journal article·2012-04

In Situ Observations of the Deformation Behavior and Fracture Mechanisms of Ti-45Al-2Nb-2Mn + 0.8 vol pct TiB2

Rocio Muñoz-Moreno, Carl J. Boehlert, M. Teresa Pérez-Prado, Elisa M. Ruiz-Navas, Javier Llorca

Publisher page

Abstract

The deformation and fracture mechanisms of a nearly lamellar Ti-45Al-2Nb-2Mn (at. pct) + 0.8 vol pct TiB2 intermetallic, processed into an actual low-pressure turbine blade, were examined by means of in situ tensile and tensile-creep experiments performed inside a scanning electron microscope (SEM). Low elongation-to-failure and brittle fracture were observed at room temperature, while the larger elongations-to-failure at high temperature facilitated the observation of the onset and propagation of damage. It was found that the dominant damage mechanisms at high temperature depended on the applied stress level. Interlamellar cracking was observed only above 390 MPa, which suggests that there is a threshold below which this mechanism is inhibited. Failure during creep tests at 250 MPa was controlled by intercolony cracking. The in situ observations demonstrated that the colony boundaries are damage nucleation and propagation sites during tensile creep, and they seem to be the weakest link in the microstructure for the tertiary creep stage. Therefore, it is proposed that interlamellar areas are critical zones for fracture at higher stresses, whereas lower stress, high-temperature creep conditions lead to intercolony cracking and fracture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. E.A. Loria: Intermetallics, 2000, vol. 8, pp. 1339–45.10.1016/S0966-9795(00)00073-X ↗
2. M. Yamaguchi, H. Inui, and K. Ito: Acta Mater., 2000, vol. 48, pp. 307–22.10.1016/S1359-6454(99)00301-8 ↗
3. G. Lütjering and J.C. Williams: Titanium. Engineering Materials and Processes, 2nd ed., Springer-Verlag, Berlin, 2007, pp. 337–66.
4. C. Mercer, J. Lou, S.M. Allameh, and W.O. Soboyejo: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2781–94.10.1007/s11661-001-1029-2 ↗
5. V. Recina: Mater. Sci. Technol., 2000, vol. 16, pp. 333–40.10.1179/026708300101507749 ↗
6. T.A. Parthasarathy, M.G. Mendiratta, and D.M. Dimiduk: Scripta Mater., 1997, vol. 37, no. 3, pp. 315–21.10.1016/S1359-6462(97)00099-7 ↗
7. T.A. Parthasarathy, M. Keller, and M.G. Mendiratta: Scripta Metall., 1998, vol. 38, no. 7, pp. 1025–31.10.1016/S1359-6462(98)00014-1 ↗
8. J. Beddoes, L. Zhao, P. Au, D. Dudzinski, and J. Triantafillou: Structural Intermetallics, TMS, Warrendale, PA, 1997, pp. 109–18.
9. W.R. Chen, J. Triantafillou, J. Beddoes, and L. Zhao: Intermetallics, 1999, vol. 7, pp. 171–78.10.1016/S0966-9795(98)00019-3 ↗
10. K. Maruyama, R. Yamamoto, H. Nakakuki, and N. Fujitsuna: Mater. Sci. Eng. A, 1997, vols. 239, 240, pp. 419–28.10.1016/S0921-5093(97)00612-6 ↗
11. C.E. Wen, K. Yasue, J.G. Lin, Y.G. Zhang, and C.Q. Chen: Intermetallics, 2000, vol. 8, pp. 525–29.10.1016/S0966-9795(99)00131-4 ↗
12. H.S. Park, S.K. Hwang, C.M. Lee, Y.C. Yoo, S.N. Nam, and N.J. Kim: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 251–59.10.1007/s11661-001-0256-x ↗
13. H. Zhu, D.Y. Seo, K. Mayurama, and P. Au: Mater. Sci. Eng. A, 2008, vols. 483–484, pp. 533–36.10.1016/j.msea.2006.09.137 ↗
14. C.J. Boehlert, D.M. Dimiduk, and K.J. Hemker: Scripta Mater., 2002, vol. 46, no. 4, pp. 259–67.10.1016/S1359-6462(01)01228-3 ↗
15. H. Zhu, D.Y. Seo, and P. Au: Scripta Mater., 2006, vol. 54, pp. 1979–84.10.1016/j.scriptamat.2006.03.023 ↗
16. P.M. Hazzledine and D.M. Dimiduk: Structural Intermetallics, TMS, Warrendale, PA, 1997, pp. 481–87.
17. J.N. Wang and K. Xie: Intermetallics, 2000, vol. 8, pp. 545–48.10.1016/S0966-9795(99)00153-3 ↗
18. G. Cao, L. Fu, J. Lin, Y. Zhang, and C. Chen: Intermetallics, 2000, vol. 8, pp. 647–53.10.1016/S0966-9795(99)00128-4 ↗
19. Y.H. Lu, Y.G. Zhang, L.J. Qiao, Y.B. Wang, C.Q. Chen, and W.Y. Chu: Intermetallics, 2000, vol. 8, pp. 1443–45.10.1016/S0966-9795(00)00094-7 ↗
20. J. Cheng, W. Jianguo, and C. Wenjue: Scripta Metall. Mater., 1995, vol. 32, no. 10, pp. 1579–84.10.1016/0956-716X(95)00239-R ↗
21. C.J. Boehlert, S.C. Longanbach, and T.R. Bieler: Phil. Mag., 2008, vol. 88, no. 5, pp. 641–64.10.1080/14786430801944836 ↗
22. C.J. Boehlert, C.J. Cowen, S. Tamirisakandala, D.J. McEldowney, and D.B. Miracle: Scripta Mater., 2006, vol. 55, pp. 465–68.10.1016/j.scriptamat.2006.05.008 ↗
23. C.J. Cowen and C.J. Boehlert: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 26–34.10.1007/s11661-006-9004-6 ↗
24. W. Chen and C.J. Boehlert: Int. J. Fatigue, 2010, vol. 32, no. 5, pp. 799–807.10.1016/j.ijfatigue.2009.06.002 ↗
25. J.E. Hilliard: Metall. Progr, 1964, vol. 78, pp. 99–100.
26. ASTM E112-96e3, Standard Test Methods for Determining Average Grain Size.
27. M.J. Blackburn: The Science, Technology and Application of Titanium, R.I. Jaffe and N.E. Promisel, eds., Pergamon Press, Oxford, UK, 1970, p. 663.
28. D.E. Larsen, S. Kampe, and L. Christodoulou: Mater. Res. Soc. Symp. Proc., 1990, vol. 194, p. 285.10.1557/PROC-194-285 ↗
29. R.A. Mirshams, Z.X. Li, and H.P. Mohamadian: J. Mater. Sci. Lett., 1997, vol. 16, pp. 715–18.10.1023/A:1018516727620 ↗
30. K. Liu, Y.C. Ma, M. Gao, G.B. Rao, Y.Y. Li, K. Wei, X. Wu, and M.H. Loretto: Intermetallics, 2005, vol. 13, pp. 925–28.10.1016/j.intermet.2004.12.004 ↗
31. Y.H. Wang, J.P. Lin, Y.H. He, Y.L. Wang, and G.L. Chen: J. Alloys Compd., 2009, vol. 468, pp. 505–11.10.1016/j.jallcom.2008.01.057 ↗
32. D.Y. Seo, L. Zhao, and J. Beddoes: Mater. Sci. Eng. A, 2002, vols. A329–A331, pp. 130–40.10.1016/S0921-5093(01)01546-5 ↗
33. A. Couret, G. Molénat, J. Galy, and M. Thomas: Intermetallics, 2008, vol. 16, pp. 1134–41.10.1016/j.intermet.2008.06.015 ↗
34. T.A. Parthasarathy, P.R. Subramanian, M.G. Mendiratta, and D.M. Dimiduk: Acta Mater., 2000, vol. 48, pp. 541–51.10.1016/S1359-6454(99)00347-X ↗
35. M. Hazzledine and B.K. Kad: Mater. Sci. Eng. A, 1995, vols. 192, 193, pp. 340–46.10.1016/0921-5093(94)03216-5 ↗
36. H. Inui, M.H. Oh, A. Nakamura, and M. Yamaguchi: Acta Metall. Mater., 1992, vol. 40, no. 11, pp. 3095–104.10.1016/0956-7151(92)90472-Q ↗
37. F. Appel and M. Oehring: GKSS Research Center Geesthacht GmbH, Geesthacht, Germany, Titanium and Titanium Alloys: Fundamentals and Applications, Wiley-VCH, Weinheim, Germany, 2003, pp. 89–152.
38. F. Appel: Intermetallics, 2001, vol. 9, pp. 907–14.10.1016/S0966-9795(01)00089-9 ↗
39. T.G. Langdon: Phil. Mag., 1970, vol. 22, pp. 689–700.10.1080/14786437008220939 ↗