Optimizing the Diffusion Welding Process for Alloy 800H: Thermodynamic, Diffusion Modeling, and Experimental Work
Source abstract
Abstract
A research effort was made to evaluate the usefulness of modern thermodynamic and diffusion computational tools, Thermo-Calc and Dictra (Thermo_Calc Software, Inc., McMurray, PA), in optimizing the parameters for diffusion welding of Alloy 800H. This would achieve a substantial reduction in the overall number of experiments required to achieve optimal welding and post-weld heat treatment conditions. This problem is important because diffusion-welded components of Alloy 800H are being evaluated for use in assembling compact, micro-channel heat exchangers that are being proposed in the design of a high-temperature, gas-cooled reactor by the U.S. Department of Energy. The modeling was done in close contact with experimental work. The latter included using the Gleeble 3500 System (Dynamic Systems, Inc., Poestenkill, NY) for welding simulation, mechanical property measurement, and light optical and scanning electron microscopy. The modeling efforts suggested a temperature of 1423 K (1150 °C) for 1 hour with an applied pressure of 5 MPa using a 15-μm Ni foil as joint filler to reduce chromium oxidation on the welded surfaces. Good agreement between modeled and experimentally determined concentration gradients was achieved, and model refinements to account for the complexity of actual alloy materials are suggested.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Iron and Steelmaking Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. J.N. Dupont, J.C. Lippold, and S.D. Kiser: Welding Metallurgy and Weldability of Nickel-Based Alloys, Wiley, Hoboken, NJ, 2009.10.1002/9780470500262 ↗
2. M.J. Donachie and S.J. Donachie: Superalloys – A Technical Guide, 2nd ed., ASM International, Materials Park, OH, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
3. M.G. Nicholas: Joining Processes – Introduction to Brazing and Diffusion Bonding, Kluwer Academic Publishers, Dordrecht, Germany, 1998.
4. C.F.J. Wu and M.S. Hamada: Experiments: Planning, Analysis, and Optimization, Wiley, Hoboken, NJ, 2009.
5. N. Saunders and A.P. Miodownik: CALPHAD (Calculation of Phase Diagrams): A Comprehensive Guide, Pergamon, New York, NY, 1998.
6. M. Hillert: Phase Equilibria, Phase Diagrams, and Phase Transformations, Cambridge University Press, Cambridge, UK, 2007.10.1017/CBO9780511812781 ↗
7. Z.K. Liu: JOM, 2009, vol. 19, pp. 18–20.10.1007/s11837-009-0143-2 ↗
8. C.E. Campbell, W.J. Boettinger, and U.R. Kattner: Acta Mater., 2002, vol. 50, pp. 775–92.10.1016/S1359-6454(01)00383-4 ↗
9. Z.K. Liu and L.Q. Chen: Applied Computational Materials Modeling: Theory, Experiment, and Simulations, G. Bozzolo, ed., Springer, New York, NY, 2006.
10. J.W. Yoon, F. Barlat, H. Weiland, M.V. Glazoff, and R.E. Dick: State of the Art For Crystal Plasticity Based Modeling, Alcoa Technical Report # 07-201, 2007.
11. M.V. Glazoff, S.N. Rashkeev, Y.P. Pyt’ev, J.W. Yoon, and S. Sheu: Appl. Phys. Lett. 2009, vol. 95, p. 084106.10.1063/1.3213391 ↗
12. ASTM B 408-06, Standard Specification of Nickel-Iron-Chromium Alloy Rod and Bar, ASTM International, West Conshohocken, PA.
13. Thermo-Calc Classic Version S User’s Guide, P. Shi and B. Sundman, eds., ThermoCalc Software AB, Stockholm, Sweden, 2010.
14. DICTRA version 25 User’s Guide. Thermo-Calc Software AB, Stockholm, Sweden, 2010.
15. A. Borgenstam, A. Engstrom, L. Hoglund, and J Agren: J. Phase Equilib., 2000, vol. 21, no. 3, pp. 269–80.10.1361/105497100770340057 ↗
16. A.A. Tavasoli and G. Colombe: Metall. Trans. A, 1978, vol. 9A, pp. 1203–11.10.1007/BF02652243 ↗
17. X. Wang, E. Brunger, and G. Gottstein: Mater. Sci. Eng. A, 2000, vol. A290, pp. 180–85.10.1016/S0921-5093(00)00915-1 ↗
18. A. Czyrska-Filemonowicz and K. Spiradek: Z. Werkstofftechnik, 1983, vol. 14, pp. 417–21.10.1002/mawe.19830141208 ↗
19. J.E. Morral, C. Jin, A. Engstrom, and J. Agren: Scripta Mater., 1996, vol. 34, no. 11, pp. 1661–66.10.1016/1359-6462(96)00038-3 ↗
20. W.D. Hopfe and J.E. Morral: Acta Metall. Mater., 1994, vol. 42, no. 11, pp. 3887–94.10.1016/0956-7151(94)90454-5 ↗