journal article·2002-08

Massive transformation and absolute stability

Milton Lima, Wilfried Kurz

Publisher page

Abstract

Under carefully chosen conditions, solidification theory may be applied to solid-state transformations, and this has been done here for composition-invariant diffusion transformations. The predictions of the modeling are compared with isovelocity experiments in two iron systems, Fe-7.29 wt pct Cr and Fe-3.1 wt pct Ni. The ferrite to austenite phase transformation is used to demonstrate that stabilization of a planar transformation front at absolute stability is the natural lower velocity limit for a composition-invariant (massive) transformation. The results of the model, which includes nonequilibrium effects, clearly show that steady-state plane-front growth leading to composition invariance can be obtained at various temperatures depending on the growth velocity. In the lower velocity range, at the limit of absolute stability (of the order of 10 µm/s in the systems studied), the transformation interface moves under conditions of local equilibrium, and the temperature corresponds to the lower solvus temperature. At higher velocity (of the order of the interface diffusion rate, which in these systems is of the order of cm/s), the transformation is predicted to proceed at temperatures close to T0. At even higher rates, atom attachment kinetic undercooling will decrease the transformation temperature with respect to T0. In some cases, this temperature might even drop below the lower solvus.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. T.B. Massalski, J.H. Perepezko, and J. Jaklovsky: Mater. Sci. Eng., 1975, vol. 18, p. 193.10.1016/0025-5416(75)90169-X ↗
2. J.H. Perepezko: Metall. Trans. A, 1984, vol. 15A, p. 437.10.1007/BF02644967 ↗
3. J.H. Perepezko and T.B. Massalki: Acta Metall., 1975, vol. 23, p. 621.10.1016/0001-6160(75)90103-0 ↗
4. M. Hillert: Metall. Trans. A, 1984, vol. 15A, p. 411.10.1007/BF02644964 ↗
5. M. Hillert and M. Schalin: Acta Mater., 2000, vol. 48, p. 461.10.1016/S1359-6454(99)00361-4 ↗
6. A. Borgenstam and M. Hillert: Acta Mater., 2000, vol. 48, p. 2765.10.1016/S1359-6454(00)00102-6 ↗
7. M. Hillert: in The Mechanism of Phase Transformations in Crystalline Solids, Institute of Metals Monograph No. 33, Institute of Metals, London, 1969, p. 231.
8. W. Kurz and M. Lima: Proc. Int. Conf. Solid-Solid Phase Transformations, The Japan Institute of Metals, Kyoto, Japan, 1999, p. 1581.
9. R. Trivedi and W. Kurz: Int. Mater. Rev., 1994, vol. 39, p. 49.10.1179/imr.1994.39.2.49 ↗
10. P. Gilgien and W. Kurz: Mater. Sci. Eng., 1994, vol. A178, p. 199.10.1016/0921-5093(94)90543-6 ↗
11. W.A. Tiller, K.A. Jackson, J.W. Rutter, and B. Chalmers: Acta Metall., 1953, vol. 1, p. 428.10.1016/0001-6160(53)90126-6 ↗
12. W.J. Boettinger and S.R. Coriell: Science and Technology of the Undercooled Melt, NATO ASI Series 114, P.R. Sahm, H. Jones, and C.M. Adams, eds., NATO, Dordrecht, Netherlands, 1986, p. 81.10.1007/978-94-009-4456-5_5 ↗
13. M.J. Aziz: J. Appl. Phys., 1982, vol. 53, p. 1158.10.1063/1.329867 ↗
14. M.J. Aziz and T. Kaplan: Acta Metall., 1988, vol. 36, p. 2335.10.1016/0001-6160(88)90333-1 ↗
15. M.J. Aziz: Metall. Mater. Trans. A, 1996, vol. 27A, p. 671.10.1007/BF02648954 ↗
16. W. Kurz, B. Giovanola, and R. Trivedi: Acta Metall. Mater., 1986, vol. 34, p. 823.10.1016/0001-6160(86)90056-8 ↗
17. W Kurz and D.J. Fisher: Fundamentals of Solidification, 4th ed., Trans Tech Publications, Aedermannsdorf, Switzerland, 1998, p. 247.
18. W.W. Mullins and R.F. Sekerka: J. Appl. Phys., 1989, vol. 35, p. 444.10.1063/1.1713333 ↗
19. D.A. Huntley and S.H. Davis: Acta Metall. Mater., 1993, vol. 41, p. 2025.10.1016/0956-7151(93)90373-Z ↗
20. M. Carrard, M. Gremaud, M. Zimmermann, and W. Kurz: Acta Metall. Mater., 1992, vol. 40, p. 983.10.1016/0956-7151(92)90076-Q ↗
21. W. Kurz and R. Trivedi: Metall. Mater. Trans. A, 1996, vol. 27A, p. 625.10.1007/BF02648951 ↗
22. D. Turnbull: J. Phys. Chem., 1962, vol. 66, p. 609.10.1021/j100810a009 ↗
23. M. Vandyoussefi, H.W. Kerr, and W. Kurz: Acta Mater., 1997, vol. 45, p. 4093.10.1016/S1359-6454(97)00086-4 ↗
24. M. Sumida and W. Kurz: EPFL, Lausanne, unpublished research 2001.