Determination of Solid Fraction from Cooling Curve
Source abstract
Abstract
A new method to determine directly the solid fraction using the cooling curve was proposed for solidification of undercooled melts. Then, to construct three different baselines, a sudden function ξα(x) is introduced. In terms of the ξα(x) function, accordingly, the solid fractions during solidification of Ni-3.3 wt pct B, Al-7 wt pct Si, Al-14 wt pct Cu, and Fe-4.56 wt pct Ni alloys were predicted. The predictions of the primary, the regular lamellar eutectic, the anomalous eutectic, and the peritectic phases from cooling curves of the solidified samples coincide with the results of measurement or the available methods.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. W. Yang, F. Liu, H. Liu, H.F. Wang, G.C. Yang, and Y.H. Zhou: J. Cryst. Growth, 2009, vol. 311, pp. 3225–30.10.1016/j.jcrysgro.2009.03.030 ↗
2. J.W. Gibbs, M.J. Kaufman, R.E. Hackenberg, and P.F. Mendez: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2216–23.10.1007/s11661-010-0318-z ↗
3. C.G. Levi and R. Mehrabian: Metall. Trans. B, 1980, vol. 11B, pp. 21–27.10.1007/BF02657167 ↗
4. C.G. Levi and R. Mehrabian: Metall. Trans. A, 1982, vol. 13A, pp. 221–34.10.1007/BF02643312 ↗
5. M. Barth, F. Joo, B. Wei, D.M. Herlach: J. Non-Cryst. Solids, 1993, vol. 156–158, pp. 398–401.10.1016/0022-3093(93)90205-C ↗
6. A. Çetin and A. Kalkanli: Can. Metall. Q., 2005, vol. 44, pp. 1–6.10.1179/cmq.2005.44.1.1 ↗
7. G. Vedovato, A. Zambon, and E. Ramous: Mater. Sci. Eng. A, 2001, vol. 304–306, pp. 235–39.10.1016/S0921-5093(00)01475-1 ↗
8. A.M. Saleh and R.A. Clemente: Jpn. J. Appl. Phys., 2004, vol. 43, pp. 3624–28.10.1143/JJAP.43.3624 ↗
9. C.-A. Gandin, S. Mosbah, T. Volkmann, and D.M. Herlach: Acta Mater., 2008, vol. 56, pp. 3023–35.10.1016/j.actamat.2008.02.041 ↗
10. D.M. Stefanescu, G. Upadhya, and D. Bandyopadhyay: Metall. Trans. A, 1990, vol. 21A, pp. 997–1005.10.1007/BF02656584 ↗
11. M. Malekan and S.G. Shabestari: J. Therm. Anal. Calorim., 2011, vol. 103, pp. 453–58.10.1007/s10973-010-1023-2 ↗
12. S. Farahany, A. Ourdjini, and M.H. Idris: J. Therm. Anal. Calorim., 2011, June, Online First.
13. D. Emadi, L. Whiting, M. Djurdjevic, W.T. Kierkus, and J. Sokolowski: MJoM, 2004, vol. 10, pp. 91–106.10.30544/379 ↗
14. J.W. Gibbs and P.F. Mendez: Scripta Mater., 2008, vol. 58, pp. 699–702.10.1016/j.scriptamat.2007.12.022 ↗
15. W. Yang, F. Liu, and G.C. Yang: Adv. Mater. Res., 2010, vol. 97–101, pp. 995–98.10.4028/www.scientific.net/AMR.97-101.995 ↗
16. W. Yang, F. Liu, H.F. Wang, Z. Chen, G.C. Yang, and Y.H. Zhou: J. Alloy. Compd., 2010, vol. 491, pp. 118–22.10.1016/j.jallcom.2009.10.150 ↗
17. J.F. Xu, F. Liu, K. Zhang, and M.M. Gong: Mater. Sci. Technol., 2011, DOI:10.1179/1743284711Y.0000000030.10.1179/1743284711Y.0000000030 ↗
18. Y.Z. Chen, F. Liu, G.C. Yang, N. Liu, C.L. Yang, and Y.H. Zhou: Scripta Mater., 2007, vol. 57, pp. 779–82.10.1016/j.scriptamat.2007.06.051 ↗
19. Y.Z. Chen, F. Liu, G.C. Yang, and Y.H. Zhou: J. Mater. Res., 2010, vol. 25, pp. 1025–29.10.1557/JMR.2010.0156 ↗
20. D.M. Herlach: Mater. Sci. Eng. R, 1994, vol. R12, pp. 177–272.10.1016/0927-796X(94)90011-6 ↗