Interface- and diffusion-limited capillary rise of reactive melts with a transient contact angle
Source abstract
Abstract
The kinetics of unidirectional capillary penetration by a reactive fluid under the limiting cases of diffusion control and interface control has been derived for the reactive infiltration phenomenon characterized by a shrinking capillary radius due to interphase formation and an exponentially decaying contact angle. The computational outcomes for the reactive penetration of Si3N4 capillaries by AgCuTi brazes and of carbon capillaries by Si show that greater lengths are attained at lower values of the parabolic rate constant (under diffusion control), and the limiting length is reached earlier at larger values of the linear rate constant (under interface control). A capillary-driven flow analysis (Washburn equation) overestimates the infiltration kinetics, whereas an analysis that considers pore shrinkage but assumes the contact angle and the capillary pressure to be constant during flow underestimates the kinetics. The penetration lengths predicted by the analysis at pore closure due to reaction choking exhibit a slightly better agreement with the recent measurements in the Si/C system than the models of reactive flows currently in vogue.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Block Copolymer Self-Assembly · Surface Modification and Superhydrophobicity · Fluid Dynamics and Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. D.C. Dunand, J.L. Sommer, and A. Mortensen: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 2161–70.10.1007/BF02648590 ↗
2. Y.M. Chiang, R.P. Messner, C.D. Terwilliger, and D.R. Behrendt: Mater. Sci. Eng., 1991, vol. A144, p. 63.10.1016/0921-5093(91)90210-E ↗
3. M. Singh and D. Behrendt: Mater. Sci. Eng., 1995, vol. A194, p. 193.10.1016/0921-5093(94)09663-5 ↗
4. E. Fritzer and R. Gadow: Proc. Int. Symp. Ceramic Components for Engines, 1983, KTK Science Publ., Tokyo, Japan, 1984, p. 561.
5. A.E.W. Jarfors, L. Svendsen, M. Wallinder, and H. Fredriksson: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 2577–83.10.1007/BF02646536 ↗
6. Y. Gao, J. Jia, R.E. Loehman, and K.G. Ewsuk: J. Mater. Res., 1995, vol. 10 (5), p. 1216.10.1557/JMR.1995.1216 ↗
7. E. Taheri-Nassaj, M. Kobashi, and T. Choh: Scripta Mater., 1996, vol. 34 (8), p. 1257.10.1016/1359-6462(95)00639-7 ↗
8. R.P. Messner and Y-.M. Chiang: J. Am. Ceram. Soc., 1990, vol. 73 (5), p. 1193.10.1111/j.1151-2916.1990.tb05179.x ↗
9. D. Muscat and R.A.L. Drew: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2357–70.10.1007/BF02648856 ↗
10. P. Sangsuwan, S.N. Tewari, J.E. Gatica, M. Singh, and R. Dickerson: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 933–44.10.1007/s11663-999-0099-1 ↗
11. J. Narcisco, C. Garcia-Cordavilla, and E. Louis: Acta Metall. Mater., 1997, vol. 45 (12), p. 5111.10.1016/S1359-6454(97)00202-4 ↗
12. W.G. Fahrenholtz, K.G. Ewsuk, R.E. Loehman, and P. Liu: J. Am. Ceram. Soc., 1998, vol. 81 (10), p. 2533.10.1111/j.1151-2916.1998.tb02658.x ↗
13. A. Mortensen, C. San Marchi, and V.J. Michaud: in High-Temperature Capillarity, N. Eustathopoulos and N. Sobczak, eds., Foundry Research Institute, Krakow, 1997, p. 249.
14. R.E. Loehman, K. Ewsuk, and A.P. Tomsia: J. Am. Ceram. Soc., 1996, vol. 79 (1), p. 27.10.1111/j.1151-2916.1996.tb07876.x ↗
15. V.M. Kevorkijan: Composites Sci. Technol., 1999, vol. 59, p. 683.10.1016/S0266-3538(98)00116-X ↗
16. C. Toy and W.D. Scott: J. Am. Ceram. Soc., 1990, vol. 73 (1), p. 97.10.1111/j.1151-2916.1990.tb05097.x ↗
17. D. Muscat, R.L. Harris, and R.A.L. Drew: Acta Metall. Mater., 1994, vol. 42 (12), p. 4155.10.1016/0956-7151(94)90192-9 ↗
18. C. Garcia-Cordavilla, E. Louis, and J. Narcisco: Acta Metall. Mater., 1999, vol. 47 (18), p. 4461.10.1016/S1359-6454(99)00318-3 ↗
19. B.S.S. Daniel, D. Mazumdar, and V.S.R. Murthy: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2951–58.10.1007/s11661-999-0132-7 ↗
20. E. Saiz, S. Foppiano, W.M. Chan, and A.P. Tomsia: Composites, 1999, vol. 30, p. 399.10.1016/S1359-835X(98)00126-2 ↗
21. J. Szekely and J.W. Evans: Chem. Eng. Sci., 1970, vol. 25, p. 109.10.1016/0009-2509(70)85026-6 ↗
22. S. Yagi and D. Kuni: Chem. Eng. Sci., 1961, vol. 16, p. 372.10.1016/0009-2509(61)80044-4 ↗
23. V.G. Levich: Physicochemical Hydrodynamics, Prentice-Hall, New York, NY, 1977.
24. M.G. Nichols and S.D. Peteves: Scripta Mater., 1994, vol. 31 (8), p. 1091.10.1016/0956-716X(94)90532-0 ↗
25. J.C. Ambrose, M.G. Nicholas, and A.M. Stoneham: Acta Metall. Mater., 1992, vol. 40, p. 2483.10.1016/0956-7151(92)90317-8 ↗
26. M.G. Nichols and S.D. Peteves: in High Temperature Capillarity 94, N. Eustathopoulos, ed., Slovak Acad. Sci., Slovakia, 1994, p. 18.
27. N. Grigorenko, V. Poluyanskaya, N. Eustathopoulos, and Y.V. Naidich: in High Temperature Capillarity 97 (HTC-97), N. Eustathopoulos and N. Sobczak, eds., Foundry Research Institute, Krakow, Poland, 1997, p. 27.
28. V.N. Ermenko, L.I. Kostrova, and N.D. Lesnik: in High-Temperature Capillarity 94, N. Eustathopoulos, ed., Slovak Academy of Science, Slovakia, 1994, p. 113.
29. P. Joos, P. Van Remoortere, and M. Bracke: J. Coll. Interface Sci., 1990, vol. 136 (1), p. 189.10.1016/0021-9797(90)90089-7 ↗
30. P. Van Remoortere and P. Joos: J. Coll. Interface Sci., 1993, vol. 160, p. 387.10.1006/jcis.1993.1410 ↗
31. G.L. Batten, Jr.: J. Coll. Interface Sci., 1984, vol. 102 (2), p. 513.10.1016/0021-9797(84)90254-6 ↗
32. R. Asthana: Scripta Mater., 1998, vol. 38 (8), p. 1203.10.1016/S1359-6462(98)00034-7 ↗
33. R. Asthana: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1307–10.10.1007/BF02670625 ↗
34. R. Asthana, J. Coll. Interface Sci., 2000, vol. 231, p. 398.10.1006/jcis.2000.7143 ↗
35. J.G. Li and H. Hausner: Scripta Metall. Mater., 1995, vol. 32 (3), p. 377.10.1016/S0956-716X(99)80068-5 ↗
36. E. Saiz and A.P. Tomsia: J. Am. Ceram. Soc., 1998, vol. 81 (9), p. 2381.10.1111/j.1151-2916.1998.tb02634.x ↗
37. A.P. Tomsia and J.A. Pask: in Ceram. Eng. Sci. Proc., 1989, vol. 10 (11–12), p. 1631.10.1002/9780470312568.ch11 ↗
38. T.J. Whelan and A.T. Anderson: J. Am. Ceram. Soc., 1975, vol. 58 (9), p. 396.10.1111/j.1151-2916.1975.tb19006.x ↗
39. L. Battezatti and A.L. Greer: Acta Metall. Mater., 1989, vol. 37, p. 1791.10.1016/0001-6160(89)90064-3 ↗
40. B.J. Keene: Int. Mater. Rev., 1993, vol. 38, p. 157.10.1179/imr.1993.38.4.157 ↗
41. L.E. Murr: Interfacial Phenomena in Metals and Alloys, Addison-Wesley, Reading, MA, 1975.
42. Smithells Metals Reference Book, 6th ed., E.A. Brandes, ed., Butterworth and Co., London.
43. X.B. Zhou and J.T.M. Hosson: Acta Mater., 1996, vol. 44 (2), p. 421.10.1016/1359-6454(95)00235-9 ↗
44. CRC Handbook of Physics and Chemistry, 66th ed., R.C. Weast, ed., CRC Press, Boca Raton, FL, 1985.
45. M. Denesuk, G.L. Smith, B.J.J. Zelinski, N.J. Kreidl, and D.R. Uhlmann: J. Coll. Interface Sci., 1993, vol. 158, p. 114.10.1006/jcis.1993.1235 ↗
46. A.P. Tomsia, E. Saiz, S. Foppiano, and R.M. Cannon: Proc. Int. Conf. High-Temperature Capillarity, June 29–July 2, 1997, Cracow, Poland, N. Eustathopoulos and N. Sobczak, eds., Foundry Research Institute, Cracow, Poland.
47. P.G. DeGennes: Rev. Mod. Phys., 1985, vol. 57, p. 827.10.1103/RevModPhys.57.827 ↗
48. N. Sobczak: in Interfacial Science in Ceramic Joining, A. Bellosi, T. Kosmac, and A.P. Tomsia, eds., ATO ASI Series, High Technology, Kluwer, The Netherlands, 1997, vol. 58, p. 27.
49. R. Asthana and N. Sobczak: JOM-e, 2000, vol. 52 (1).
50. A. Mortensen, F. Hodaj, and N. Eustathopoulos: Scripta Mater., 1998, vol. 38 (9), p. 1411.10.1016/S1359-6462(98)00055-4 ↗
51. N. Eustathopoulos: Acta Mater., 1998, vol. 46 (7), p. 2319.10.1016/S1359-6454(97)00388-1 ↗
52. R. Asthana: J. Coll. Interface Sci., 1993, vol. 158, p. 146.10.1006/jcis.1993.1240 ↗
53. R. Asthana and S.K. Pabi: Mater. Sci. Eng., 1990, vol. A128, p. 253.10.1016/0921-5093(90)90233-S ↗
54. T. Hirata and M. Ishihara: Int. J. Heat Mass Transfer, 1985, vol. 28 (2), p. 331.10.1016/0017-9310(85)90066-3 ↗
55. R. Asthana: Metall. Mater. Trans. A, 2001, vol. 32A, p. 2663.10.1007/s11661-001-0057-2 ↗