journal article·2015-01

Analysis of Creep Rupture Behavior of Cr-Mo Ferritic Steels in the Presence of Notch

Sunil Goyal, K. Laha, C. R. Das, M. D. Mathew

Publisher page

Abstract

Effect of notch on creep rupture behavior of 2.25Cr-1Mo, 9Cr-1Mo, and modified 9Cr-1Mo ferritic steels has been assessed. Creep tests were carried out on smooth and notched specimens of the steels in the stress ranging 90 to 300 MPa at 873 K (600 °C). Creep rupture lives of the steels increased in the presence of notch over those of smooth specimens, thus exhibiting notch strengthening. The strengthening was comparable for the 9Cr-1Mo and 2.25Cr-1Mo steels and appreciably more in modified 9Cr-1Mo steel. The strengthening effect was found to decrease with the decrease in applied stress and increase in rupture life for all the steels. The presence of notch decreased the creep rupture ductility of the steels significantly and the 2.25Cr-1Mo steel suffered more reduction than in the other two 9Cr-steels. Finite element analysis of stress distribution across the notch was carried out to understand the notch strengthening and its variation in the steels. The variation in fracture appearance has also been corroborated based on finite element analysis. Reduction in von-Mises stress across the notch throat plane resulted in strengthening in the steels. Higher reduction in von-Mises stress in modified 9Cr-1Mo steel than that in 2.25Cr-1Mo and 9Cr-1Mo steels induced more strengthening in modified 9Cr-1Mo steel under multiaxial state of stress.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. K. Laha, K.S. Chandravathi, P. Parameswaran, and K.B.S. Rao: Metall. Mater. Trans. A, 40A (2009) 386–97.10.1007/s11661-008-9724-x ↗
2. B.K. Choudhary, S. Saroja, K. B.S. Rao, S.L. Mannan: Metall. Mater. Trans. A, 30A (1999) 2825–34.10.1007/s11661-999-0120-y ↗
3. D. J. Smith, N. S. Walker and S. T. Kimmins, Int. J. Press. Vess. Piping, 80 (2003) 617–27.10.1016/S0308-0161(03)00134-0 ↗
4. G. Eggeler, W. Tato, P. Jemmely, and B. de Mestral, Scripta Metall. Mater., 27 (1992) 1091–96.10.1016/0956-716X(92)90479-X ↗
5. M.C. Pandey, A.K. Mukherjee and D.M.R. Taplin, J. Mater. Sci. 20 (1985) 1201–06.10.1007/BF01026314 ↗
6. Y. P. Jiang, W. L. Guo and Z. F. Yue, Comp. Mater. Sci 38 (2007) 653–59.10.1016/j.commatsci.2006.04.010 ↗
7. S. Goyal, K. Laha, C.R. Das, S. Panneer Selvi, and M.D. Mathew, Metall. Mater. Trans. A, 45A (2014) 619–32.10.1007/s11661-013-2025-z ↗
8. P.S. Webster and A.C. Pickard, J. Strain Anal., 22 (1987) 145–53.10.1243/03093247V223145 ↗
9. K.D. Al-Faddagh, G.A. Webster, and B.F. Dyson: Mechanical Behaviour of Materials IV, J. Carlsson and N.G. Ohlson, eds., Pergamon Press, Oxford, 1984, pp. 289–95.10.1016/B978-1-4832-8372-2.50033-6 ↗
10. D. McLean, B.F. Dyson, and D.M.R. Taplin: in The Fourth International Conference on Fracture, vol. 1, D.M.R. Taplin, ed., University of Waterloo Press, Waterloo, 1977, pp. 325–62.10.1016/B978-0-08-022136-6.50032-9 ↗
11. E.A. Davis and M.J. Manjoine: “Effect of Notch Geometry on Rupture Strength at Elevated Temperatures”, ASTM STP 128, 1953, pp. 67–87.10.1520/STP41685S ↗
12. D.R. Hayhurst and G.A. Webster: in Techniques for Multiaxial Creep Testing. D.J. Gooch and I.M. How, eds., Elsevier Applied Science, Amsterdam, 1986, pp. 137–75.10.1007/978-94-009-3415-3_9 ↗
13. D. Wu, E.M. Christian, E.G. Ellison: J. Strain Anal., 19 (1984) 209–20.10.1243/03093247V194209 ↗
14. D.R. Hayhurst, J.T. Henderson, Int. J. Mech. Sci., 19 (1977) 133–46.10.1016/0020-7403(77)90073-X ↗
15. G. Eggeler, C. Wiesner, J. Strain Anal., 28 (1993) 13–22.10.1243/03093247V281013 ↗
16. K. Wasmer, F. Bilgari, and K.M. Nikbin: European Conference on Fracture; ECF 14, Fracture Mechanics Beyond 2000, 2002, pp. 553–62.
17. B. Al-Abed, R. Timmins, G.A. Webster and M. S. Loveday: Mater. High Temp., 16 (1999) 143–58.10.1179/mht.1999.014 ↗
18. A.A. Becker, T.H. Hyde, W. Sun, and P Andersson, Comp. Mater. Sci., 25 (2002) 34–41.10.1016/S0927-0256(02)00247-1 ↗
19. O. Kwon, C.W. Thomas, D. Knowles: Int. J. Press. Vess. Piping 81 (2004) 535–4210.1016/j.ijpvp.2003.12.023 ↗
20. H.K. Kim and H.J. Kim, J. Mater. Sci., 43 (2008) 2602–10.10.1007/s10853-008-2469-5 ↗
21. M.C. Pandey, A.K. Mukherjee and D.M.R. Taplin, J. Mater. Sci. 20 (1985) 1201–06.10.1007/BF01026314 ↗
22. B.J. Cane: Proc. 5th Int. Conf. Fract. Cannes, 1981, vol. 3, pp. 1285–93.
23. S. Goyal, K. Laha, K.S. Chandravathi, P. Parameswaran and M.D. Mathew, Phil. Mag. 91 (2011) 3128–54.10.1080/14786435.2011.570279 ↗
24. I.J. Perrin, D.R. Hayhurst, Int. J. Press. Vess. Pip. 76 (1999) 599- 617.10.1016/S0308-0161(99)00051-4 ↗
25. N. Bano, A.K. Koul and M. Nganbe, Metall. Mater. Trans. A, 45 (2014) 1928–36.10.1007/s11661-013-2172-2 ↗
26. G.H. Edward and M.F. Ashby: Acta. Metall., 27 (1979) 1505–18.10.1016/0001-6160(79)90173-1 ↗
27. K.J. Hsia, A.S. Argon and D.M. Parks, Mech. Mater., 11 (1991) 43–62.10.1016/0167-6636(91)90038-2 ↗
28. K.J. Hsia, A.S. Argon and D.M. Parks, Mech. Mater., 11 (1991) 19–42.10.1016/0167-6636(91)90037-Z ↗
29. D.R. Hayhurst, F.A. Leckie and J.T. Henderson, Int. J. Mech. Sci. 19 (1977) 147–59.10.1016/0020-7403(77)90074-1 ↗
30. G.A. Webster, S.R. Holdsworth, M.S. Loveday, K. Nikbin, I.J. Perrin, H. Purper, R.P. Skelton and M.W. Spindler, Fat. Frac. Eng. Mater. Struct. 27 (2004) 319–42.10.1111/j.1460-2695.2004.00765.x ↗
31. W.D. Pilkey, D.F. Pilkey: Peterson’s Stress Concentration Factors, 3rd edn, Wiley, New York, 2008.
32. C.R. Calladine, Proc. R Soc. Lond. A 309 (1969) 363–75.10.1098/rspa.1969.0047 ↗
33. B.F. Dyson and M.S. Loveday: Proc. Creep in Structures, TUTAM Symp. Pergamon Press, Oxford, pp. 406–21.
34. S.E. Ng, G.A. Webster and B.F. Dyson: in Advances in Fracture Research, ICF-5, D. Francois et al., eds., Pergamon Press, Oxford, 1980, pp. 1275–83.
35. W.D. Nix, J.C. Earthman, G. Eggeler and B. Ilschner, Acta. Metall. 37 (1989) 1067–77.10.1016/0001-6160(89)90103-X ↗
36. J.W. Hancock, Met. Sci. 10 (1976) 319–25.10.1179/msc.1976.10.9.319 ↗
37. D. Hull and D.E. Rimmer, Phil. Mag. 4 (1959) 673–87.10.1080/14786435908243264 ↗
38. M.F. Ashby, C. Gandhi and D.M.R. Taplin, Acta. Metall. 27 (1979) 699–729.10.1016/0001-6160(79)90105-6 ↗
39. D. Peter, F. Otto, T. Depka, P. Nortershauser, and G. Eggeler: Mat.-wiss. u.Werkstofftech, 2011, vol. 42, pp. 493–99.10.1002/mawe.201100682 ↗
40. D. Kobayashi, M. Miyabe, Y. Kagiya, Y. Nagumo, R. Sugiura, T. Matsuzaki, and A.T. Yokobori, Jr.: Strength Fract Complex, 2011, vol. 7, pp. 157–67.10.3233/SFC-2011-0134 ↗
41. S. Mandal, A.K. Bhaduri, and V.S. Sarma: J. Mater. Sci., 46 (2011) 275–84.10.1007/s10853-010-4982-6 ↗