Analysis of intergranular impurity concentration and the effects on the ductility of copper-shaped charge jets
Source abstract
Abstract
Shaped charge liners (SCLs) are thin-walled metallic cones that are explosively driven to high pressures and strain rates. From a metallurgical point of view, the SCLs provide an excellent experimental test bed to evaluate the influence of microstructure on high strain rate deformation and failure. In this work, a geometrical analysis based on an assumed tetrakaidecahedron grain shape is applied to determine the relationship between grain size, overall impurity content, and ductility of the liners. The measured parameter for ductility in this case is the break-up time for sulfur-doped, oxygen-free electronic (ofe) copper SCLs after they are explosively driven. The calculations determine the number of impurity atoms as a function of grain size, the number of available sites at the intercrystalline defects, and the intercrystalline impurity concentration. Recent experiments have shown that larger grain size liners with low impurity contents exhibit better ductility than smaller grain size liners with higher impurity concentrations, which is contrary to conventional wisdom that the liner ductility scales directly with grain size or impurity content alone. Within the range of grain sizes and bulk impurity contents in this study, the analysis suggests that the quadruple nodes and triple lines are saturated with impurities. Over this same range of impurities and grain sizes, only a fraction of a monolayer of impurities exists at the grain boundaries if all boundaries are assumed to be equally susceptible to sulfur segregation. Modification of the analysis by assuming partitioning of the sulfur only to crystallographically random boundaries, however, suggests that there is a correlation between the jet break-up time and the transition to complete monolayer coverage of such boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Ion-surface interactions and analysis · Laser-Plasma Interactions and Diagnostics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. W.P. Walters and J.A. Zukas: Fundamentals of Shaped Charges, John Wiley & Sons, New York, NY, 1989.
2. M.L. Duffy and S.T. Golaski: U.S. Army Ballistic Research Laboratory Technical Report No. BRL-TR-2800, 1987.
3. D.K. Chan, D.H. Lassila, W.E. King, and E.L. Baker: Mater. Res. Soc. Symp. Proc., 1996, vol. 409, p. 195.10.1557/PROC-409-195 ↗
4. D.H. Lassila, E.L. Baker, D.K. Chan, W.E. King, and A.J. Schwartz: Proc. 16th Int. Ballistics Symp., 1996, p. 31.
5. A. Lichtenberger: Proc. 11th Int. Ballistics Symp., 1989, p. 5.
6. A. Lichtenberger: Proc. 13th Int. Ballistics Symp., 1992, p. 337.
7. T.G. Nieh and W.D. Nix: Metall. Trans. A, 1981, vol. 12A, pp. 893–901.10.1007/BF02648354 ↗
8. D.H. Lassila: Proc. 13th Int. Ballistics Symp., 1992, p. 549.
9. A. Fraczkiewicz and M. Biscondi: J. Phys., 1985, vols. C4-S4, p. 497.
10. G. Palumbo, S.J. Thorpe, and K.T. Aust: Scripta Mater., 1990, vol. 24, p. 1347.10.1016/0956-716X(90)90354-J ↗
11. N. Wang, G. Palumbo, Z. Wang, U. Erb, and K.T. Aust: Scripta Metall. Mater., 1993, vol. 28, p. 253.10.1016/0956-716X(93)90572-A ↗
12. Interstitial impurities were measured by Luvak, Inc.; metallic impurities were measured by Northern Analytical Laboratory Inc. using glow discharge mass spectrometry.
13. Binary Alloy Diagrams, T.B. Massalski, ed., ASM INTERNATIONAL, Materials Park, OH, 1990.
14. V.J. Keast, J. Bruley, P. Rez, J.M. Maclaren, and D.B. Williams: Acta Mater., 1998, vol. 46, p. 481.10.1016/S1359-6454(97)00262-0 ↗
15. V.J. Keast and D.B. Williams: Acta Mater., 1999, vol. 47, p. 3999.10.1016/S1359-6454(99)00260-8 ↗
16. U. Alber, H. Müllejans, and M. Rühle: Acta Mater., 1999, vol. 47, p. 4047.10.1016/S1359-6454(99)00265-7 ↗
17. H. Grimmer, W. Bollmann, and D.H. Warrington: Acta Crystallogr., 1974, vol. 30A, p. 197.10.1107/S056773947400043X ↗
18. M. Kumar, W.E. King, and A.J. Schwartz: Acta Mater., 2000, vol. 48, p. 2081.10.1016/S1359-6454(00)00045-8 ↗
19. A.J. Schwartz, M. Kumar, and W.E. King: Mater. Res. Soc. Symp. Proc., 2000, vol. 586, p. 3.10.1557/PROC-586-3 ↗