Effect of Different Casting Parameters on the Cleanliness of High Manganese Steel Ingots Compared to High Carbon Steel
Source abstract
Abstract
The increasing demand for excellent steel properties has led to the creation of new steel grades such as high manganese TWIP and TRIP steels which are scientifically examined in Germany within the international research framework of the SFB 761 “Steel-ab initio.” The production of these high-technology products, utilizing mainly the ingot-casting method, leads to new challenges in the prevention of cast defects. At RWTH Aachen University, a systematic investigation of the solidification process as it relates to shrinkage cavity, macrosegregation, cleanliness, and surface imperfections in as-cast ingots is being conducted. A particular attention was devoted to the effects of such casting parameters as superheat, pouring rate, hot top, and stirring conditions on the solidification and cleanliness of low carbon alloyed and high manganese alloyed steels. The experimental results show that rising manganese content leads to a higher amount and larger size of inclusions while rising carbon content enhances the inclusion generation in the same way. It was found that a bottom teeming system combined with an inert gas atmosphere produces the best quality and that if casting is performed with a runner-system, it is important to use a SiO2-free refractory to avoid oxidizing the Mn content of the melt to MnO inclusions by redox-reactions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. A. Saeed-Akbari, J. Imlau, U. Prahl and W. Bleck, Metall. Mater. Trans. A, 2009, Vol. 40A, pp. 3076-90.10.1007/s11661-009-0050-8 ↗
2. W. Bleck, T. Labudde and S. Hoffmann, MP Materials Testing, 2010, Vol. 9 (52), pp. 572-77.10.3139/120.110163 ↗
3. Stahlinstitut VDEh und Wirtschaftsvereinigung Stahl: www.stahl-online.de, seen September 2011, http://www.stahl-online.de/Deutsch/Linke_Navigation/Stahl_in_Zahlen/_Dokumente/Stranggussanteil_Rohstahlerzeugung.pdf.
4. T. Sjökvist, M. Gornansson, P. Jönsson and P. Cowx, Ironmaking and Steelmaking, 2003, Vol. 30 (1), pp. 73-80.10.1179/030192303225009461 ↗
5. L. Ragnarsson and D. Sichen, Steel Res. Int., 2010, 81(1), pp. 40-48.10.1002/srin.200900064 ↗
6. J.H. Park D.-J. Kim and D.J. Min, Metall. Mater. Trans. A, 2012, Vol. 43A, pp. 2316-24.10.1007/s11661-012-1088-6 ↗
7. A. Grajcar, U. Galisz and L. Bulkowski, Arch. Mater. Sci. Eng., 2011, Vol 50, pp. 21-30.
8. L. Zhang, B. Rietow, B.G. Thomas and K. Eakin, ISIJ Int. 2006, Vol 46, No. 5, pp. 670-79.10.2355/isijinternational.46.670 ↗
9. H. Doostmohammadi, P.G. Jönsson, J. Komenda and S. Hagman, Steel Res. Int., 2010, Vol. 81, No. 2, pp. 142-49.10.1002/srin.200900106 ↗
10. P.K. Trojan: ASM Handbook, Casting, vol. 15, ASM International, Materials Park, OH, 1988, pp. 88–97.
11. T.J. Baker and J.A. Charles: Effect of Second-Phase Particles on the Mechanical Properties of Steel, M.J. May, ed., The Iron and Steel Institute, Scarborough, 1971, pp. 88–94.
12. L. Zhang and B.G. Thomas, Metall. Mater. Trans. B, 2006, Vol. 37, pp. 733-61.10.1007/s11663-006-0057-0 ↗
13. F.B. Pickering: International Conference on Production and Application of Clean Steels, The Iron and Steel Institute, Balatonfüred, Hungary, 1970, pp. 75–91.
14. A.D. Wilson: Advances in the Production and Use of Steel with Improved Internal Cleanliness, J.K. Mahaney, ed., ASTM, Philadelphia, PA, 1999, pp. 73–88.10.1520/STP12375S ↗
15. M. Byrne, T.W. Fenicle and A.W. Cramb, Ironmaking Steelmaking, 1988, Vol. 15 (6), pp. 41-50.
16. N.A. Zyuban and S.I. Zhul’ev: Metallurgist, 2000, vol. 44 (9–10), pp. 530–33.10.1023/A:1004861632548 ↗
17. R.D. O’Hara, A.G.R. Spence and J.D. Eisenwasser, Rev. Metall. CIT, 1987, Vol. 84 (2), pp. 147-234.10.1051/metal/198784020147 ↗
18. P.R. Scheller and R. Hagemann: Paper Presented at the First International Conference on High Manganese Steels, Seoul, 15 May 2011, Abstract, p. 123.
19. L. Zhang and B.G. Thomas, ISIJ Int., 2003, Vol. 43, No. 3, pp. 271-91.10.2355/isijinternational.43.271 ↗
20. H.C. Vacher and E.H. Hamilton, Trans. AIME, 1931, Vol. 95, pp. 124–40.