journal article·2012-11

Effects of CaF2 Coating on the Microstructures and Mechanical Properties of Tungsten Inert Gas Welded AZ31 Magnesium Alloy Joints

Jun Shen, Linzhi Wang, Dong Peng, Dan Wang

Publisher page

Abstract

The effects of CaF2 coating on the macromorphologies of the welded seams were studied by morphological analysis. Microstructures and mechanical properties of butt joints welded with different amounts of CaF2 coatings were investigated using optical microscopy and tensile tests. The welding defects formed in the welded seams and the fracture surfaces were analyzed by scanning electron microscopy. An increase in the amount of CaF2 coating deteriorated the appearances of the welded seams but it improved the weld penetration depth and the depth/width (D/W) ratio of the tungsten inert gas (TIG) welded joints. The α-Mg grains and Mg17(Al,Zn)12 intermetallic compound (IMC) were coarser in the case of a higher amount of CaF2 coating. The increase in the amount of CaF2 coating reduced the porosities and total length of solidification cracks in the fusion zone (FZ). The ultimate tensile strength (UTS) value and elongation increased at first and then decreased sharply.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. S.M. Gurevich, V.N. Zamkov, and N.A. Kushmienko: Avtom. Svarka, 1965, vol. 9, pp. 1–4.
2. S.M. Gurevich and V.N. Zamkov: Avtom. Svarka, 1966, vol. 12, pp. 13–16.
3. G.J. Dunn, C.D. Allemand, and T.W. Eager: Mater. Trans. A, 1986, vol. 17, pp. 1851–63.10.1007/BF02817281 ↗
4. Q.M. Li, X.H. Wang, Z.D. Zou, and J. Wu: Trans. Nonferrous. Met. Soc. China, 2007, vol. 17, pp. 486–90.10.1016/S1003-6326(07)60120-4 ↗
5. C.R. Heiple and J.R. Roper: Weld. J., 1981, vol. 60, pp. 143–45.
6. S.P. Lu, H. Fujii, and K. Nogi: Mater. Sci. Eng. A, 2004, vol. 380, pp. 290–97.10.1016/j.msea.2004.05.057 ↗
7. L.M. Liu, Y. Shen, and Z.D. Zhang: Sci. Technol. Weld. Join., 2006, vol. 11, pp. 398–402.10.1179/174329306X129526 ↗
8. L.M. Liu, Z.D. Zhang, G. Song, and L. Wang: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 649–58.10.1007/s11661-006-9056-7 ↗
9. Z.D. Zhang, L.M. Liu, Y. Shen, and L. Wang: Mater. Charact., 2008, vol. 59, pp. 40–46.10.1016/j.matchar.2006.10.012 ↗
10. Z.D. Zhang, L.M. Liu, Y. Shen, and L. Wang: Sci. Technol. Weld. Join., 2005, vol. 10, pp. 737–43.10.1179/174329305X70702 ↗
11. L. Wang, J. Shen, and N. Xu: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7276–84.10.1016/j.msea.2011.06.014 ↗
12. P.J. Modenesi, E.R. Apolinário, and I.M. Pereira: J. Mater. Process. Technol., 2000, vol. 99, pp. 260–65.10.1016/S0924-0136(99)00435-5 ↗
13. F.Y. Liu, S.B. Lin, C.L. Yang, and L. Wu: Mater. Sci. Technol., 2002, vol. 10, pp. 310–13.
14. J.L. Xu and C. Chen: Acta Metrologica Sinica, 2004, vol. 4, pp. 369–73.
15. F.Y. Liu, C.L. Yang, S.B. Lin, L. Wu, and S. Sheng: Trans. Nonferrous. Met. Soc. China, 2003, vol. 13, pp. 877–80.
16. T.P. Zhu, Z.W. Chen, and W. Gao: Mater. Charact., 2008, vol. 59, pp. 1550–58.10.1016/j.matchar.2008.01.022 ↗
17. J. Kupczyk: Mater. Charact., 2006, vol. 57, pp. 171–75.10.1016/j.matchar.2006.01.006 ↗
18. J. Shen, G.Q. You, S.Y. Long, and F.S. Pan: Mater. Charact., 2008, vol. 59, pp. 1059–65.10.1016/j.matchar.2007.08.021 ↗
19. K. Zeng, T. Klassen, W. Oelerich, and R. Bormann: Int. J. Hydrogen. Energy, 1999, vol. 24, pp. 989–1004.10.1016/S0360-3199(98)00132-3 ↗
20. M. Amin: Met. Construct., 1984, vol. 15, pp. 272–78.
21. W.G. Essers and M.R.M. Van Gompel: Weld. J., 1984, vol. 6, pp. 321–26.
22. H. Zhao and T. Debroy: Weld. Res. Suppl., 2004, vol. 8, pp. 204–10.
23. M.L. Wu, S.R. Yu, G.J. Zhang, and J.H. Xiong: Weld, 2006, vol. 15, pp. 36–38.
24. Z. Sun, D. Pan, and J. Wei: Sci. Technol. Weld. Join., 2002, vol. 7, pp. 343–51.10.1179/136217102225006831 ↗
25. Y.J. Quan, Z.H. Chen, X.S. Gong, and Z.H. Yu: Mater. Sci. Eng. A, 2008, vol. 496, pp. 45–51.10.1016/j.msea.2008.04.065 ↗
26. W.B. Ding, H.Y. Jiang, X.Q. Zeng, D.H. Li, and S.S. Yao: Mater. Lett., 2007, vol. 61, pp. 496–501.10.1016/j.matlet.2006.04.113 ↗
27. L.M. Liu and C.F. Dong: Mater. Lett., 2006, vol. 60, pp. 2194–97.10.1016/j.matlet.2005.12.120 ↗