journal article·2007-11

Effects of Degree of Deformation and Deformation Temperature on Primary Recrystallization Textures in Polycrystalline Nickel

H. Chang, I. Baker

Publisher page

Abstract

The effects of both deformation temperature and degree of deformation on the deformation texture, recrystallization behavior, and recrystallization texture were studied for cold-rolled, high-purity, polycrystalline nickel. Differential scanning calorimetry was used to determine both the stored energy of deformation and the recrystallization temperature, and electron backscatter patterns were employed to reveal both the deformation and recrystallization textures of nickel rolled to either 90 pct thickness reduction at −196 °C, 25 °C, and 200 °C or rolled to 90, 95, and 98 pct thickness reductions at 25 °C. The results show that decreasing the rolling temperature below room temperature increased the stored energy considerably and decreased the recrystallization temperature, whereas increasing the rolling temperature had no effect on either the stored energy or the recrystallization temperature. These different rolling temperatures had little effect on the cube texture produced by primary recrystallization. In contrast, increasing the rolling reduction increased the stored energy (at least from 90 to 95 pct), decreased the primary recrystallization temperature, and also sharpened the primary-recrystallized cube texture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Magnetic Properties and Applications · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. K. Lücke, K Detert: Acta Metall., 1951, vol. 5, p. 628–3710.1016/0001-6160(57)90109-8 ↗
2. R.D. Doherty: Progr. Mater. Sci., 1997, vol. 42, p. 39–5810.1016/S0079-6425(97)00007-8 ↗
3. R. Carel, C.V. Thompson, H.J. Frost: Acta Mater., 1996, vol. 44, p. 2479–9410.1016/1359-6454(95)00365-7 ↗
4. I. Baker, J. Li: Micr. Res. Technique, 2004, vol. 63 (5), p. 289–9710.1002/jemt.20042 ↗
5. J. Li, I. Baker: Mater. Sci. Eng. A, 2005, vol. 392, p. 8–2210.1016/j.msea.2004.07.017 ↗
6. A. Goyal, D.P. Norton, J.D. Budai, M. Paranthaman, E.D. Specht, D.M. Kroeger, D.K. Christen, Q. He, B. Saffian, F.A. List, D.F. Lee, P.M. Martin, C.E. Klabunde, E. Hartfield, V.K. Sikk: Appl. Phys. Lett., 1996, vol. 69, p. 1795–9710.1063/1.117489 ↗
7. A. Goyal, E.D. Specht, D.M. Kroeger, and M. Paranthaman: U.S. Patent 5,964,966, 1999
8. B. De Boer, J. Eickemeyer, N. Reger, L. Fernandez, B. Holzapfel, L. Schultz, W. Prusseit, P. Berberich: Acta Mater., 2001, vol. 49, p. 1421–2810.1016/S1359-6454(01)00041-6 ↗
9. D.P. Norton, A. Goyal, J.D. Budai, D.K. Christen, D.M. Kroeger, E.D. Specht, Q. He, B. Saffian, M. Paranthaman, C.E. Klabunde, D.F. Lee, B.C. Sales, F.A. List: Science, 1996, vol. 274, p. 755–5710.1126/science.274.5288.755 ↗
10. E.D. Specht, A. Goyal, D.F. Lee, List FA, D.M. Kroeger, M. Paranthaman, R.K. Williams, D.K. Christen: Supercond. Sci. Technol., 1998, vol. 11, p. 945–4910.1088/0953-2048/11/10/009 ↗
11. F.P. Incropera, D.P. DeWitt: Fundamentals of Heat and Mass Transfer, John Wiley & Sons, New York, NY, 1981, p. 175
12. V. Randle, O. Engler: Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping, CRC Press, New York, NY, 2000, p. 105–0810.1201/9781482287479 ↗
13. I. Baker, L. Liu, D. Mandal: Scripta Metall. Mater., 1995, vol. 32, p. 167–7110.1016/S0956-716X(99)80031-4 ↗
14. I.V. Gervas’eva, D.P. Rodionov, B.K. Sokolov, Y.V. Khlebnikova, D.V. Dolgikh: Phys. Met. Metall., 2000, vol. 90, p. 295–301
15. H. Chang and I. Baker: Mater. Sci. Eng., 2007, in press
16. P. Cotterill, P.R. Mould: Recrystallization and Grain Growth in Metals, John Wiley & Sons, New York, NY, 1976, p. 24
17. R.A. Vandermeer: Trans. TMS-AIME, 1967, vol. 239, p. 202
18. I.A. Gindin, V.K. Aksenov, I.F. Borisova, Y.D. Starodubov: Fiz. Metal. Metalloved., 1975, vol. 39, p. 88–93
19. I.A. Gindin, Y.D. Starodubov, V.I. Khotkevich: Fiz. Metal. Metalloved., 1976, vol. 24, p. 149
20. I.A. Gindin, Y.D. Starodubov, V.K. Aksenov: Ukr. Fiz. Zh., 1974, vol. 19, p. 1834
21. I.A. Gindin, M.B. Lazareva, V.M. Matsevit, Y.D. Starodubov: Phys. Met. Metall., 1969, vol. 28, p. 193–95
22. R. Nast, B. Obst, W. Goldacker, and W. Schauer: Mater. Res. Soc. Symp., 2001, vol. 659, paper II 103110.1557/PROC-659-II10.3 ↗
23. K. Lücke, K. Detert: Acta Metall., 1957, vol. 5, p. 628–3710.1016/0001-6160(57)90109-8 ↗
24. K. Lücke, O. Engler: Proc. ICAA3, Norwegian Institute of Technology, Trondheim, Norway, 1992, p. 439–52
25. A. Ridha, W. Hutchinson: Acta Metall., 1982, vol. 30, p. 1929–3910.1016/0001-6160(82)90033-5 ↗
26. D. Raabe: Acta Metall. Mater., 1995, vol. 43, p. 1023–2810.1016/0956-7151(94)00302-X ↗
27. D. Raabe: Acta Mater., 1996, vol. 44, p. 937–5110.1016/1359-6454(95)00243-X ↗
28. B.K. Sokolov, I.V. Gervas’eva, D.P. Rodionov, Y.V. Khlebnikova, L.R. Vladimirov, R.A. Schwartser: Phys. Met. Metall., 2005, vol. 99, p. 172–82
29. O. Daaland, C. Maurice, J. Driver, G.M. Raynaud, P. Lequeu, J. Strid, E. Nes: Proc. ICAA3, Norwegian Institute of Technology, Trondheim, Norway, 1992, p. 297–304
30. H. Weiland, J. Hirsch: Proc. ICOTOM 9, Special Issue of Texture and Microstructures, Avignon, France, 1991, p. 647–52
31. R.D. Doherty, I.K. Kashyap, S. Panchanadeeswaran: Acta Metall. Mater., 1993, vol. 41, p. 3029–5310.1016/0956-7151(93)90117-B ↗
32. O. Daaland, E. Nes: Acta Mater., 1995, vol. 44, p. 138910.1016/1359-6454(95)00289-8 ↗
33. C. Maurice, J.H. Driver: Acta Metall., 1993, vol. 41, p. 1653–6410.1016/0956-7151(93)90185-U ↗