journal article·2015-09

The Influence of Prolonged Natural Aging on the Subsequent Artificial Aging Response of the AA6111 Automotive Alloy

Abdelhadi Abouarkoub, G. E. Thompson, X. Zhou, T. Hashimoto, G. Scamans

Publisher page

Abstract

The influence of prolonged ambient temperature storage on the subsequent precipitation behavior of the AA6111-T4P automotive alloy during artificial aging has been investigated using hardness testing and high-resolution transmission electron microscopy. The results indicate that growth of atomic co-clusters and GP zones during ambient storage suppress the onset of Q′ and Q precipitation, and retard the formation of elemental silicon particles. However, the overall hardening response of the stored AA6111 T4P alloy to subsequent peak-aging and over-aging treatments is not altered by the significant reduction in the volume fraction of Q′ and Q precipitates due to their lower strengthening effects compared with GP zones and the Q″ phase precipitates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. S. Esmaeili, X. Wang, D. Lloyd and W. Poole, Metallurgical and Materials Transactions A, 34A (2003), pp. 751-763.
2. M. Murayama and K. Hono, Acta Materialia, 47 (1999), pp. 1537-1548.10.1016/S1359-6454(99)00033-6 ↗
3. S. Esmaeili and D. Lloyd, Scripta Materialia, 50 (2004), pp. 155-158.10.1016/j.scriptamat.2003.08.030 ↗
4. S. Esmaeili, D. Lloyd and W. Poole, Acta Materialia, 51 (2003), pp. 3467-3481.10.1016/S1359-6454(03)00167-8 ↗
5. A. Serizawa, S. Hirosawa and T. Sato, Materials Science Forum, 519-521 (2006), pp. 245-250.10.4028/www.scientific.net/MSF.519-521.245 ↗
6. W. S. Miller, L. Zhuang, J. Bottema, A. J. Wittebrood, P. De Smet, A. Haszler and A. Vieregge, Materials Science and Engineering A280 (2000), pp. 37-49.10.1016/S0921-5093(99)00653-X ↗
7. J. Bryant, Metallurgical and Materials Transactions A, 30A (1999), pp. 1999-2006.10.1007/s11661-999-0010-3 ↗
8. W. Miao and D. Laughlin, J. Materials Science Letters, 19 (2000), pp. 201-203.10.1023/A:1006798305992 ↗
9. A. Perovic, D. Perovic, G. Weatherly and D. Lloyd, Scripta Materialia, 41 (1999), pp. 703-708.10.1016/S1359-6462(99)00204-3 ↗
10. X. Wang, W. Poole, S. Esmaeili, D. Lloyd and J. Embury, Metallurgical and Materials Transactions A, 34A (2003), pp. 2913-2924.10.1007/s11661-003-0191-0 ↗
11. R. Shahbazian Yassar: Ph.D. Thesis, Washington State University, 2005.
12. G. Weatherly, A. Perovic, N. Mukhopadhyay, D. Lloyd, and D. Perovic, Metallurgical and Materials Transactions A, 32A (2001), pp. 213-218.10.1007/s11661-001-0251-2 ↗
13. B. Raeisinia, W. Poole, X. Wang and D. Lloyd, Metallurgical and Materials Transactions, 37A (2006), pp. 1183-1190.10.1007/s11661-006-1069-8 ↗
14. M. Murayama, K. Hono, W. Miao, and D. Laughlin, Metallurgical and Materials Transactions A, 32A (2001), pp. 239-246.10.1007/s11661-001-0254-z ↗
15. W. Miao and D. Laughlin, Scripta Materialia, 40 (1999), pp. 873-878.10.1016/S1359-6462(99)00046-9 ↗
16. X. Wang, S. Esmaeili, and D. Lloyd, Metallurgical and Materials Transactions A, 37A (2006), pp. 2691-2699.10.1007/BF02586103 ↗
17. S. Taniguchi, K. Matsuda, T. Sato and S. Ikeno, Materials Forum, 28 (2004), pp. 742-745.
18. C. Marioara, S. Andersen, T. Stene, H. Hasting, J. Walmsley, A. Helvoort and R. Holmestad, Philosophical Magazine, 87 (2007), pp. 3385-3413.10.1080/14786430701287377 ↗
19. H. Hasting, J. Walmsley, A. Helvoort, C. Marioara, S. Andersen and R. Holmestad, Philosophical Magazine Letters, 86 (2006), pp. 589-597.10.1080/09500830600938340 ↗
20. W. Miao and D. Laughlin, Metallurgical and Materials Transactions A, 31A (2000), pp. 361-371.10.1007/s11661-000-0272-2 ↗
21. J. Friis, B. Holmedal, Ø. Ryen, E. Nes, O. Myhr, Ø. Grong, T. Furu and K. Marthinsen, Materials Science Forum, 519-521 (2006), pp. 1901-1906.10.4028/www.scientific.net/MSF.519-521.1901 ↗
22. G. Edwards, K. Stiller, G. Dunlop and M. Couper, Acta Metallurgica, 46 (1998), pp. 3893-3904.
23. C. D. Marioara, S. Andersen, J. Jansen and H. Zandbergen, Acta Materialia, 51 (2003), pp. 789-796.10.1016/S1359-6454(02)00470-6 ↗
24. J. Yao, D. Graham, B. Rinderer and M. Couper, Micron 32 (2001), pp. 865-870.10.1016/S0968-4328(00)00095-0 ↗
25. J. Buha: Ph.D. Thesis, University of New South Wales, 2005.
26. M. Tanaka and T. Warner, Rev. Met. Paris, 5 (2003), pp. 463-46910.1051/metal:2003216 ↗
27. M. Torsæter, W. Lefebvre, C. D. Marioara, S. J. Andersen, J. C. Walmsley and R. Holmestad, Scripta Materialia, 64 (2011) 817-820.10.1016/j.scriptamat.2011.01.008 ↗
28. C. Cayron, L. Sagalowicz, O. Beffort and P. Buffat, Philosophical Magazine, 79A (1999), pp. 2833-2851.10.1080/01418619908212027 ↗
29. M. Kumar, C. Poletti, C. Collet, and H. Degischer: Proceedings of the 12th international conference on aluminium alloys, Yokohama. 2010, pp. 1009–14.
30. L. Hong, Z. Gang, L. Chun-ming and Z. Liang, Trans. Nonferrous Met. Soc. China, 16 (2006), pp. 376-381.10.1016/S1003-6326(06)60064-2 ↗
31. W. Poole, D. Lloyd and J. Embury, Materials Science and Engineering, A234-236 (1997), pp. 306-309.10.1016/S0921-5093(97)00192-5 ↗
32. R. Gao, K. Stiller and A. Oskarsson, Materials Forum, 28 (2004), pp. 545-551.
33. S. Li, R. Marceau, G. Sha, W. Poole, and S. Ringer: Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama. 2010, pp. 2213–18.
34. S. Hirth, G. Marshall, S. Court and D. Lloyd, Materials Science and Engineering, A319-321 (2001), pp. 452-456.10.1016/S0921-5093(01)00969-8 ↗
35. L. Cao, P. Rometsch, H. Zhong, Y. Mulji, S. Gao, and B. Muddle: Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, 2010, pp. 395–400.
36. G. Quainoo and S. Yannacopoulos, Ghana J. Sci., 47 (2007), pp. 91-100.
37. T. Honma, K. Matsumoto, Y. Nagai, M. Hasegawa, and K. Hon, Materials Forum, 28 (2004), pp. 494-500.
38. C. Marioara, S. Andersen, H. Zandbergen and R. Holmestad, Metallurgical and Materials Transactions, 36A (2005), pp. 691-702.
39. A. Cuniberti, A. Tolley, M. Riglos and R. Giovachini (2010) Mater. Sci. Eng. A 527, pp. 5307-5311.10.1016/j.msea.2010.05.003 ↗
40. P. Rometsch, L. Cao, and B. Muddle: Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, 2010, pp. 389–94.
41. T. Moons, P. Ratchev, P. Smet, B. Verlindern and P. Houtte, Scripta Materialia, 35 (1996), pp. 939-945.10.1016/1359-6462(96)00244-8 ↗
42. M. Murayama, K. Hono, M. Saga and M. Kikuchi, Materials Science and Engineering, A250 (1998), pp. 127-132.10.1016/S0921-5093(98)00548-6 ↗
43. S. Ceresara, E. Dirusso, P. Fiorini, and A. Giarda: Mater. Sci. Eng., 1969/70, vol. 5, pp. 220–27.10.1016/0025-5416(70)90084-4 ↗
44. M. Murayama, K. Hono, M. Saga, and M. Kikuchi: Nippon Steel Corporation, steel research laboratories, http://www.nims.go.jp/apfim/apfim/project/AlMgSi.html.
45. K. Takata, J. Takahashi, M. Saga, K. Ushioda, K. Ikeda, M. Mitsuhara, K. Terada, S. Hata, H. Nakashima, K. Kaneko, and M. Ki: Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, 2010, pp. 1179–83.
46. S. Yuan, G. Liu, R. Wang, G. Zhang, X. Pu, J. Sun, and K. Chen: Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, 2010, pp. 1117–23.
47. L. Hong, Z. Gang, L. Chun-ming and Z. Liang, Trans. Nonferrous Met. Soc. China 17(2007), pp. 122-127.10.1016/S1003-6326(07)60059-4 ↗
48. H. Zandbergen, S. Andersen and J. Jansen, Science, 277 (1997), pp. 1221-1225.10.1126/science.277.5330.1221 ↗
49. S. Andersen, H. Zandbergen, J. Jansen, C. Tráholt, U. Tundal, and O. Reiso, Acta Materialia, 46 (1998), pp. 3283-3298.10.1016/S1359-6454(97)00493-X ↗
50. D. Chakrabarti, Y. Peng and D. Laughlin, Materials Science Forum, 396-402 (2002), pp.857-862.10.4028/www.scientific.net/MSF.396-402.857 ↗
51. K. Matsuda, Y. Uetani, T. Sato, and S. Ikeno, Metallurgical and Materials Transactions A, 32A (2001), pp. 1293-1299.10.1007/s11661-001-0219-2 ↗
52. J. Kim, E. Kobayashi, and T. Sato: Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, 2010, pp. 1051–56.
53. M. Ando and Y. Suzuki: Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, 2010, pp. 1045–50.
54. C. Shen and B. Ou, J. Chinese Institute of Engineers, 31 (2008), pp. 181-187.10.1080/02533839.2008.9671372 ↗
55. G.M. Dmytrowich: M.Sc. Thesis, University of Saskatchewan, Saskatoon, 2009.
56. C. Ravi and C. Wolverton, Acta Materialia 52 (2004), pp. 4213-4227.10.1016/j.actamat.2004.05.037 ↗
57. M. Murayama and K. Hono: National Research Institute for Metals, Tsukuba.
58. J. Yan-li, G. Fu-an, and P. Yan-feng, Trans. Nonferrous Met. Soc. China, 18 (2008) 126-131.10.1016/S1003-6326(08)60023-0 ↗
59. A. Gaber, A. Ali, K. Matsuda, T. Kawabata, T. Yamazaki and S. Ikeno, J. Alloys and Compounds, 432 (2007), pp. 149-155.10.1016/j.jallcom.2006.06.004 ↗
60. C. Marioara, S. Andersen, C. Boothroyd, and R. Holmestad: Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, 2010, pp. 424–29.
61. R. Holmestad, C. Marioara, F. H. Ehlers, M. Torsæter, R. Bjørge, J. Røyset, and S. J. Andersen: Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, 2010, pp. 30–39.