On the Effect of Environmental Exposure on Dwell Fatigue Performance of a Fine-Grained Nickel-Based Superalloy
Source abstract
Abstract
Abstract The influence of sulfur contamination on the corrosion-fatigue behavior of a polycrystalline superalloy used in aero-engines is considered. Samples tested under a variety of environmental conditions (including exposures to air, SOxgas, and salt) are characterized through a suite of high-resolution characterization methods, including transmission electron microscopy (TEM), secondary ion mass spectroscopy (nanoSIMS), and atom probe tomography (APT). The primary effect of sulfur contamination is to accelerate the crack growth rate by altering the failure mechanism. The SIMS and TEM analyses indicate Cr-Ti sulfide particle formation at grain boundaries ahead of and around oxidized cracks. The APT analysis suggests that these particles then oxidize as the crack propagates and are enveloped in chromia. The chromia is surrounded by a continuous layer of alumina within the cracks. All of the sulfur detected was confined within the particles, with no elemental segregation found at grain boundaries.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. K. Chen, L.R. Zhao, and J.S. Tse: Acta Mater., 2003, vol. 51(4), pp. 1079–86.10.1016/S1359-6454(02)00512-8 ↗
2. S. Floreen and R.H. Kane: Metall. Trans. A, 1979, vol. 10A, pp. 1745–51.10.1007/BF02811710 ↗
3. J.J. Moverare, G. Leijon, H. Brodin, and F. Palmert: Mater. Sci. Eng. A, 2013, vol. 564, pp. 107–15.10.1016/j.msea.2012.11.079 ↗
4. R.A. Rapp: Corros. Sci., 2002, vol. 44(2), pp. 209–21.10.1016/S0010-938X(01)00057-9 ↗
5. D.J. Child, J. Meldrum, and P. Onwuarolu: Mater. Sci. Technol. (United Kingdom), 2017, vol. 33(9), pp. 1040–47.10.1080/02670836.2016.1242827 ↗
6. H.L. Cockings, K.M. Perkins, and M. Dowd: Mater. Sci. Technol. (United Kingdom), 2017, vol. 33(9), pp. 1048–55.10.1080/02670836.2017.1300419 ↗
7. A. Encinas-Oropesa, N.J. Simms, J.R. Nicholls, G.L. Drew, J. Leggett, and M.C. Hardy: Mater. High Temp., 2009, vol. 26(3), pp. 241–49.10.3184/096034009X465202 ↗
8. Y.-R. Zheng, Y.-L. Cai, Z.-C. Ruan, and S.-W. Ma: J. Aeronaut. Mater., 2006, vol. 26(3), 25–34.
9. 9.C.L. White, J.H. Schneibel, and R.A. Padgett: Metall. Trans. A, 1983, vol. 14, pp. 595–610.10.1007/BF02643776 ↗
10. P.A.J. Bagot, O.B.W. Silk, J.O. Douglas, S. Pedrazzini, D.J. Crudden, T.L. Martin, M.C. Hardy, M.P. Moody, and R.C. Reed: Acta Mater., 2017, vol. 125, pp. 156–65.10.1016/j.actamat.2016.11.053 ↗
11. P. Kontis, H.A.M. Yusof, S. Pedrazzini, M. Danaie, K.L. Moore, P.A.J. Bagot, M.P. Moody, C.R.M. Grovenor, and R.C. Reed: Acta Mater., 2016, vol. 103, pp. 688–99.10.1016/j.actamat.2015.10.006 ↗
12. P. Kontis, A. Alabort, D. Barba, D.M. Collins, A.J. Wilkinson, and R.C. Reed: Acta Mater., 2017, vol. 124, pp. 498–500.10.1016/j.actamat.2016.11.009 ↗
13. H.Y. Li, J.F. Sun, M.C. Hardy, H.E. Evans, S.J. Williams, T.J.A. Doel, and P. Bowen: Acta Mater., 2015, vol. 90, pp. 355–69.10.1016/j.actamat.2015.02.023 ↗
14. S. Pedrazzini, D.J. Child, G. West, S.S. Doak, M.C. Hardy, M.P. Moody, and P.A.J. Bagot: Scripta Mater., 2016, vol. 113, pp. 51–54.10.1016/j.scriptamat.2015.10.001 ↗
15. H.S. Kitaguchi, M.P. Moody, H.Y. Li, H.E. Evans, M.C. Hardy, and S. Lozano-Perez: Scripta Mater., 2015, vol. 97, pp. 41–44.10.1016/j.scriptamat.2014.10.025 ↗
16. S. Cruchley, M.P. Taylor, H.E. Evans, M.C. Hardy, and D.J. Child: Mater. Sci. Technol. (United Kingdom), 2014, vol. 30(15), pp. 1884–89.10.1179/1743284714Y.0000000541 ↗
17. M.P. Taylor, H.E. Evans, S. Stekovic, and M.C. Hardy: Mater. High Temp., 2012, vol. 29(2), pp. 465–75.10.3184/096034012X13341417107382 ↗
18. A. Encinas-Oropesa, G.L. Drew, M.C. Hardy, A.J. Leggett, J.R. Nicholls, and N.J. Simms: Proc. Int. Symp. on Superalloys, 2008.
19. S. Cruchley, H.E. Evans, M.P. Taylor, M.C. Hardy, and S. Stekovic: Corros. Sci., 2013, vol. 75, pp. 242–52.10.1016/j.corsci.2013.05.016 ↗
20. S. Mrowec: Oxid. Met., 1995, vol. 44(1), pp. 177–209.10.1007/BF01046727 ↗
21. S. Pahlavanyali, H.T. Pang, F. Li, S. Bagnall, and C. Rae: Mater. Sci. Technol. (United Kingdom), 2014, vol. 30(15).10.1179/1743284714Y.0000000649 ↗
22. Y. Chen, R.C. Reed, and E.A. Marquis: Scripta Mater., 2012, vol. 67(9), pp. 779–82.10.1016/j.scriptamat.2012.06.023 ↗
23. D. Deb, S. Ramakrishna Iyer, and V.M. Radhakrishnan: Mater. Lett., 1996, vol. 29(1–3), pp. 19–23.10.1016/S0167-577X(96)00109-7 ↗
24. Y. Murata, R. Hashizume, A. Yoshinari, N. Aoki, M. Morinaga, and Y. Fukui: Proc. Int. Symp. Superalloys, 2000, pp. 285–94.10.7449/2000/Superalloys_2000_285_294 ↗
25. R. Bürgel, J. Grossmann, O. Lüsebrink, H. Mughrabi, F. Pyczak, R.F.F. Singer, A. Volek, R. Burgel, J. Grossmann, O. Lusebrink, H. Mughrabi, F. Pyczak, R.F.F. Singer, and A. Volek: Proc. Int. Symp. Superalloys, 2004, vol. 200, p. 25.10.7449/2004/Superalloys_2004_25_34 ↗
26. J.X. Chang, D. Wang, T. Liu, G. Zhang, L.H. Lou, and J. Zhang: Corros. Sci., 2015, vol. 98, pp. 585–91.10.1016/j.corsci.2015.05.066 ↗
27. D.J. Young: Elsevier Corros. Ser., 2008, vol. 1, p. 242.
28. D.A. Woodford: Energy Mater. Mater. Sci. Eng. Energy Syst., 2006, vol. 1(1), pp. 59–79.10.1179/174892306X99679 ↗
29. R.H. Bricknell, R.A. Mulford, and D.A. Woodford: Metall. Trans. A, 1982, vol. 13A, pp. 1223–32.10.1007/BF02645505 ↗
30. S. Mrowec: Oxid. Met., 1995, vol. 44(1), pp. 177–209.10.1007/BF01046727 ↗
31. J.X. Chang, D. Wang, T. Liu, G. Zhang, L.H. Lou, and J. Zhang: Corros. Sci., 2015, vol. 98, pp. 585–91.10.1016/j.corsci.2015.05.066 ↗
32. S.R. Shatynski: Oxid. Met., 1977, vol. 11(6), pp. 307–20.10.1007/BF00608014 ↗