journal article·2010-05

Precipitation Behavior of Fe-25 At. Pct Co-9 At. Pct Mo Investigated by In-Situ Small-Angle Neutron Scattering and Complementary Methods

E. Eidenberger, M. Schober, E. Stergar, H. Leitner, P. Staron, H. Clemens

Publisher page

Abstract

The precipitation behavior of a nanoscaled intermetallic phase in a martensitic Fe-25 at. pct Co-9 at. pct Mo alloy was investigated by in-situ small-angle neutron scattering (SANS). Solution-annealed samples were heated to 700 °C using different heating rates while successively measuring the scattered intensity. The ratio R of nuclear and magnetic scattering intensity, sensitive to change in the chemical composition of the developing precipitates, was analyzed. Differential scanning calorimetry (DSC) was performed using identical heating rates to gain knowledge of the kinetics of the precipitation reaction. Complementarily, three-dimensional atom probe (3DAP) measurements were conducted to characterize the chemical composition of the precipitates. A good correlation of the evolution of R and the peaks occurring in the DSC curves was found. The onset temperature of the precipitation reaction was determined to be 420 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. W. Köster and W. Tonn: Arch. Eisenhüttenwes., 1932, vol. 12, pp. 627–30.10.1002/srin.193200305 ↗
2. Y. Geller: Instrumentalniye Staly, Verlag Metallurgia, Moskau, 1983, pp. 500–12.
3. M.I. Karpov: Proc. PM World Congr., EPMA, Granada, Spain, 1998, pp. 519–24.
4. E. Houdremont: Handbuch der Sonderstahlkunde, Verlag Stahleisen, Düsseldorf, 1956, vol. 2, pp. 911–13.10.1007/978-3-662-11973-0 ↗
5. M. Hansen: Constitution of Binary Alloys, McGraw-Hill, New York, NY, 1958, pp. 668–70.
6. H. Danninger, F. Rouzbahani, C. Harold, H. Ponemayr, M. Daxelmüller, F. Simancik, and K. Izdinsky: Powder Metall. Progr., 2005, vol. 5 (2), pp. 92–103.
7. H. Leitner, M. Schober, H. Clemens, D. Caliskanoglu, and F. Danoix: Int. J. Mater. Res., 2008, vol. 99 (4), pp. 367–74.10.3139/146.101647 ↗
8. E. Eidenberger, E. Stergar, H. Leitner, C. Scheu, P. Staron, and H. Clemens: BHM, 2008, vol. 153 (7), pp. 247–52.
9. P. Staron, B. Jamnig, H. Leitner, R. Ebner, H. Clemens: J. Appl. Cryst., 2003, vol. 36, pp. 415–19.10.1107/S0021889803000293 ↗
10. G. Kostorz: in Treatise on Materials Science and Technology, vol. 15, Neutron Scattering, G. Kostorz and H. Herman, eds., Academic Press, New York, NY, 1979, pp. 226–88.
11. M.K. Miller, A. Cerezo, M.G. Hetherington, and G.D.W. Smith: Atom Probe Field Ion Microscopy, Clarendon Press, Oxford, United Kingdom, 1996, pp. 476–81.10.1093/oso/9780198513872.005.0001 ↗
12. Imago Scientific Instruments Visualization and Analysis Software (IVAS), www.imago.com.
13. PoSAP Analysis Software, Oxford nanoScience Ltd., www.imago.com.
14. A. Cerezo and L. Davin: Surf. Interface Anal., 2007, vol. 39, pp. 184–88.10.1002/sia.2486 ↗
15. D. Vaumousse, A. Cerezo, and P.J. Warren: Ultramicroscopy, 2003, vol. 95, pp. 215–21.10.1016/S0304-3991(02)00319-4 ↗
16. O.C. Hellman, J. Blatz du Rivage, and D.N. Seidman: Ultramicroscopy, 2003, vol. 95, pp. 199–205.10.1016/S0304-3991(02)00317-0 ↗
17. T. Miyazaki, S. Takagishi, H. Mori, and T. Kozakai: Acta Metall., 1980, vol. 28, pp. 1143–53.10.1016/0001-6160(80)90097-8 ↗