journal article·2012-10

Laser-Surface Alloying of Nimonic 80 with Silicon and Aluminum and its Oxidation Behavior

Jyotsna Dutta Majumdar, Indranil Manna

Publisher page

Abstract

In the current study, laser-surface alloying (LSA) of Nimonic 80 (a Ni-based superalloy) was conducted using a high-power continuous wave (CW) CO2 laser by simultaneous feeding of predetermined proportion of elemental Si and Al powders with an Ar shroud. After LSA, the microstructure of the alloyed zone was carefully analyzed and found to consist of several intermetallic phases of Ni and Si. The microhardness of the alloyed zone was significantly increased to 500 VHN compared with 250 VHN of the as-received substrate. The high-temperature oxidation resistance of the laser-surface-alloyed specimens (under isothermal conditions) was improved (at temperature ranges between 1223 K and 1423 K [950 °C and 1150 °C]) compared with as-received Nimonic. Even though LSA enhanced resistance to oxidation up to a limited period, continued exposure to extended hours (at a given temperature) led to spallation of scale. It seems that a SiO2-rich adherent scale is responsible for enhanced protection against oxidation in the laser-surface-alloyed specimens. However, the presence of Al2O3 in the oxide film enhances the resistance to spallation by increasing the scale adherence at a higher temperature. The results are supported by a suitable thermodynamic calculation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. V. Gopal Krishna, J.S. Yadav, A. Kumar, and B. Saha: Aerospace Materials, vol. 1, B. Gupta, ed., S. Chand and Co. Ltd., New Delhi, India, 1996, p. 39.
2. R.J.E. Glenny, J.E. Northwood, and A. Burwood-Smith: Int. Metals. Rev., 1975, vol. 20, pp. 1–28.10.1179/095066075790136925 ↗
3. W.J. Boesch and J.S. Slaney: Metall. Progr., 1964, vol. 86, pp. 109–11.
4. D.S. Duvall and D.L. Ruckle: Ceramic Thermal Barrier Coatings for Turbine Engine Components, ASME Paper 82-GT-332, 1982.10.1115/82-GT-322 ↗
5. R.L. Jones: Metallurgical and Ceramic Protective Coatings, K.H. Stern, ed., Chapman and Hall, London, U.K., 1996, pp. 194–235.10.1007/978-94-009-1501-5_8 ↗
6. D. Schlager, C. Theiler, and H. Kohn: Mater. Corros., 2002, vol. 53, pp. 103–10.10.1002/1521-4176(200202)53:2<103::AID-MACO103>3.0.CO;2-R ↗
7. H.L. Du, P.K. Datta, J.S. Burnell-Gray, A.S. James, and A. Matthews: Surf. Coat. Technol., 1996, vol. 81, pp. 151–58.10.1016/0257-8972(95)02536-7 ↗
8. J.D. Majumdar, B.L. Mordike, S.K. Roy, and I. Manna: Oxid. Met., 2002, vol. 57, pp. 473–9810.1023/A:1015300405051 ↗
9. D.R. Gabe: Principles of Metal Surface Treatment and Protection, Pergamon Press, New York, NY, 1972, p. 82.
10. P.A. Molian: Surface Modification Technologies—An Engineer’s Guide, T.S. Sudarshan, ed., Marcel Dekker Inc., New York, NY, 1989, p. 1.
11. C.W. Draper and J.M. Poate: Int. Metals. Rev., 1985, vol. 30, pp. 85–108.10.1179/095066085790150117 ↗
12. J.D. Majumdar and I. Manna: Int. Mater. Rev., 2011, vol. 56, pp. 341–88.10.1179/1743280411Y.0000000003 ↗
13. L.E. Rehn, S.T. Picraux, and H. Wiedersich: Surface Alloying by Ion, Electron and Laser Beams, L.E. Rehn, S.T. Picraux, and H. Wiedersich, eds., ASM, Materials Park, OH, 1987, p. 1.
14. W.M. Steen: Laser Material Processing, Springer Verlag, London, U.K., 1991, p. 153.10.1007/978-1-4471-3820-4 ↗
15. J.D. Majumdar and I. Manna: Laser Eng., 2002, vol. 12, pp. 171–90.10.1080/0898150021000039284 ↗
16. E.A. Brandes: Smithells Metals Reference Book, Butterworths, London, U.K., 1968, p. 14-1.
17. N. Birks and G.H. Meier: Introduction to High Temperature Oxidation of Metals, Edward Arnold Ltd., London, U.K., 1983.
18. M.G. Fontana: Corrosion Engineering, McGraw-Hill, New York, NY, 1987, p. 71.
19. H.E. Evans: Int. Mater. Rev., 1995, vol. 40, pp. 1–40.10.1179/095066095790151124 ↗