Coarsening of Inter- and Intra-granular Proeutectoid Cementite in an Initially Pearlitic 2C-4Cr Ultrahigh Carbon Steel
Source abstract
Abstract
We have examined spheroidization and coarsening of cementite in an initially pearlitic 2C-4Cr ultrahigh carbon steel containing a cementite network. Coarsening kinetics of spheroidized cementite and growth of denuded zones adjacent to the cementite network were investigated by analyzing particle sizes from digital micrographs of water-quenched steel etched with Nital. Denuded zones grew at a rate proportional to t 1/4–t 1/5. Spheroidization of pearlite was completed within 90 minutes at 1073 K and 1173 K (800 °C and 900 °C), and within 5 minutes at 1243 K (970 °C). Bimodal particle size distributions were identified in most of the samples and were more pronounced at higher temperatures and hold times. Peaks in the distributions were attributed to the coarsening of intragranular and grain boundary particles at different rates. A third, non-coarsening peak of particles was present at 1073 K (800 °C) only and was attributed to particles existing prior to the heat treatment. Particle sizes were plotted vs time to investigate possible coarsening mechanisms. The coarsening exponent for the growth of grain boundary carbides was closest to 4, indicating grain boundary diffusion control. The coarsening exponent was closest to 5 for intragranular carbides, indicating suppression of volumetric diffusion (possibly due to reduced effective diffusivity because of Cr alloying) and control by dislocation diffusion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. J.R. Speer and W.L. Forster: US Pat. 1,346,343, 1913.10.1007/BF01495366 ↗
2. D.R. Lesuer, C.K. Syn, and O.D. Sherby: Ultrahigh Carbon Steel for Automotive Applications, SAE Technical Paper 960314, 1996.10.4271/960314 ↗
3. 3. D.R. Lesuer, C.K. Syn, A. Goldberg, J. Wadsworth, and O.D. Sherby: JOM, 1993, vol. 45, pp. 40–46.10.1007/BF03222405 ↗
4. 4. M.D. Hecht, B.A. Webler, and Y.N. Picard: Mater. Charact., 2016, vol. 117, pp. 134–43.10.1016/j.matchar.2016.04.012 ↗
5. 5. M.A. Hamidzadeh, M. Meratian, and A. Saatchi: Mater. Sci. Eng. A, 2013, vol. 571, pp. 193–98.10.1016/j.msea.2013.01.074 ↗
6. 6. K.P. Liu, X.L. Dun, J.P. Lai, and H.S. Liu: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8263–68.10.1016/j.msea.2011.07.038 ↗
7. 7. M.A. Hamidzadeh, M. Meratian, and M. Mohammadi Zahrani: Mater. Sci. Eng. A, 2012, vol. 556, pp. 758–66.10.1016/j.msea.2012.07.061 ↗
8. 8. A. Fernández-Vicente, M. Carsí, F. Penalba, E. Taleff, and O.A. Ruano: Mater. Sci. Eng. A, 2002, vol. 335, pp. 175–85.10.1016/S0921-5093(01)01916-5 ↗
9. 9. S.P. Rawal and J. Gurland: Metall. Trans. A, 1977, vol. 8, pp. 691–98.10.1007/BF02664778 ↗
10. 10. C.K. Syn, D.R. Lesuer, and O.D. Sherby: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1481–93.10.1007/BF02665480 ↗
11. 11. J. Gurland: Acta Metall., 1972, vol. 20, pp. 735–41.10.1016/0001-6160(72)90102-2 ↗
12. 12. Gene E. Lee, ed.: Rolls for the Metalworking Industries, Iron and Steel Society, Warrendale, PA, 2002.
13. 13. J.D. Verhoeven and E.D. Gibson: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1181–89.10.1007/s11661-998-0245-4 ↗
14. 14. I.M. Lifshitz and V.V. Slyozov: J. Phys. Chem. Solids, 1961, vol. 19, pp. 35–50.10.1016/0022-3697(61)90054-3 ↗
15. 15. C. Wagner: Zeitschrift Für Elektrochemie, 1961, vol. 65, pp. 581–591.
16. 16. M. Kahlweit: Adv. Colloid Interface Sci., 1975, vol. 5, pp. 1–35.10.1016/0001-8686(75)85001-9 ↗
17. 17. M. V. Speight: Acta Metall., 1968, vol. 16, pp. 133–35.10.1016/0001-6160(68)90081-3 ↗
18. 18. A.J. Ardell: Acta Metall., 1972, vol. 20, pp. 601–9.10.1016/0001-6160(72)90015-6 ↗
19. 19. B.A. Lindsley and A.R. Marder: Acta Mater., 1998, vol. 46, pp. 341–51.10.1016/S1359-6454(97)00165-1 ↗
20. 20. P. Deb and M.C. Chaturvedi: Metallography, 1982, vol. 354, pp. 341–54.
21. 21. A.R. Marder and B.L. Bramfitt: Metall. Trans. A, 1975, vol. 6, pp. 2009–14.10.1007/BF03161825 ↗
22. 22. W.J. Nam and C.M. Bae: Scr. Mater., 1999, vol. 41, pp. 313–18.10.1016/S1359-6462(99)00168-2 ↗
23. 23. A.M. Cree, R.G. Faulkner, and A.T. Lyne: Mater. Sci. Technol., 1995, vol. 11, pp. 566–71.10.1179/mst.1995.11.6.566 ↗
24. 24. Z.Q. Lv, S.H. Sun, Z.H. Wang, M.G. Qv, P. Jiang, and W.T. Fu: Mater. Sci. Eng. A, 2008, vol. 489, pp. 107–12.10.1016/j.msea.2007.12.005 ↗
25. 25. R.V. Day and J. Barford: Nature, 1968, vol. 217, pp. 1145–46.10.1038/2171145a0 ↗
26. 26. C.-Y. Li, J.. Blakely, and A.. Feingold: Acta Metall., 1966, vol. 14, pp. 1397–1402.10.1016/0001-6160(66)90159-3 ↗
27. 27. L. Richard and G. Krauss: Metall. Trans. A, 1976, vol. 7, pp. 983–89.10.1007/BF02644064 ↗
28. 28. A.A. Vasilyev, S.F. Sokolov, N.G. Kolbasnikov, and D.F. Sokolov: Phys. Solid State, 2011, vol. 53, pp. 2194–2200.10.1134/S1063783411110308 ↗
29. 29. G.H. Zhang, J.Y. Chae, K.H. Kim, and D.W. Suh: Mater. Charact., 2013, vol. 81, pp. 56–67.10.1016/j.matchar.2013.04.007 ↗
30. 30. J.O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
31. F.S. Birks, N., Meier, and G.H. Pettit: Introduction to the High Temperature Oxidation of Metals, 2nd ed., Cambridge University Press, 2006.10.1017/CBO9781139163903 ↗
32. 32. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671–75.10.1038/nmeth.2089 ↗
33. S.A. Saltikov: in Proc. Second Int. Congr. Stereol., Hans Elias, ed., Springer, Chicago, 1967, pp. 163–73.
34. 34. D.L. Sahagian and A.A. Proussevitch: J. Volcanol. Geotherm. Res., 1998, vol. 84, pp. 173–96.10.1016/S0377-0273(98)00043-2 ↗
35. 35. E. Limpert, W. a. Stahel, and M. Abbt: Bioscience, 2001, vol. 51, p. 341.10.1641/0006-3568(2001)051[0341:LNDATS]2.0.CO;2 ↗
36. 36. J. Heintzenberg: Aerosol Sci. Technol., 1994, vol. 21, pp. 46–48.10.1080/02786829408959695 ↗
37. 37. D.P. Yao, Y.Z. Zhang, Z.Q. Hu, Y.Y. Li, and C.X. Shi: Scr. Metall., 1989, vol. 23, pp. 537–41.10.1016/0036-9748(89)90447-X ↗
38. 38. T. Krol, D. Baither, and E. Nembach: Acta Mater., 2004, vol. 52, pp. 2095–2108.10.1016/j.actamat.2004.01.011 ↗
39. 39. R.W. Heckel: Trans. Am. Soc. AIME, 1965, vol. 233, pp. 1994–2000.
40. 40. K.M. Vedula and R.W. Heckel: Metall. Trans., 1970, vol. 1, pp. 9–18.10.1007/BF02819236 ↗