Effect of LiF as Sintering Agent on the Densification and Phase Formation in Al2O3-4 Wt Pct Nb2O5 Ceramic Compound
Source abstract
Abstract
Different amounts of LiF were added to an Al2O3-4 pct Nb2O5 basic ceramic, as sintering agent. Improved new ceramics were obtained with LiF concentrations varying from 0.25 to 1.50 wt pct and three sintering temperatures of 1573 K, 1623 K, and 1673 K (1300 °C, 1350 °C, and 1400 °C). The addition of 0.5 wt pct LiF yielded the highest densification, 94 pct of the theoretical density, in association with a sintering temperature of 1673 K (1400 °C). Based on X-ray diffraction (XRD), this improvement was due not only to the presence of transformed phases, more precisely Nb3O7F, but also to the absence of LiAl5O8. The preferential interaction of LiF with Nb2O5, instead of Al2O3, contributed to increase the alumina sintering ability by liquid phase formation. Scanning electron microscopy (SEM) results revealed well-connected grains and isolated pores, whereas the chemical composition analysis by energy dispersive energy (EDX) indicated a preferential interaction of fluorine with niobium, in agreement with the results of XRD. It was also observed from thermal analysis that the polyethylene glycol binder burnout temperature increased for all LiF concentrations. This may be related to the formation of hydrogen bridge bonds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Y.F. Hsu, S.F. Wang, Y.R. Wang, and S.C. Chen: Ceram. Int., 2008, vol. 34, pp. 1183-1187.10.1016/j.ceramint.2007.02.010 ↗
2. N. Louet, M. Gonon, and G. Fantozzi: Ceram. Int., 2005, vol. 31, pp. 981-987.10.1016/j.ceramint.2004.10.013 ↗
3. F.G.E. Nogueira, Y.J.O. Asencios, C.B. Rodella, A.L.M. Porto, and E.M. Assaf: Mater. Chem. Phys., 2016, vol. 184, pp. 23-30.10.1016/j.matchemphys.2016.08.032 ↗
4. L.N.L. Oliveira, R.V.B. Campos, D.X. Gouveia, M.A.S. Silva, and A.S.B. Sombra: Microw. Opt. Technol. Lett., 2016, vol. 58, pp.1473-1479.10.1002/mop.29816 ↗
5. A.S. Rocha, A.M.S. Forrester, E.R. Lachter, and E.F.S. Sousa-Aguiar: Catal. Today, 2012, vol. 192, pp. 104-111.10.1016/j.cattod.2012.02.062 ↗
6. J.H. Jang, T.Y. Kim, N.J. Kim, C.H. Lee, E.M. Park, C. Park, and S.J. Suh: Mater. Sci. Eng. B, 2011, vol. 176, pp. 1505-1508.10.1016/j.mseb.2011.07.021 ↗
7. A. Uhl, J. Sainio, J. Lahtinen, S. Shaikhutdinov, and H.-J. Freund: Surf. Sci., 2007, vol. 601, pp. 5605-5610.10.1016/j.susc.2007.09.035 ↗
8. M.A. Abdel-Rehim, A.C.B. dos Santos, V.L.L. Camorim, and A.C. Faro Jr.: Appl. Catal. A, 2006, vol. 305, pp. 211-218.10.1016/j.apcata.2006.03.023 ↗
9. A.V. Gomes: Ballistic behavior of alumina with niobia and variation of target geometry (in Portuguese). DSc Dissertation, Military Institute of Engineering, Rio de Janeiro, Brazil, 2004.
10. C.L.T. Silva, V.L.L. Camorim, J.L. Zotin, M.L.R.D. Pereira, and A.C. Faro Jr.: Catal. Today, 2000, vol. 57, pp. 209-17.10.1016/S0920-5861(99)00328-4 ↗
11. S.N. Monteiro, V.S. Candido, F.O. Braga, L.T. Bolzan, R.P. Weber and J.W. Drelich: Eur. Polym. J., 2016, vol. 78, pp. 173-185.10.1016/j.eurpolymj.2016.03.031 ↗
12. S.N. Monteiro, T.L. Milanezi, L.H.L. Louro, E.P. Lima Jr., F.O. Braga, A.V. Gomes and J.W. Drelich: Mater. Des., 2016, vol. 96, pp. 263-269.10.1016/j.matdes.2016.02.024 ↗
13. S.N. Monteiro, L.H.L. Louro, A.V. Gomes, C.F.M. Chagas, A.B. Caldeira and E.P. Lima Jr.: Ceram. Int., 2016, vol. 42, pp. 7844-7847.10.1016/j.ceramint.2015.12.147 ↗
14. F.S. da Luz, E.P. Lima Jr., L.H.L. Louro and S.N. Monteiro: Mater. Res., 2015, vol. 18, pp. 170-177.10.1590/1516-1439.358914 ↗
15. R.B. da Cruz, E.P. Lima Jr., S.N. Monteiro and L.H.L. Louro, Mater. Res., 2015, vol. 18, pp. 70-75.10.1590/1516-1439.347514 ↗
16. S.N. Monteiro, L.H.L. Louro, W. Trindade, C.N. Elias, C.L. Ferreira, E.S. Lima, R.P. Weber, J.M. Suarez, A.B.S. Figueiredo, W.A. Pinheiro, L.C. da Silva and E.P. Lima Jr.: Metal. Mater. Trans. A, 2015, vol. 46A, pp. 4567-4577.10.1007/s11661-015-3032-z ↗
17. L.A. Rohen, F.M. Margem, S.N. Monteiro, C.M.F. Vieira, B.M. Araujo and E.S. Lima: Mater. Res., 2015, vol. 18, pp. 55-62.10.1590/1516-1439.346314 ↗
18. S.N. Monteiro, E.P. Lima Jr., L.H.L. Louro, L.C. Silva and J.W. Drelich: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 37–40.10.1007/s11661-014-2678-2 ↗
19. K. Waetzig and T. Hutzler: J. Eur. Ceram. Soc., 2017, vol. 37, pp. 2259-2263.10.1016/j.jeurceramsoc.2017.01.010 ↗
20. S.K. Mohan and R. Sarkar: Ceram. Int., 2016, vol. 42, pp. 13932-13943.10.1016/j.ceramint.2016.05.206 ↗
21. A. Goldstein, J. Raethel, M. Katz, M. Berlin and E. Galum: J. Eur. Ceram. Soc., 2016, vol. 36, pp. 1731-1742.10.1016/j.jeurceramsoc.2016.02.001 ↗
22. M.R. du Merac, I.E. Reimanis and H.-J. Kleebe: J. Am. Ceram. Soc., 2015, vol. 98, pp. 2130-2138.10.1111/jace.13596 ↗
23. L. Sposito, A. Piancastelli, P. Miceli and S. Martelli: J. Eur. Ceram. Soc., 2015, vol. 35, pp. 651-661.10.1016/j.jeurceramsoc.2014.09.005 ↗
24. A. Rothman, S. Kalabuklov, N. Sverlov, M.P. Dariel and N. Frage: Int. J. Appl. Ceram. Technol., 2014, vol. 11, pp. 146–153.10.1111/j.1744-7402.2012.02849.x ↗
25. A.C. Sutorik, C. Cooper and G. Gilde: J. Am. Ceram. Soc., 2013, vol. 96, pp. 3704-3707.10.1111/jace.12636 ↗
26. L. Sposito, A. Piancastelli and S. Martelli: J. Eur. Ceram. Soc., 2013, vol. 33, pp. 737-747.10.1016/j.jeurceramsoc.2012.10.013 ↗
27. A.C. Sutorik, G. Gilde, C. Cooper, J. Wright and C. Hilton: J. Am. Ceram. Soc., 2012, vol. 95, pp. 1807-1810.10.1111/j.1551-2916.2012.05217.x ↗
28. A.C. Sutorik, G. Gilde, J.J. Swab, C. Cooper, R. Gamble and E. Shanholtz: J. Am. Ceram. Soc., 2012, vol. 95, pp. 636-643.10.1111/j.1551-2916.2011.04798.x ↗
29. I. Reimanis and H.-J. Kleebe: J. Am. Ceram. Soc., 2009, vol. 92, pp. 1472-1480.10.1111/j.1551-2916.2009.03108.x ↗
30. W. Trindade, C.F.M. Chagas, A.V. Gomes, and L.H.L. Louro: Mater. Sci. Forum, 2014, vol. 788-789, pp. 653-658.10.4028/www.scientific.net/MSF.798-799.653 ↗
31. M. Aoyama, Y. Amano, K. Inoue, S. Honda, S. Hashimoto and Y. Iwamoto: J. Lumin., 2013, vol. 135, pp. 211 – 215.10.1016/j.jlumin.2012.10.014 ↗
32. T.R.N. Kutty and M. Nayak: J. Alloys Compd., 1998, vol. 269, pp. 473-479.10.1016/S0925-8388(98)00159-5 ↗
33. S.T. Sabitu and A.J. Goudy: J. Phys. Chem. C, 2012, vol. 116, pp. 13545-50.10.1021/jp302632w ↗
34. M. W. Barsoum: Fundamentals of Ceramics, 2nd ed., Institute of Physics, IOP Publishing 2003, pp. 88-93.10.1887/0750309024 ↗
35. K. Sugiyama, M. Saito and Y. Waseda: J. Cryst. Growth, 2009, vol. 311, pp. 966-969.10.1016/j.jcrysgro.2008.09.117 ↗
36. M. Liu, D. Xue and C Luo: J. Alloys Compd., 2006, vol. 426, pp. 118-122.10.1016/j.jallcom.2006.02.019 ↗