In -Situ Annealing of Severe Plastic-Deformed OFHC Copper
Source abstract
Abstract
A pure OFHC copper is subjected to severe plastic deformation (SPD) by a well defined high pressure torsion process at ambient temperature. The change in microstructure of samples deformed to different strains, up to ε=64, is investigated in-situ, during annealing at 170°C, within a scanning electron microscope. The spatial distribution of nucleation sites changes significantly with increasing strain from nucleation at triple junctions and grain boundaries to a random distribution of sites for von Mises equivalent strains beyond ε=4. The resulting mean size of recrystallized grains is about 6.75 times larger than the mean microstructural size of the corresponding as-deformed state. For strains larger than ε=16 the recrystallized microstructure appears to be independent of preceding strain. A detailed investigation of the nucleation of recrystallized grains following very large strains shows that certain microstructural elements are favoured as nuclei and were particularly taken into account.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. D.H. Shin, B.D. Ahn, and H.S. Cho: in Ultrafine Grained Materials III, D.H. Shin and T.C. Lowe, eds., 2004, pp. 421–26
2. N. Tsuji, Y. Ito, Y. Saito: Scripta Mater., 2002, vol. 47, p. 89310.1016/S1359-6462(02)00282-8 ↗
3. R.Z. Valiev, R.K. Islamgaliev, I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, p. 10310.1016/S0079-6425(99)00007-9 ↗
4. D.H. Shin, J.J. Pak, Y.K. Kim: Mater. Sci. Eng., 2002, vol. 323, p. 40910.1016/S0921-5093(01)01395-8 ↗
5. A. Vorhauer, S. Kleber, and R. Pippan: in Ultrafine Grained Materials III, TMS, Charlotte, 2004, p. 629
6. R.Z. Valiev: Adv. Eng. Mater., 2003, vol. 5 (5), p. 29610.1002/adem.200310089 ↗
7. A. Vorhauer, C. Rumpf, P. Granitzer, S. Kleber, H. Krenn, R. Pippan: Mater. Sci. Forum, 2006, vols. 503–504, pp. 299–30410.4028/www.scientific.net/MSF.503-504.299 ↗
8. H. Gleiter: Acta Mater, 2000, vol. (48), p. 110.1016/S1359-6454(99)00285-2 ↗
9. F.J. Humphreys and M. Harterl: Recrystallization and Related Annealing Phenomena, Oxford, Pergamon Press, 1996, pp. 127–39210.1016/B978-0-08-041884-1.50012-X ↗
10. F.J. Humphreys, P.B. Prangnell, J.R. Bowen: Phil. Trans. R. Soc. London A, 1999, vol. 357, p. 166310.1098/rsta.1999.0395 ↗
11. Y. Iwahashi, Z. Horita, M. Nemoto: Acta Mater., 1998, vol. 46 (9), p. 331710.1016/S1359-6454(97)00494-1 ↗
12. B.Q. Han, S. Yue: Mater. Processing Technol., 2003, vol. 136, p. 10010.1016/S0924-0136(02)01014-2 ↗
13. S.H. Lee, T. Sakai, D.H. Shin: Mater. Trans., 2003, vol. 44 (7), p. 1392
14. A. Vorhauer, R. Pippan: Scripta Mater., 2004, vol. 51, pp. 921–2510.1016/j.scriptamat.2004.04.025 ↗
15. J.E. Bailey, P.B. Hirsch: Proc. R. Soc. A, 1962, vol. 267, p. 1110.1098/rspa.1962.0080 ↗
16. J.E. Bellier, R.D. Doherty: Acta Metall., 1977, vol. 25, p. 52110.1016/0001-6160(77)90192-4 ↗
17. O. Engler: Metall. Mater. Trans. A, 1999, vol. 30A, p. 151710.1007/s11661-999-0088-7 ↗
18. O. Engler: Acta Mater., 2002, vol. 49, p. 123710.1016/S1359-6454(01)00017-9 ↗
19. H.P. Stüwe: Adv. Eng. Mater., 2003, vol. 5, p. 29110.1002/adem.200310085 ↗
20. A. Vorhauer, R. Pippan: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 417–2910.1007/s11661-007-9413-1 ↗
21. V. Randel, O. Engler: Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping, Gordon and Breach Science Publishers, Amsterdam, 200010.1201/9781482287479 ↗
22. B.L. Adams, S.I. Wright, K. Kunze: Metall. Mater. Trans. A, 1993, vol. 24A, p. 81910.1007/BF02656503 ↗
23. Y. Hunag, F.J. Humphreys, N. Ferry: Acta Mater., 2002, vol. 48, p. 254310.1016/S1359-6454(00)00068-9 ↗
24. N.E. Hamilton: Ph.D. Thesis, University of New South Wales, 2003
25. F.J. Humphreys: J. Mater. Sci., 2001, vol. 36, p. 383310.1023/A:1017973432592 ↗
26. T. Hebesberger, R. Pippan, and H.P. Stüwe: in Ultrafine Grained Materials II, R.S. Mishra Y.T. Zhu, and T.G. Langdon, eds., TMS, Seattle, 2002
27. T. Hebesberger, H.P. Stüwe, A. Vorhauer: Acta Mater., 2005, vol. 53, p. 39310.1016/j.actamat.2004.09.043 ↗
28. F.J. Humphreys: Acta Mater., 1997, vol. 45, pp. 4231–4010.1016/S1359-6454(97)00070-0 ↗
29. F.J. Humphreys and M. Harterly: Recrystallization and Related Phenomena, Pergamon Press, Oxford, 200310.1016/B978-008044164-1/50016-5 ↗
30. P. Gerber, J. Tarasiuk, T. Chauveau: Acta Mater., 2003, vol. 51, p. 635910.1016/j.actamat.2003.08.039 ↗
31. D.A. Hughes, N. Hansen: Acta Metall., 1997, vol. 45, p. 3871
32. D.A. Hughes, N. Hansen: Scripta Metall. Mater., 1995, vol. 33, p. 31510.1016/0956-716X(95)00143-J ↗
33. D.A. Hughes, N. Hansen: Scripta Mater., 2003, vol. 48, pp. 147–5310.1016/S1359-6462(02)00358-5 ↗
34. A. Belyakov, T. Sakai, H. Miura: ISIJ, 1999, vol. 39, p. 59210.2355/isijinternational.39.592 ↗
35. A. Belyakov, T. Sakai, H. Miura: Acta Mater., 2002, vol. 50, p. 154710.1016/S1359-6454(02)00013-7 ↗
36. M.E. Kassner, H.J. McQueen, E. Evangelista: Mater. Sci. Forum, 1993, vols. 113–115, p. 15110.4028/www.scientific.net/MSF.113-115.151 ↗
37. N. Tsuji, R. Ueji, and Y. Ito: Proc. 21st Riso Int. Symp. on Materials Science, Riso National Laboratory, Roskilde, Denmark, 2000, p. 105
38. M.R. Druby, F.J. Humphreys: Acta Metall., 1986, vol. 34, p. 225910.1016/0001-6160(86)90171-9 ↗
39. P. Cizek, B.P. Wynne: Mater. Sci. Eng. A, 1997, vol. 230, p. 8810.1016/S0921-5093(97)00087-7 ↗
40. P.A. Beck, P.R. Sperry: J. Appl. Phys., 1950, vol. 21, p. 15010.1063/1.1699614 ↗
41. P. Bate, B. Hutchinson: Scripta Mater., 1997, vol. 36, p. 19510.1016/S1359-6462(96)00361-2 ↗
42. M.C. Theyssier, J.H. Driver: Mater. Sci. Eng. A, 1999, vol. 272, pp. 73–8210.1016/S0921-5093(99)00469-4 ↗
43. “Datasheet: OFHC Maximum Content of Impurities,” Technical Report, Buntmetall Amstetten GmbH, Austria, 2005