journal article·2006-11

Fatigue crack propagation in austenitic stainless steel weldments

J. T. Al-Haidary, A. A. Wahab, E. H. Abdul Salam

Publisher page

Abstract

The fatigue crack propagation rate (FCPR) in 316L austenitic stainless steel (ASS) and its weldments was investigated, at two loading amplitudes, 7 and 8.5 kN, under tension-tension mode. Two welding techniques, submerged arc welding (SAW) and manual arc welding (MAW), have been used. Magnetic δ-ferrite, depending upon Ni and Cr content in the metal, in the weld zone upon solidification was considered. The ferrite number (FN) of δ-ferrite formed in the SAW zone was much higher (maximum 9.6) compared to the corresponding value (maximum 0.75) in the MAW zone. A fatigue starter notch was positioned at different positions and directions with respect to the weld zone, in addition to the heat-affected zone (HAZ). Regions of high and low FCPRs as the fatigue crack propagated through and across the weld zone have been noticed. This is related to the direction of the tensile residual stresses present in weld zone, resulting from solidification of the weld metal. The FCPR was higher along through the HAZ and weld zone because of the microstructural change and direction and distribution of tensile residual stresses. The FCPR was much lower when crack propagated perpendicular to the weld zone, particularly in the case of SAW in which higher δ-ferrite volume fraction was noticed. A lower FCPR found across the weld zone, in both SAW and MAW, was accompanied by rubbed areas in their fractures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. D. Peckner and I.M. Bernstein:Handbook of Stainless Steel, Harold B. Graford and W. Gatewood, eds., McGraw-Hill Book Company, New York, NY, 1977, pp. 320–45.
2. D.L. Olson:Welding J., 1985, vol. 64 (10), pp. 281–97.
3. B.F. Dixon:Welding J., 1989, vol. 68 (5), pp. 171–80.
4. K. Kalligerakis and B.G. Mellor:Int. J. Joining Mater., 1997, vol. 9 (1), pp. 10–14.
5. P.C. Paris:Fatigue—An Interdisciplinary Approach, Syracuse University Press, Syracuse, NY, 1964.
6. I. LeMay:Principles of Mechanical Metallurgy, Edward Arnold, London, 1983.
7. Metals Handbook, ASM INTERNATIONAL, Materials Park, OH, 2000.
8. J.M. Kendall, M.N. Jaes, and J.F. Knott: inThe Behavior of Short Fatigue Cracks, K.J. Miller and E.R. De Los Rios, eds., John Wiley and Sons, Sussex, U.K., 1986, pp. 241–59.
9. A.J.R. Loureiro and A.A. Fernandes:Welding J., 1994, vol. 73 (9), pp. 225s-231s.
10. A. Morten, M.A. Langoy, and S.R. Stock:Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2297–2314.
11. G.E. Dieter:Mechanical Metallurgy, McGraw-Hill, London, 1988.
12. Annual Book of ASTM Standard, Iron and Steel Products, Materials Park, OH, 1988, vols. 1–3, pp. 565–601.
13. W.H. Kerns:Welding Handbook, Engineering, Costs, Quality and Safety, American Welding Society, 1984, vol. 5, pp. 256–280.
14. A.W. Asjad: Master’s Thesis, University of Technology, Baghdad, 1999.
15. J.W. Elmer and T.W. Egar:Welding J., 1990, vol. 69 (4), pp. 141S-150S.
16. L.W. Tsay, M.C. Young, and C. Chen:Corr. Sci., 2003, vol. 45, pp. 1985–97.10.1016/S0010-938X(03)00036-2 ↗
17. P. Venkateswaran, S. Ganesh Sundara Raman, and S.D. Pathak:Sci. Technol. Weld. Joining, 2005, vol. 10 (1), pp. 95–102.10.1179/174329305X29500 ↗
18. H.P. Lieurade:Welding World, 1983, vol. 21 (11), pp. 272–94.
19. T.R. Curney:Fatigue of Welded Structures, Cambridge University Press, London, 1979.
20. Y.W. Shi, B.Y. Chan, and J.X. Zhang:Eng. Fract. Mech, 1990, vol. 36, pp. 893–902.10.1016/0013-7944(90)90266-J ↗
21. J.T. Al-Haidary and A.A. Wahab:5th Jordanian Int. Mech. Eng. Conf., JIMC, Amman, Jordan, 2004, electronic print.