In-Situ Scanning Electron Microscopy/Electron Backscattered Diffraction Observation of Microstructural Evolution during α → γ Phase Transformation in Deformed Fe-Ni Alloy
Source abstract
Abstract
This article presents in-situ observation of ferrite (α)/austenite (γ) phase transformation in an Fe-8.5 at. pct Ni alloy deformed by rolling using an automated scanning electron microscopy/energy backscattered diffraction (SEM/EBSD) system. During heating, recrystallization in α phase and α → γ phase transformation independently occurred. The γ grains nucleated in unrecrystallized α grains were most probably incorporated into the grain interior of recrystallized α grains. They did not have any specific orientation relation (OR) with recrystallized α grains and grew in an isotropic manner. On the other hand, the intragranular γ grains nucleated in recrystallized α grains had a Kurdjumov–Sachs (K-S) OR with the α grains and grew in a considerably anisotropic manner. They preferentially grew along the common direction of surface traces of {110} α /{111} γ . Approximately half of grain boundary (GB) allotriomorphs had either the K-S OR or the Nishiyama–Wasserman (N-W) OR with the parent α grains. The γ allotriomorphs predominantly grew into the α grain having the special OR with themselves. The GB character distribution of γ phase at high temperatures was measured. The fraction of CSL boundaries was as high as 63 pct, particularly that of Σ3 grain boundaries (GBs) was 54 pct.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. J.K. Lee and H.I. Aaronson: Acta Metall., 1975, vol. 23, pp. 799–808.10.1016/0001-6160(75)90196-0 ↗
2. M. Enomoto: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1703–10.10.1007/s11661-006-0113-z ↗
3. H.I. Aaronson, W.T. Reynolds, Jr. and G.R. Purdy: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1731–45.10.1007/s11661-006-0116-9 ↗
4. G. Bruckner, J. Pospiech, I. Seidl, and G. Gottstein: Scripta Mater., 2001, vol. 44, pp. 2635–40.10.1016/S1359-6462(01)00956-3 ↗
5. T. Furuhara and T. Maki: Mater. Sci. Eng. A, 2001, vol. 312, pp. 145–54.10.1016/S0921-5093(00)01904-3 ↗
6. G. Miyamoto, T. Shinyoshi, J. Yamaguchi, T. Furuhara, T. Maki, and R. Uemori: Scripta Mater., 2003, vol. 48, pp. 371–77.10.1016/S1359-6462(02)00451-7 ↗
7. M. Nemoto: Scand. J. Metall., 1974, vol. 3, pp. 81–85.
8. M. Nemoto: Metall. Trans. A, 1977, vol. 8A, pp. 431–37.10.1007/BF02661753 ↗
9. M. Onink, F.D. Tichelaar, C.M. Brakman, E.J. Mittemeijer, and S. Zwaag: J. Mater. Sci., 1995, vol. 30, pp. 6223–34.10.1007/BF00369670 ↗
10. I.M. Fielden: Mater. Sci. Forum, 2004, vols. 467–470, pp. 875–80.10.4028/www.scientific.net/MSF.467-470.875 ↗
11. Yu. N. Gornostyrev, V.N. Urtsev, M.K. Zalalutdinov, P. Entel, A.V. Kaptsan, and A.R. Kuznetsov: Scripta Mater., 2005, vol. 53, pp. 153–58.10.1016/j.scriptamat.2005.04.001 ↗
12. T. Watanabe, K. Obara, S. Tsurekawa, and G. Gottstein: Z. Metallkd., 2005, vol. 96, pp. 1196–1203.10.3139/146.101162 ↗
13. D. Phelan, N. Stanford, and R. Dippenaar: Mater. Sci. Eng. A, 2005, vol. 407, pp. 127–34.10.1016/j.msea.2005.07.015 ↗
14. Y. Huang, F.J. Humphreys, and I. Brough: J. Microsc., 2002, vol. 208, pp. 18–23.10.1046/j.1365-2818.2002.01061.x ↗
15. P.J. Hurley and F.J. Humphreys: J. Microsc., 2004, vol. 213, pp. 225–34.10.1111/j.0022-2720.2004.01300.x ↗
16. S. Piazolo, M.W. Jessell, D.J. Prior, and P.D. Bons: J. Microsc., 2004, vol. 213, pp. 273–84.10.1111/j.0022-2720.2004.01304.x ↗
17. G.G.E. Seward, S. Celotto, D.J. Prior, J. Wheeler, and R.C. Pond: Acta Mater., 2004, vol. 52, pp. 821–32.10.1016/j.actamat.2003.10.049 ↗
18. K. Mirpuri, H. Wendrock, S. Menzel, K. Wetzig, and J. Szpunar: Microelectron. Eng., 2004, vol. 76, pp. 160–66.10.1016/j.mee.2004.07.044 ↗
19. S.I. Wright and M.M. Nowell: Chin. J. Stereol. Image Analysis, 2005, vol. 10, pp. 193–98.
20. S.I. Wright, D.P. Field, and M.M. Nowell: Mater. Sci. Forum, 2005, vols. 495–497, pp. 1121–30.10.4028/www.scientific.net/MSF.495-497.1121 ↗
21. K. Mirpuri, H. Wendrock, S. Menzel, K. Wetzig, and J. Szpunar: Thin Solid Films, 2006, vol. 469, pp. 703–17.10.1016/j.tsf.2005.08.353 ↗
22. K. Mirpuri, H. Wendrock, K. Wetzig, and J. Szpunar: Microelectron. Eng., 2006, vol. 83, pp. 221–35.10.1016/j.mee.2005.08.008 ↗
23. T. Fukino and S. Tsurekawa: Mater. Trans., 2008, vol. 49, pp. 2770–75.10.2320/matertrans.MAW200824 ↗
24. I. Lischewski, D.M. Kirch, A. Ziemons, and G. Gottstein: Text., Stress, Microstruct., 2008, vol. 2008.10.1155/2008/294508 ↗
25. S. Tsurekawa, T. Fukino, and T. Matsuzaki: Int. J. Mater. Res., 2009, vol. 100, pp. 800–05.10.3139/146.110119 ↗
26. T. Nemoto, T. Fukino, S. Tsurekawa, X. Gu, A. Teramoto, and T. Ohmi: Jpn. J. Appl. Phys., 2009, vol. 48, pp. 066507-1–066507-8.
27. H. Gleiter: Acta Metall., 1969, vol. 17, pp. 1421–28.10.1016/0001-6160(69)90004-2 ↗
28. T. Watanabe: Phil. Mag., 1983, vol. 47, pp. 141–46.10.1080/01418618308243114 ↗
29. G.C. Weatherly and W.-Z. Zhang: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1865–74.10.1007/BF02649034 ↗
30. J.B. Clark: High-Temperature, High-Resolution Metallography, Gordon and Breach, New York, 1967, pp. 347–75.
31. H.B. Aaron and H.I. Aaronson: Metall. Trans., 1971, vol. 2, pp. 23–37.10.1007/BF02662635 ↗
32. M. Shimada, H. Kokawa, Z.J. Wang, Y.S. Sato, and I. Karibe: Acta Mater., 2002, vol. 50, pp. 2331–41.10.1016/S1359-6454(02)00064-2 ↗
33. S. Tsurekawa, S. Nakamichi, and T. Watanabe: Acta Mater., 2006, vol. 54, pp. 3617–26.10.1016/j.actamat.2006.03.048 ↗
34. J.K. Mackenzie: Biometrika, 1958, vol. 45, pp. 229–40.10.1093/biomet/45.1-2.229 ↗