Investigation of the Effect of Magnesium on the Microstructure and Mechanical Properties of NiTi Shape Memory Alloy Prepared by Self-Propagating High-Temperature Synthesis
Source abstract
Abstract
This work aims to describe the effect of magnesium on the microstructure, phase composition, amount of undesirable Ti2Ni phase, martensitic transformation, mechanical properties, and corrosion resistance of NiTi alloy. To minimize the quantity of Ti2Ni phase, we use the magnesium as an element with high affinity to oxygen, because this phase is stabilized by oxygen. Various quantities of magnesium (1, 3, and 5 wt pct) were tested. Self-propagating high-temperature synthesis (SHS) was used as a production method of the alloys. The samples prepared by SHS were pulverized by a vibrating mill, and the obtained powders were used for consolidation by means of spark plasma sintering. Results showed a significant reduction of the content of undesirable Ti2Ni phase by the addition of magnesium. Further, magnesium increased corrosion resistance and yield strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. K. Otsuka and X. Ren: Progr. Mater. Sci., 2005, vol. 50, pp. 511–678.10.1016/j.pmatsci.2004.10.001 ↗
2. S. Nemat-Nasser and J.Y. Choi: Acta Mater., 2005, vol. 53, pp. 449–54.10.1016/j.actamat.2004.10.001 ↗
3. N. Nyan, Govind, C.N. Saikrishna, K. Venkata Ramaiah, S.K. Bhaumik, K. Suseelan Nair, and M.C. Mittal: Mater. Sci. Eng.: A, 2007, vol. 465, pp. 44–48.10.1016/j.msea.2007.04.039 ↗
4. S.K. Sadrnezhaad and S. Badakhshan Raz: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 395–403.10.1007/s11663-005-0068-2 ↗
5. B.Y. Tay, C.W. Goh, Y.W. Gu, C.S. Lim, M.S. Yong, M.K. Ho, and M.H. Myint: J. Mater. Processing Technol., 2008, vol. 202, pp. 359–64.10.1016/j.jmatprotec.2007.09.037 ↗
6. B.Y. Li, L. Rong, Y.Y. Li, and V.E. Gjunter: Acta Mater., 2000, vol. 48, pp. 3895–3904.10.1016/S1359-6454(00)00184-1 ↗
7. Y.F. Yang, H.Y. Wang, R.Y. Zhao, Y.H. Liang, L. Zhan, and Q.C. Jiang: J. Alloys Compd., 2008, vol. 460, pp. 276–82.10.1016/j.jallcom.2007.06.010 ↗
8. P. Bassani, E. Bassani, A. Tuissi, P. Giuliani, and C. Zanotti: J. Mater. Eng. Performance, 2014, vol. 23, pp. 2373–78.10.1007/s11665-014-1055-z ↗
9. M. Whitney, S.F. Corbin, and R.B. Gorbet: Acta Mater., 2008, vol. 56, pp. 559–70.10.1016/j.actamat.2007.10.012 ↗
10. N. Resnina, S. Belayev, and A. Voronkov: Intermetallics, 2013, vol. 32, pp. 81–89.10.1016/j.intermet.2012.08.009 ↗
11. N. Resnina, S. Belyaev, A. Voronkov, A. Krivosheev, and I. Ostapov: Mater. Sci. Eng., A, 2010, vol. 527, pp. 6364–67.10.1016/j.msea.2010.06.054 ↗
12. Y. Kim and K. Jeon: Phys. Proced., 2010, vol. 10, pp. 17–21.10.1016/j.phpro.2010.11.068 ↗
13. A. Biswas: Acta Mater., 2005, vol. 53, pp. 1415–25.10.1016/j.actamat.2004.11.036 ↗
14. M. Whitney, S. Corbin, and R. Gorbet: Intermetallics, 2009, vol. 17, pp. 894–906.10.1016/j.intermet.2009.03.018 ↗
15. M. Nevitt: Trans. TMS-AIME, 1960, vol. 218, pp. 327–31.
16. P. Novák, P. Pokorný, V. Vojtěch, A. Knaislová, A. Školáková, J. Čapek, M. Karlík, and J. Kopeček: Mater. Chem. Phys., 2015, vol. 155, pp. 113–21.10.1016/j.matchemphys.2015.02.007 ↗
17. J. Zhang, M. Sato, and A. Ishida: Acta Mater., 2003, vol. 51, pp. 3121–30.10.1016/S1359-6454(03)00124-1 ↗
18. P. Novák, A. Michalcová, A. Školáková, F. Průša, J. Kříž, I. Marek, T.F. Kubatík, M. Karlík, P. Haušild, and J. Kopeček: Acta Phys. Pol., A, 2015, vol. 128, pp. 561–64.10.12693/APhysPolA.128.561 ↗
19. P. Novák, A. Školáková, V. Vojtěch, A. Knaislová, P. Pokorný, H. Moravec, J. Kopeček, M. Karlík, and T.F. Kubatík: Manufact. Technol., 2014, vol. 14, pp. 387–92.10.21062/ujep/x.2014/a/1213-2489/MT/14/3/387 ↗
20. P. Novák, L. Mejzlíková, A. Michalcová, J. Čapek, P. Beran, and D. Vojtěch: Intermetallics, 2013, vol. 42, pp. 85–91.10.1016/j.intermet.2013.05.015 ↗
21. P. Novák, A. Školáková, D. Pignol, F. Průša, P. Salvetr, T. Kubatík, L. Perriere, and M. Karlík: Mater. Chem. Phys., 2016, vol. 181, pp. 295–300.10.1016/j.matchemphys.2016.06.062 ↗
22. R. Basu, M. Eskandari, L. Upadhayay, M. Mohtadi-Bonab, and J. Szpunar: J. Alloys Compd., 2015, vol. 645, pp. 213–22.10.1016/j.jallcom.2015.04.224 ↗
23. R. Santamarta, R. Arróyave, J. Pons, A. Evirgen, I. Karaman, H. Karaca, and R. Noebe: Acta Mater., 2013, vol. 61, pp. 6191–6206.10.1016/j.actamat.2013.06.057 ↗
24. T.B. Massalski: Binary Alloy Phase Diagrams, 2nd ed., ASM, Materials Park, OH, 1990.
25. N. El-Bagoury and A.A. Nofal: Mater. Sci. Technol., 2014, vol. 30, pp. 982–87.10.1179/1743284713Y.0000000427 ↗
26. M. Karlík, P. Haušild, P. Beran, P. Novák, J. Čapek, V. Kučera, and J. Kopeček: in Metal 2015, eds., 2015.
27. A.A. Nayeb-Hashemi and J.B. Clark: Bull. Alloy Phase Diagrams, 1985, vol. 6, pp. 238–44.10.1007/BF02880406 ↗
28. J. Bhagyaraj, K. Ramaiah, C. Saikrishna, S. Bhaumik, and Gouthama: J. Alloys Compd., 2013, vol. 581, pp. 344–51.10.1016/j.jallcom.2013.07.046 ↗
29. M. Thier, M. Huhner, E. Kobus, D. Drescher, C. Bourauel: Mater. Characterization, 1991, vol. 27, pp. 133–40.10.1016/1044-5803(91)90056-A ↗
30. G.E. Monastyrsky, V. Odnosum, J. Humbeeck, V. Kolomytsev, and N.Y. Koval: Intermetallics, 2002, vol. 10, pp. 95–103.10.1016/S0966-9795(01)00115-7 ↗
31. G. Monastyrsky, J. Humbeeck, V. Kolomytsev, and N. Koval: Intermetallics, 2002, vol. 10, pp. 613–24.10.1016/S0966-9795(02)00039-0 ↗
32. P. Salvetr, P. Novák, and H. Moravec: Manufact. Technol., 2015, vol. 15 (4), pp. 689–94.10.21062/ujep/x.2015/a/1213-2489/MT/15/4/689 ↗
33. P. Salvetr, T.F. Kubatík, and P. Novák: Manufact. Technol., 2016, vol. 16, pp. 804-08.10.21062/ujep/x.2016/a/1213-2489/MT/16/4/804 ↗
34. Z. Zhang, Z. Liu, J. Lu, X. Shen, F. Wang, and Y. Wang: Scripta Mater., 2014, vol. 81, pp. 56–59.10.1016/j.scriptamat.2014.03.011 ↗
35. J. Frenzel, A. Wieczorek, I. Opahle, B. Maaß, R. Drautz, and G. Eggeler: Acta Mater., 2015, vol. 90, pp. 213–31.10.1016/j.actamat.2015.02.029 ↗
36. K.W. Ng, H.C. Man, and T.M. Yue: Appl. Surf. Sci., 2008, vol. 254, pp. 6725–30.10.1016/j.apsusc.2008.04.076 ↗
37. K.W. Ng, H.C. Man, and T.M. Yue: Appl. Surf. Sci., 2011, vol. 257, pp. 3269–74.10.1016/j.apsusc.2010.10.154 ↗