journal article·2019-03-15

Investigation on Interface Morphology and Mechanical Properties of Three-Layer Laser Impact Welding of Cu/Al/Cu

Huixia Liu, Hao Jin, Meng Shao, Heng Tang, Xiao Wang

Publisher page

Abstract

In this study, laser impact welding technology was applied to fabricate a three-layer Cu/Al/Cu joint. A series of experiments were carried out to investigate the interface morphology and mechanical properties of the welding samples. Results revealed that different morphologies were generated at the upper and lower interfaces. The lower interface morphology transformed from straight to wavy as the collision point moved outward from the center along the radius. With the increase of laser pulse energy, the areas of upper and lower bonding regions expanded. When the laser energy was small, intermetallics and melting zones were absent and slight element diffusion occurred near the upper and lower interfaces. Melting zones occurred at the welding interface when the laser energy increased. Quantitative analysis by energy dispersive spectroscopy found that Al/Cu intermetallics may be produced in the melting region. Nanoindentation hardness test indicated that as the distance from the upper and lower interfaces decreased, the hardness of flyer plate and base plate increased. Two failure modes, that is, fracture failure at the upper and lower bonding interfaces, were observed under different laser energies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. X. Li, H. Ma and Z. Shen: Mater. Des., 2015, vol. 87, pp. 815-824.10.1016/j.matdes.2015.08.085 ↗
2. I.K. Kim and S.I. Hong: Mater. Des., 2013, vol. 47, pp. 590-598.10.1016/j.matdes.2012.12.070 ↗
3. L.Y. Sheng, F. Yang, T.F. Xi, C. Lai and H.Q. Ye: Compos. Part B, 2011, vol. 42, pp. 1468-1473.10.1016/j.compositesb.2011.04.045 ↗
4. T.A. Mai and A.C. Spowage: Mater. Sci. Eng. A, 2004, vol. 374, pp. 224-233.10.1016/j.msea.2004.02.025 ↗
5. H.C Tseng, C. Hung and C.C. Huang: Int. J. Adv. Manuf. Technol., 2010, vol. 49, pp. 1029-1036.10.1007/s00170-009-2446-4 ↗
6. B. Wang, W. Chen, J. Li, Z. Liu and X. Zhu: Mater. Des., 2013, vol. 47, pp. 74-79.10.1016/j.matdes.2012.12.046 ↗
7. F. Findik: Mater. Des., 2011, vol. 32, pp. 1081-1093.10.1016/j.matdes.2010.10.017 ↗
8. B. Gulenc: Mater. Des. 2008, vol. 29, pp. 275-278.10.1016/j.matdes.2006.11.001 ↗
9. F. Foadian, M. Soltanieh, M. Adeli and M. Etminanbakhsh: Metall. Mater. Trans. A, 2014, vol. 45, pp. 1823-1832.10.1007/s11661-013-2144-6 ↗
10. X. Wu and J. Shang: J. Manuf. Sci. Eng., 2014, vol. 136, https://doi.org/10.1115/1.4027917.10.1115/1.4027917 ↗
11. R.N. Raoelisona, T. Sapanathana, N. Buirona and M. Rachik: J. Manuf. Process., 2015, vol. 46A, pp. 112-127.10.1016/j.jmapro.2015.09.003 ↗
12. [Y. Zhang, S.S. Babu, C. Prothe, M. Blakely, J. Kwasegroch, M. LaHa and G. S. Daehna: J. Mater. Process. Technol., 2011, vol. 211, pp. 944-952.10.1016/j.jmatprotec.2010.01.001 ↗
13. G.S Daehn and J.C Lippold. (U.S. Patent PCT/US09/36299), Accessed 6 Jan 2011.
14. X. Wang, C. Gu, Y. Zheng, Z. Shen and H. Liu: Mater. Des., 2014, vol. 56, pp. 26-30.10.1016/j.matdes.2013.10.091 ↗
15. H. Wang, A. Vivek, Y. Wang, G. Taber and G.S. Daehn: J. Laser Appl., 2016, vol. 28, https://doi.org/10.2351/1.4946887..10.2351/1.4946887 ↗
16. X. Wang, Y. Gu, T. Qiu, Y. Ma, D. Zhang and H. Liu: Mater. Des. 2015, vol. 65, pp. 1143-1152.10.1016/j.matdes.2014.08.044 ↗
17. H. Liu, S. Gao, Z. Yan, L. Li, C. Li, X. Sun, C. Sha, Z. Shen, Y. Ma and X. Wang: Metals-Open Access Metall. J., 2016, vol. 6, https://doi.org/10.3390/met6080179.10.3390/met6080179 ↗
18. X. Wang, Y. Luo, T. Huang and H. Liu: Materials (Basel), 2017, vol. 10 https://doi.org/10.3390/ma1005052310.3390/ma10050523 ↗
19. X. Wang, T. Huang, Y. Luo and H. Liu: Materials (Basel), 2017, vol. 10 https://doi.org/10.3390/ma1009107010.3390/ma10091070 ↗
20. L. Han, A. Chrysanthou and K.W. Young: Mater. Des., 2007, vol. 28, pp. 2024-2033.10.1016/j.matdes.2006.06.015 ↗
21. J. Shen, Y. Zhang, X. Lai and P.C Wang: Mater. Des., 2011, vol. 32, pp. 550-560.10.1016/j.matdes.2010.08.023 ↗
22. C.V. Nielsen, K.S. Friis, W. Zhang and N. Bay: Weld. J., 2011, vol. 90, pp. 32s-40s.
23. H. Wang, G. Taber, D. Liu, S. Hansen, E. Chowhury, S. Terry, J. Lippolda and G. Daehnb: J. Manufa. Process., 2015, vol. 19, pp. 118-124.10.1016/j.jmapro.2015.05.007 ↗
24. H. Liu, Z. Shen, X. Wang, H. Wang and M. Tao: Int. J. Mach. Tool. Manuf., 2010, vol. 50, pp. 491-494.10.1016/j.ijmachtools.2010.02.003 ↗
25. X. Guo, Y. Ma, K. Jin, H. Wang, J. Tao and M. Fan: J. Mater. Eng. Perform., 2017, vol. 26, pp. 4235-4244.10.1007/s11665-017-2890-5 ↗
26. D.M. Fronczek, R. Chulist, L. Litynska-Dobrzynska, G. Lopez, A. Wierzbicka-Miernik, N. Schell, Z. Szulc and J. Wojewoda-Budka: Metall. Mater. Trans. A, 2017, vol. 48, pp. 1-12.
27. S. Saravanan, K. Raghukandan and K. Hokamoto: Arch. Civil Mech. Eng., 2016, vol. 16, pp.563-568.10.1016/j.acme.2016.03.009 ↗
28. M.M. Hoseini Athar and B. Tolaminejad: Mater. Des., 2015, vol. 86, pp. 516-525.10.1016/j.matdes.2015.07.114 ↗
29. M. Honarpisheh, J. Niksokhan and F. Nazari: Metall. Res. Tech., 2016, vol. 113 https://doi.org/10.1051/metal/201504910.1051/metal/2015049 ↗
30. F. Grignon, D.J. Benson, K.S. Vecchio and M.A. Meyers: Int. J. Impact Eng., 2004, vol. 30, pp. 1333-1351.10.1016/j.ijimpeng.2003.09.049 ↗
31. N. Kahraman, B. Gulenc and F. Findik: Int. J. Impact Eng., 2007, vol. 34, pp. 1423-1432.10.1016/j.ijimpeng.2006.08.003 ↗
32. A. Vivek, S. Hansen, J. Benzing, M. He, and G. Daehn: Metall. Mater. Trans. A, 2015, vol. 46, pp. 4548-4558.10.1007/s11661-014-2404-0 ↗
33. X. Wang, H. Zhang, Z. Shen, J. Li, Q. Qian and H. Liu: Opt. Laser. Eng. 2016, vol. 86, pp. 291-302.10.1016/j.optlaseng.2016.06.018 ↗
34. H. Paul, Lidia Lityńska-Dobrzyńska, Mariusz Prażmowski: Metall. Mater. Trans. A, 2013, vol. 44, pp. 3836-3851.10.1007/s11661-013-1703-1 ↗
35. I.V. Oliveira, A.J. Cavaleiro, G.A. Taber and A. Reis, Magnetic Pulse Welding of Dissimilar Materials. 2017, pp. 419-431. https://doi.org/10.1007/978-3-319-50784-2_31.10.1007/978-3-319-50784-2_31 ↗
36. V.I. Lysak and S.V. Kuzmin: J. Mater. Process. Technol., 2015, vol. 222, pp. 356-364.10.1016/j.jmatprotec.2015.03.024 ↗
37. W.X. Wang, X. Cao, N. Zhang and J. Wu: Mater. Des. 2015, vol. 65, pp. 1100-1109.10.1016/j.matdes.2014.08.025 ↗
38. M. Honarpisheh, M. Asemabadi and M. Sedighi: Mater. Des., 2012, vol. 37, pp. 122-127.10.1016/j.matdes.2011.12.045 ↗
39. M.A. Habib, H. Keno and R. Uchida: J. Mater. Process. Technol., 2015, vol. 217, pp. 310-316.10.1016/j.jmatprotec.2014.11.032 ↗