journal article·2014-01

A Microstructure-Based Time-Dependent Crack Growth Model for Life and Reliability Prediction of Turbopropulsion Systems

Kwai S. Chan, Michael P. Enright, Jonathan Moody, Simeon H. K. Fitch

Publisher page

Abstract

The objective of this investigation was to develop an innovative methodology for life and reliability prediction of hot-section components in advanced turbopropulsion systems. A set of generic microstructure-based time-dependent crack growth (TDCG) models was developed and used to assess the sources of material variability due to microstructure and material parameters such as grain size, activation energy, and crack growth threshold for TDCG. A comparison of model predictions and experimental data obtained in air and in vacuum suggests that oxidation is responsible for higher crack growth rates at high temperatures, low frequencies, and long dwell times, but oxidation can also induce higher crack growth thresholds (ΔK th or K th) under certain conditions. Using the enhanced risk analysis tool and material constants calibrated to IN 718 data, the effect of TDCG on the risk of fracture in turboengine components was demonstrated for a generic rotor design and a realistic mission profile using the DARWIN® probabilistic life-prediction code. The results of this investigation confirmed that TDCG and cycle-dependent crack growth in IN 718 can be treated by a simple summation of the crack increments over a mission. For the temperatures considered, TDCG in IN 718 can be considered as a K-controlled or a diffusion-controlled oxidation-induced degradation process. This methodology provides a pathway for evaluating microstructural effects on multiple damage modes in hot-section components.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Mechanical Failure Analysis and Simulation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. K.S. Chan, M.P. Enright, J.P. Moody, B. Hocking, and S.H.K. Fitch, J. Eng. Gas Turbine Power, 2012, vol. 134, p. 122501.10.1115/1.4007321 ↗
2. DARWIN® User’s Guide. Southwest Research Institute, 2011, San Antonio, TX.
3. M. Prager and G. Sines, ASME J. Basic Eng., Vol. 225, 1971, pp. 225-30.10.1115/1.3425217 ↗
4. J.M. Larson and S. Floreen, Metall. Trans. A, Vol. 8A, 1977, pp. 51-55.10.1007/BF02677263 ↗
5. Material data provided through direct telecommunications and in Probabilistic Design for Rotor Integrity (PDRI) Interim Report 9, Southwest Research Institute, March 4, 2010. The tests were performed by PW and funded under FAA Grant 05-G-005.
6. J.P. Pedron and A. Pineau, Mater. Sci. Eng., Vol. 56, 1982, pp. 143-56.10.1016/0025-5416(82)90167-7 ↗
7. M. Gao, D.J. Dwyer, and R.P. Wei: Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1994, pp. 581–92.
8. R.P. Wei and Z. Huang, Mater. Sci. Eng., Vol. A336, 2002, pp. 209-214.10.1016/S0921-5093(01)01957-8 ↗
9. D.A. Woodford: Energy Mater., 2006, vol. 1 (1), pp. 59–79.10.1179/174892306X99679 ↗
10. S. Floreen and R. Raj: Flow and Fracture at Elevated Temperatures, ASM, Materials Park, 1983, pp. 383–404.
11. K. Sadananda and P. Shahinian: Mater. Sci., Eng., 1980, vol. 43, pp. 159–68.10.1016/0025-5416(80)90143-3 ↗
12. S. Floreen, Metall. Trans. A, Vol. 17A, 1975, pp. 1741-49.10.1007/BF02642302 ↗
13. P.F. Browning: cited in Ref. [24] by D.A. Woodford: Energy Mater., 2006, vol. 1 (1), pp. 59–79.10.1179/174892306X99679 ↗
14. K. Sadananda and P. Shahinian: Creep-Fatigue Environment Interactions, R.M. Pelloux and N.S. Stoloff, eds., TMS-AIME, Warrendale, PA, 1979, pp. 86–111.
15. K. Sadananda and P. Shahinian, J. Eng. Mater. Technol., Vol. 100, 1978, pp. 381-87.10.1115/1.3443507 ↗
16. P. Valerio, M. Gao, and R.P. Wei, Scripta Metall. Mater., Vol. 30, 1994, pp. 1269-74.10.1016/0956-716X(94)90257-7 ↗
17. X. Liu, B. Kang, W. Carpenter and E. Barbero, J. Mater. Sci., Vol. 39, 2004, pp. 1967-73.10.1023/B:JMSC.0000017758.91184.ac ↗
18. I. Gurrappa, S. Weinbruch, D. Naumenko, and W.J. Quadakkers, Mater. Corros., Vol. 51, 2000, pp. 224-35.10.1002/(SICI)1521-4176(200004)51:4<224::AID-MACO224>3.0.CO;2-B ↗
19. R.M. McMeeking and A.G. Evans, J. Am. Ceram. Soc., Vol. 65, 1982, pp. 242-46.10.1111/j.1151-2916.1982.tb10426.x ↗
20. H. Ghonem, T. Nicholas, and A. Pineau, Fatigue Fract. Eng. Mater. Struct., Vol. 16, 1993, pp. 577–90.10.1111/j.1460-2695.1993.tb00103.x ↗
21. M. Olszta, D. Schreiber, L. Thomas, and S. Bruemmer: Adv. Mater. Process., 2012, vol. 170 (4), pp. 17–21.10.31399/asm.amp.2012-04.p017 ↗
22. R. Cozar and A. Pineay, Metall. Trans., Vol. 4, 1973, pp. 47-59.10.1007/BF02649604 ↗
23. K. Kusabiraki, H. Komatsu, and S. Ikeuchi, Metall. Mater. Trans. A, Vol. 29A, 1998, pp. 1169–74.10.1007/s11661-998-0243-6 ↗
24. J.C. Zhao, V. Ravikumar, and A.M. Beltran, Metall. Mater. Trans. A, Vol. 32A, 2001, pp. 1271–82.10.1007/s11661-001-0217-4 ↗
25. T. Sourmail, Mater. Sci. Technol.,, Vol. 17, 2001, pp. 1-14.10.1179/026708301101508972 ↗
26. T.M. Pollock and S. Tin, J. Propuls. Power, Vol. 22, 2006, pp. 361-74.10.2514/1.18239 ↗
27. J. Laigo, F. Tancret, R. Le Gall, and J. Furtado, Adv. Mater. Res., Vols. 15-17, 2007, pp. 702-07.10.4028/www.scientific.net/AMR.15-17.702 ↗
28. W. Acchar and C. A. Cairo, Mater. Res., Vol. 9, 2006, pp. 171-74.10.1590/S1516-14392006000200011 ↗
29. K. Koji, N. Yokotani, and Y. Umakoshi, Mater. Sci. Forum, Vol. 512, 2006, pp. 67-72.10.4028/www.scientific.net/MSF.512.67 ↗
30. K. Hirota, K. Mitani, M. Yoshinak, and O. Yamaguchi, Mater. Sci. Eng. A, Vol. 399, 2005, pp. 154-60.10.1016/j.msea.2005.02.062 ↗
31. G.A. Young, T.E. Capobianco, M.A. Penik, B.W. Morris, and J.J. McGee, Weld. J., Vol. 87, 2008, pp. 31s-43s.
32. J.D. Rigney and J.J. Lewandowski, Mater. Sci. Eng. A, Vol. 149, 1992, pp. 143-51.10.1016/0921-5093(92)90375-B ↗
33. S. Musikant: What Every Engineer Should Know About Ceramics, chap. 6, Marcel-Dekker, New York, NY, 1991, pp. 99–122.
34. T. Chudoba, N. Schwarzer, and F. Richter, Surf. Coat. Technol., Vol. 127, 2000, pp. 9–17.10.1016/S0257-8972(00)00552-1 ↗
35. D. Tromans and J.A. Meech, Miner. Eng., Vol. 15, 2002, pp. 1027-41.10.1016/S0892-6875(02)00213-3 ↗
36. J.A. Crawford, J. Appl. Phys., Vol. 35, 1964, pp. 2413-18.10.1063/1.1702871 ↗
37. P. Thompson, D.E. Cox, and J.B. Hastings, J. Appl. Crystallogr., Vol. 20, 1987, pp. 79-83.10.1107/S0021889887087090 ↗
38. H. Berger, H. Tang, and F. Levy, J. Cryst. Growth, Vol. 130, 1993, pp. 108-12.10.1016/0022-0248(93)90842-K ↗
39. C. Yan and D. Yue, Adv. Mater., Vol. 20, 2008, pp. 1055-58.10.1002/adma.200701752 ↗
40. D.R. Lide: CRC Handbook of Chemistry and Physics, 79th ed., CRC, Boca Raton, FL, 1998/1999.
41. T. Bredow and A.R. Gerson, Phys. Rev. B, Vol. 61, 2000, pp. 5194-201.10.1103/PhysRevB.61.5194 ↗
42. X.S. Du, S. Hak, T. Hibma, O.C. Rogojanu, and B. Struth, J. Cryst. Growth, Vol. 293, 2006, pp. 228-32.10.1016/j.jcrysgro.2006.05.013 ↗
43. R. Guillament, J. Lopitaux, B. Hannoyer, and M. Lenglet: J. Phys. IV, 1993, vol. 3, pp. 349–56.
44. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, Wiley, New York, 1976, p. 8.
45. W.J. Mills and L.D. Blackhurn, J. Eng. Mater. Technol., Vol. 110, 1988, pp. 286-97.10.1115/1.3226050 ↗
46. Y.H. Qi and P. Bruckel, and P. Lours, J. Mater. Sci., Vol. 22, 2003, pp. 371-74.
47. L.A. James and W.J. Mills, Eng. Fract. Mech., Vol. 22, 1985, pp. 797-817.10.1016/0013-7944(85)90109-2 ↗
48. J.L. Yuen, C.G. Schmidt, and P. Roy, Fatigue Fract. Eng. Mater. Struct., Vol. 8, 1985, pp. 65-76.10.1111/j.1460-2695.1985.tb00420.x ↗
49. S. Suresh and R.O. Ritchie, Scripta Metall., 1983, Vol. 17, pp. 575-80.10.1016/0036-9748(83)90357-5 ↗
50. S.J. Hudak, Jr. and R.A. Page, Corrosion, 1983, Vol. 39, pp. 285-90.10.5006/1.3581914 ↗
51. J.L. Yuen, P. Roy, and W.D. Nix, Metall. Trans. A., Vol. 15A, 1984, pp. 1769-75.10.1007/BF02666360 ↗
52. S.S. Kim. S.J. Choe, and K.S. Shin, Met. Mater., Vol. 4, No. 1, 1998, pp. 15-23.10.1007/BF03026060 ↗
53. Wei, R.P., and Landes, J.D., Mater. Res. Stand., Vol. 44 (46), July 1969, pp. 25-27.
54. R.H. Van Stone and D.C. Slavik: Fatigue and Fracture Mechanics: 31st Volume, ASTM STP 1389, G.R. Halford and J.P. Gallagher, eds., ASTM, West Conshohocken, PA, 2000, pp. 405–26.
55. P.C. Paris and F. Erdogan: Trans. ASME J. Basic Eng. Ser. D, 1963, vol. 85 (3), pp. 528–533.10.1115/1.3656900 ↗
56. R.W. Hayes, Metall. and Mater. Transactions A, Vol. 39A, 2008, pp. 2596-2606.10.1007/s11661-008-9564-8 ↗
57. M.J. Starink and P.A.S. Reed, Mater. Sci. Eng. A, Vol. 491, 2008, pp. 279–89.10.1016/j.msea.2008.02.016 ↗
58. T. Weerasooriya: AFWAL-TR-4038, University of Dayton, Dayton, OH, June 1987.
59. K.-M. Chang, M.F. Henry, and M.G. Benz: JOM, 1990, vol. 42 (12), pp. 29–35.10.1007/BF03220467 ↗
60. S.S. Kim, S.J. Choe, and K.S. Shin: Met. Mater., Vol. 4, 1998, pp. 1-13.10.1007/BF03026059 ↗
61. K.O. Findley, J.L. Evans, and A. Saxena: Int. Mater. Rev., Vol. 56, 2011, pp. 49-71.10.1179/095066010X12777205875796 ↗
62. C.M. Branco, A.S. Brito, and J. Byrne: Proceedings of TRO AVT Workshop on “Qualification of Life Extension Schemes for Engine Components”, Corfu, Greece, October 1998.
63. W. Hoffelner: Mater. Sci. Technol., 1987, vol. 3, pp. 765–70.10.1179/mst.1987.3.9.765 ↗
64. J.A. Ruiz-Sabariego and S. Pommier: Int. J. Fatigue, Vol. 31, 2009, pp. 1724-32.10.1016/j.ijfatigue.2009.03.009 ↗
65. J. Telesman, P. Kantzos, J. Gayda, P.J. Bonacuse, and A. Prescenzi: Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 215–24.
66. D. Rice, P. Kantzos, B. Hann, J. Neumann, and R. Helmink: Superalloys 2008, R.C. Reed, K.A. Green, P. Caron T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 139–47.
67. J. Tsang, R.M. Kearsey, P. Au, S. Oppenheimer, and E. McDevitt: Can. Metall. Q., Vol. 50, No. 3, 2011, pp. 222-31.10.1179/1879139511Y.0000000015 ↗
68. J.R. Rice: J. Appl. Mech., Vol. 35, 1968, pp. 379-86.10.1115/1.3601206 ↗
69. D. Broek: Elementary Engineering Fracture Mechanics, Sijthoff & Noordhoff, Alphen aan den Rijn, the Netherlands, 1978, pp. 218–19.
70. M.P. Enright and K.S. Chan: J. ASTM Int., Vol. 1, No. 8, 2004, pp. 87-103.10.1520/JAI11566 ↗