39, pp. 173–8910.1179/imr.1994.39.5.173 ↗
3. K. Kitamura, Y. Ando, K. Hironaka, and C. Yahata: Proc. 3rd Int. Conf. on Semisolid Processing of Alloys and Composites, M. Kiuchi, ed., Institute of Industrial Science, Tokyo, 1994, pp. 181–90
4. E.J. Vinarcik, J.D. Taylor, and K. Farris: Proc. 5th Int. Conf. on Semisolid Processing of Alloys and Composites, Golden, CO, 1998, pp. 105–13
5. C.G. Kang, Y.I. Son, S.W. Youn: J. Mater. Process. Technol., 2001, vol. 113, pp. 251–5610.1016/S0924-0136(01)00707-5 ↗
6. W.G. Cho, C.G. Kang: J. Mater. Process. Technol., 2000, vol. 105, pp. 269–7710.1016/S0924-0136(00)00577-X ↗
7. S. Midson, V. Rudnev, and R. Gallik: Proc. 5th Int. Conf. on Semisolid Processing of Alloys and Composites, Golden, CO, 1998, pp. 497–504
8. R. Sauermann, B. Friedrich, W. Puttgen, W. Bleck, E. Balichev, B. Hallstedt, J.M. Schneider, H. Bramann, A. Buhrig-Polaczek, and P.J. Uggowitzer: Proc. 8th S2P Semi-solid processing, A. Alexandrou and D. Apelian, eds., Amathus Hotel, Limassol, Cyprus, hosted by the University of Cyprus and the Metal Processing Institute at WPI (USA), Sept. 21–23, 2004, pp. 887–904
9. A. Pola, R. Roberti, E. Bertoli, D. Furloni: Solid State Phenom., 2006, vols. 116–117, pp. 58–6310.4028/www.scientific.net/SSP.116-117.58 ↗
10. A. Forn, J.A. Picas, M.T. Baile, S. Menargues, V.G. Garcia: Solid State Phenom., 2006, vols. 116–117, pp. 80–8310.4028/www.scientific.net/SSP.116-117.80 ↗
11. Y. Yitao, Z. Henghua, S. Guangjie: Solid State Phenom., 2006, vols. 116–117, pp. 630–34
12. C.G. Kang, H.K. Jung: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 363–7210.1007/s11663-001-0059-x ↗
13. H.K. Jung, C.G. Kang: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2967–7710.1007/s11661-999-0134-5 ↗
14. C.G. Kang, Y.I. Son, S.W. Youn: J. Mater. Process. Technol., 2001, vol. 113, pp. 251–5610.1016/S0924-0136(01)00707-5 ↗
15. S.W. Youn, C.G. Kang: Mater. Chem. Phys., 2006, vol. 100 (1), pp. 117–2310.1016/j.matchemphys.2005.12.019 ↗
16. C.G. Kang, Y.J. Jung, S.W. Youn: J. Mater. Process. Technol., 2003, vol. 135, pp. 158–7110.1016/S0924-0136(02)00871-3 ↗
17. C.G. Kang, P.K. Seo, B.M. Kim: J. Mater. Sci. Forum, 2005, vols. 475–479, pp. 377–81
18. C.G. Kang, P.K. Seo, S.S. Kang: J. Mater. Process. Technol., 2006, vol. 176, pp. 32–4010.1016/j.jmatprotec.2006.02.002 ↗
19. C.G. Kang, P.K. Seo, B.M. Kim: J. Mater. Sci. Forum, 2005, vols. 475–479, pp. 2533–348310.4028/www.scientific.net/MSF.475-479.2533 ↗
20. “Standard Testing Methods for Tension Testing of Metallic Materials [Metric],” ASTM standard E 8M–04, ASTM, Philadelphia, PA, 2004, pp. 1–25
21. Z. Fan: Int. Mater. Rev., 2002, vol. 47 (2), pp. 49–8510.1179/095066001225001076 ↗
22. P.K. Seo, D.U. Kim, C.G. Kang: J. Mater. Process. Technol., 2002, vols. 162–163, pp. 570–78
23. M. Drouzy, S. Jacob, M. Richard: AFS Int. Cast. Mater. J., 1980, vol. 15, pp. 43–50