A study of twinning in zirconium using neutron diffraction and polycrystalline modeling
Source abstract
Abstract
An experimental study using neutron diffraction quantified the evolution of twinning in pure clock-rolled zirconium that was subsequently deformed under uniaxial compression. The clock rolling introduced an initial texture of approximately 5 times random, and the compression specimens were cut with their loading axes nearly parallel to the predominant c-axes direction. Seven specimens deformed to strains between −2 and −17 pct and an undeformed specimen (0 pct strain) were examined. The deformation was performed at an applied strain rate of 0.001/s at 77 K. Twin volume fractions were estimated from diffraction data. Changes in texture and twin volume fractions were compared to predictions from a visco-plastic self-consistent (VPSC) polycrystal model, which described both slip and twinning. This work demonstrates the feasibility of using neutron diffraction to track the evolution of twinning. These results help benchmark the polycrystalline model, validate the description of twinning, and potentially lead to a better understanding of its role in hardening.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Advanced materials and composites · X-ray Diffraction in Crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. R.E. Reed-Hill: in Deformation Twinning, R.E. Reed-Hill, J.P. Hirth, and H.C. Rogers, eds., TMS, Warrendale, PA, vol. 25, 1964, p. 295.
2. P.G. Partridge: Metall. Rev, 1967, vol. 12, p. 169.10.1179/imr.1967.12.1.169 ↗
3. E. Tenckhoff: Deformation Mechanisms, Texture, and Anisotropy in Zirconium and Zircaloy, ASTM, Philadelphia, PA, 1988, p. 3.
4. S.G. Song and G.T. Gray III. Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2665–76.10.1007/BF02669423 ↗
5. G.C. Kaschner, G.T. Gray III, and S.R. Chen: Proc. Topical Conf. on “Shock Compression of Condensed Matter.” S.C. Schmidt, D.P. Dandekar, and J.W. Forbes, eds., AIP, Amherst, MA, 1997, pp. 435–38.
6. G.C. Kaschner and G.T. Gray III: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1997–2003.10.1007/s11661-000-0227-7 ↗
7. C.N. Tome, P.J. Maudlin, R.A. Lebensohn, and G.C. Kaschner: Acta Mater., 2001, vol. 49 (15), pp. 3085–96.10.1016/S1359-6454(01)00190-2 ↗
8. G.C. Kascher, J.F. Bingert, C. Liu, M.L. Lovato, P.J. Maudlin, M.G. Stout, and C.N. Tome: Acta Mater., 2001, vol. 49 (15), pp. 3097–3108.10.1016/S1359-6454(01)00191-4 ↗
9. J.S. Kallend, U.F. Kocks, A.D. Rollett, and H.R. Wenk: Text. Microstr., 1991, vol. 14 (5), pp. 1203–08.10.1155/TSM.14-18.1203 ↗
10. S. Matthies and G.W. Vinel: Phys. Status Solid B—Basic Res., 1982, vol. 112 (2), pp. K111-K114.10.1002/pssb.2221120254 ↗
11. Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties, U.F. Kocks, C.N. Tome, and H.R. Wenk, eds., Cambridge University Press, Cambridge, NY, 1998, pp. 115–16.
12. M.A.M. Bourke, J.A. Goldstone, and T.M. Holden: Measurement of Residual and Applied Stress Using Neutron Diffraction, M.T. Hutchings and A.D. Krawitz, eds., Kluwer Academic Publishers. Dordrecht, The Netherlands, 1992, pp. 369–82.10.1007/978-94-011-2797-4_29 ↗
13. R.B. Von Dreele, J.D. Jorgensen, and C.-G. Windsor: J. Appl. Cryst., 1982, vol. 15, p. 581.10.1107/S0021889882012722 ↗
14. L.B. McCusker, R.B. Vondreele, D.E. Cox, D. Louer, and P. Scardi: J. Appl. Cryst., 1999, vol. 32, pp. 36–50.10.1107/S0021889898009856 ↗
15. H.M. Rietveld: J. Appl. Cryst., 1969, vol. 2, p. 65.10.1107/S0021889869006558 ↗
16. A.C. Lawson and R.B. Von Dreele: Report No. LAUR 86-748, Los Alamos National Laboratory, Los Alamos, NM, 1966.
17. T.A. Mason, J.F. Bingert, and G.C. Kaschner: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 949–54.