journal article·2015-09Open access

Determination of Multiple Near-Surface Residual Stress Components in Laser Peened Aluminum Alloy via the Contour Method

M. Burak Toparli, Michael E. Fitzpatrick, Salih Gungor

Abstract

In this study, residual stress fields, including the near-surface residual stresses, were determined for an Al7050-T7451 sample after laser peening. The contour method was applied to measure one component of the residual stress, and the relaxed stresses on the cut surfaces were then measured by X-ray diffraction. This allowed calculation of the three orthogonal stress components using the superposition principle. The near-surface results were validated with results from incremental hole drilling and conventional X-ray diffraction. The results demonstrate that multiple residual stress components can be determined using a combination of the contour method and another technique. If the measured stress components are congruent with the principal stress axes in the sample, then this allows for determination of the complete stress tensor.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Advanced machining processes and optimization · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. A.H. Clauer: in Proceedings of Surface Performance of Titanium, J.K. Gregory, H.J. Rack, and D. Eylon, eds., The Metal Society of AIME, TMS Warrendale, PA, 1996, pp. 217–30.
2. M. Obata, Y. Sano, N. Mukai, M. Yoda, S. Shima, and M. Kanno: in The Seventh International Conference on Shot Peening, A. Nakonieczny, ed., Warsaw, Poland, 1999, pp. 387–94.
3. P. Peyre and R. Fabbro, Optical and Quantum Electronics 1995, vol. 27, pp. 1213-1229.10.1007/BF00326477 ↗
4. Y. Sano, N. Mukai, and M. Obata: in The Tenth International Conference on Shot Peening, K. Tosha, ed., Tokyo, 2008.
5. P. Peyre, R. Fabbro, P. Merrien and H. P. Lieurade, Materials Science and Engineering A 1996, vol. 210, pp. 102-113.10.1016/0921-5093(95)10084-9 ↗
6. M.B. Prime and A.R. Gonzales: in Sixth International Conference on Residual Stresses, G.A. Webster, ed., Maney Publishing: Oxford, 2000, pp. 617–624.
7. M.B. Prime and A.L. Kastengren: in SEM Annual Conference & Exposition on Experimental and Applied Mechanics, T. Proulx, ed., Indianapolis, Indiana, 2010, p paper # 507.
8. A. DeWald and M. Hill, Experimental Mechanics 2006, vol. 46, pp. 473-490.10.1007/s11340-006-8446-5 ↗
9. M. E. Kartal, C. D. M. Liljedahl, S. Gungor, L. Edwards and M. E. Fitzpatrick, Acta Materialia 2008, vol. 56, pp. 4417-4428.10.1016/j.actamat.2008.05.007 ↗
10. M. B. Prime, M. A. Newborn and J. A. Balog, Materials Science Forum 2003, vol. 426-432, pp. 435-44010.4028/www.scientific.net/MSF.426-432.435 ↗
11. P. Pagliaro, M. Prime, H. Swenson and B. Zuccarello, Experimental Mechanics 2010, vol. 50, pp. 187-194.10.1007/s11340-009-9280-3 ↗
12. P. Pagliaro, M. Prime, J. S. Robinson, B. Clausen, H. Swenson, M. Steinzig and B. Zuccarello, Experimental Mechanics 2011, vol. 51, pp. 1123-1134.10.1007/s11340-010-9424-5 ↗
13. F. Hosseinzadeh and P. J. Bouchard, Experimental Mechanics 2013, vol. 53, pp. 171-181.10.1007/s11340-012-9627-z ↗
14. M. B. Toparli, M. E. Fitzpatrick and S. Gungor, Experimental Mechanics 2013, vol. 53, pp. 1705-1718.10.1007/s11340-013-9766-x ↗
15. U.C. Heckenberger, E. Hombergsmeier, V. Holzinger and W. von Bestenbostel, International Journal of Structural Integrity 2011, vol. 2, pp. 22-33.10.1108/17579861111108581 ↗
16. M.E. Fitzpatrick, A.T. Fry, P. Holdway, F.A. Kandil, and L. Suominen: The National Physical Laboratory (NPL), 2005.
17. B. Clausen, T. Lorentzen and T. Leffers, Acta Materialia 1998, vol. 46, pp. 3087-3098.10.1016/S1359-6454(98)00014-7 ↗
18. P.V. Grant, J.D. Lord, and P. Whitehead: The National Physical Laboratory (NPL), 2006.
19. G. S. Schajer, Journal of Engineering Materials and Technology 1988, vol. 110, pp. 344-349.10.1115/1.3226060 ↗
20. M. Prime, R. Sebring, J. Edwards, D. Hughes and P. Webster, Experimental Mechanics 2004, vol. 44, pp. 176-184.10.1007/BF02428177 ↗
21. H. F. Bueckner, Transactions of the American Society of Mechanical Engineers 1958, vol. 80, pp. 1225-1230.10.1115/1.4012657 ↗
22. M. B. Prime, Journal of Engineering Materials and Technology 2001, vol. 123, pp. 162-16810.1115/1.1345526 ↗
23. Y. Zhang, In The Materials Engineering, (The Open University: Milton Keynes, 2004).
24. M. B. Toparli and M. E. Fitzpatrick, Materials Science Forum 2014, vol. 772, pp. 167-172.10.4028/www.scientific.net/MSF.772.167 ↗
25. S. Spooner and X.-L. Wang, Journal of Applied Crystallography 1997, vol. 30, pp. 449-455.10.1107/S0021889897000174 ↗
26. M. D. Olson, A. T. DeWald, M. B. Prime and M. R. Hill, Experimental Mechanics 2015, vol. 55, pp. 577-585.10.1007/s11340-014-9971-2 ↗