Influence of Nb-Microalloying on the Formation of Nano/Ultrafine-Grained Microstructure and Mechanical Properties During Martensite Reversion Process in a 201-Type Austenitic Stainless Steel
Source abstract
Abstract
In this study, influence of Nb-microalloying on formation of nano/ultrafined grain microstructure and mechanical properties during martensite reversion process in a 201-type austenitic stainless steel microalloyed with Nb was investigated. For this purpose, the 90 pct cold-rolled samples with almost fully martensitic microstructure were reversion annealed at 1023 K to 1173 K (750 °C to 900 °C) for 5 to 1800 seconds. The microstructural evolution was characterized using X-ray diffractometer, Ferritescope, optical microscope, scanning, and transmission electron microscopes. Mechanical properties were evaluated using hardness and tensile tests. The reversion mechanism was found to be diffusion controlled. In comparison with other types of 201 steel, the kinetics of grain growth at 1173 K (900 °C) was much slower in the Nb-bearing steel, being related to the rapid precipitation of nano-sized Nb-rich carbonitrides during reversion process. At this temperature, the finest austenitic microstructure was achieved in the specimen reversion annealed for 60 seconds, possessing a microstructure composed of nano and ultrafined grains with an average grain size of 93 nm. This specimen exhibited an excellent combination of ultrahigh strength (yield strength of 1 GPa and tensile strength of 1.5 GPa) and good ductility (tensile elongation of 35 pct).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. L.P. Karjalainen, T. Taulavuori, M. Sellman, A. Kyrolainen: Steel. Res. Int., 2008, vol. 79, pp. 404-412.10.1002/srin.200806146 ↗
2. E. Ma: Scripta Mater., 2003, vol. 49, pp. 663-68.10.1016/S1359-6462(03)00396-8 ↗
3. D.L. Johannsen, A. Kyrolainen and P.J. Ferriera: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2325-38.10.1007/BF02586207 ↗
4. M.C. Somani, P. Juntunen, L.P. Karjalainen, R.D.K. Misra, and A. Kyrolainen: Metall. Mater. Trans. A, 2009, vol. 40A, 729-44.10.1007/s11661-008-9723-y ↗
5. R.D.K. Misra, S. Nayak, P.K.C. Venkatasurya, V. Ramuni, M.C. Somani and L.P. Karjalainen: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2162-74.10.1007/s11661-010-0230-6 ↗
6. R.D.K. Misra, Z. Zhang, P.K.C. Venkatasurya, M.C. Somani and L.P. Karjalainen: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7779-92.10.1016/j.msea.2010.08.051 ↗
7. P. Behjati, A. Kermanpur and A. Najafizadeh: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3524-31.10.1007/s11661-013-1698-7 ↗
8. P. Behjati, A. Kermanpur, A. Najafizadeh and H. Samaei Baghbadorani: Mater. Sci. Eng. A, 2014, vol. 592, pp. 77-82.10.1016/j.msea.2013.10.087 ↗
9. M. Eskandari, A. Kermanpur and A. Najafizadeh: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2241-49.10.1007/s11661-009-9916-z ↗
10. S. Rajasekhara, L.P. Karjalainen, A. Kyrolainen and P.J. Ferreira: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1986-96.10.1016/j.msea.2009.11.037 ↗
11. A. Di Schino, J. Kenny: Mater. Sci. Lett. 2002, vol. 2l, pp. 1631–34.10.1023/A:1020338103964 ↗
12. R. Kumar, B. Das, K. Swapan, B. Mahato and R. N. Ghosh: J. Mater. Sci., 2010, vol. 45, pp. 911-18.10.1007/s10853-009-4020-8 ↗
13. M. Eskandari, A. Najafizadeh and A. Kermanpur: Mater. Sci. Eng. A, 2009, vol. 519, pp. 46-50.10.1016/j.msea.2009.04.038 ↗
14. A. Kisko, A. Hamada, L.P. Karjalainen and J. Talonen: Microstructure and Mechanical Properties of Reversion Treated High Mn Austenitic 204Cu and 201 Stainless Steels, HMnS 2011, Paper B-19, Grand Hilton Hotel, Seoul, May 15–18, 2011.
15. M. Moallemi, A. Najafizadeh, A. Kermanpur and A. Rezaee: Mater. Sci. Eng. A, 2011, vol. 530, pp. 378-81.10.1016/j.msea.2011.09.099 ↗
16. A. Rezaee, A. Kermanpur, A. Najafizadeh and M. Moallemi: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5025-29.10.1016/j.msea.2011.02.093 ↗
17. A. Kisko, R.D.K. Misra, J. Talonen and L.P. Karjalainen: Mater. Sci. Eng. A, 2013, vol. 578, pp. 408-16.10.1016/j.msea.2013.04.107 ↗
18. S.H. Cho, Κ.Β. Kang and J.J. Jonas: ISIJ Int., 2001, vol. 41, pp. 63-69.10.2355/isijinternational.41.63 ↗
19. G.R. Stewart, J.J. Jonas and F. Montheillet: ISIJ Int., 2004, vol. 44, pp. 1581-89.10.2355/isijinternational.44.1581 ↗
20. M. Shaban and B. Eghbali: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4320-25.10.1016/j.msea.2010.03.086 ↗
21. S. Sadeghpour, A. Kermanpur and A. Najafizadeh: Mater. Sci. Eng. A, 2013, vol. 584, pp. 177-83.10.1016/j.msea.2013.07.014 ↗
22. I. Tamura, H. Sekine, T. Tancaka and C. Ouchi. Thermomechanical Processing of High-Strength Low-Alloy Steels, London, Butterworth and Co Ltd., 1988.
23. Y.K. Lee, J.E. Jin and Y.Q. Ma: Scripta Mater., 2007, vol. 57, pp. 707-10.10.1016/j.scriptamat.2007.06.047 ↗
24. L.G. Martinez, K. Imakuma and A.F. Padilha: Steel Res., 1992; vol. 63, pp. 221-23.10.1002/srin.199200503 ↗
25. A. Rezaee, A. Kermanpur, A. Najafizadeh, M. Moallemi and H. Samaei Baghbadorani: Mater. Des. 2013, vol. 46, pp. 49-53.10.1016/j.matdes.2012.09.054 ↗
26. R.D.K. Misra, S. Nayak, S.A. Mali, J.S. Shah, M.C. Somani and L.P. Karjalainen: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3-12.10.1007/s11661-009-0072-2 ↗
27. K. Tomimura, S. Takaki, S. Tanimoto and Y. Tokunaga: ISIJ Int., 1991, vol. 31, pp. 721-27.10.2355/isijinternational.31.721 ↗
28. K. Tomimura, S. Takaki and Y. Tokunaga: ISIJ Int., 1991, vol. 31, pp. 1431-37.10.2355/isijinternational.31.1431 ↗
29. J.C. Herman, B. Donnay, and V. Leroy: ISIJ Int., 1992, vol. 32, pp. 779-85.10.2355/isijinternational.32.779 ↗
30. J.S. Park, Y.S. Ha, S.J. Lee and Y.K. Lee: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 560-68.10.1007/s11661-008-9758-0 ↗
31. R.D.K. Misra, H. Zheng, K.M. Wu and L.P. Karjalainen: Mater. Sci. Eng. A, 2013, vol. 579, pp. 188-93.10.1016/j.msea.2013.05.043 ↗
32. G.H. Eichelmann and F.C. Hull: Trans. Am. Soc. Met., 1953, vol. 45, pp. 77-104.
33. A. Rezaee, A. Kermanpur, A. Najafizadeh and M. Moallemi: Mater. Des., 2011, vol. 32, 4437-42.10.1016/j.matdes.2011.03.065 ↗
34. M. Moallemi: M.Sc. Thesis, Isfahan University of Technology, 2011.
35. D.J. Dyson and B. Holmes: J. Iron Steel Res. Int., 1970, vol. 208, pp. 469-74.
36. G.E. Dieter, Mechanical Metallurgy, 3rd ed., McGraw-Hill, New York, 1976.
37. G.K. Allan: Ironmak. Steelmak., 1995, vol.22, pp. 465-77.
38. S. Venugopal, C. Ravishankar, S.L. Mannan and Y.V.R.K. Prasad: Scripta Metall. Mater., 1994, vol. 30, pp. 1611-16.10.1016/0956-716X(94)90317-4 ↗
39. L. Kaufman, E.V. Clougherty and R.J. Weiss: Acta Metall., 1963, vol. 11, pp. 323-35.10.1016/0001-6160(63)90157-3 ↗