journal article·2014-02Open access

A New Analytical Approach for the Velocity Field in Rolling Processes and Its Application in Through-Thickness Texture Prediction

Koen Decroos, Jurij Sidor, Marc Seefeldt

Abstract

A new analytical model is presented that expresses kinematically admissible velocity fields in rolling processes. Opposed to conventional streamline approaches, the current model does not force the material to flow along the prescribed lines, but introduces a new coordinate that is constant over these lines, to prescribe a fixed component of the velocity in the rolling direction as a function of that coordinate and the coordinate along the rolling direction. The interaction between the rolls and the surface is incorporated in the model via two scalar parameters which depend on the friction conditions between the roll and the sheet, and the properties of rolled material. The scalar parameters can be tuned with experimental observations of deformation flow across the thickness. The modelled material flow does not reveal significant deviation from the one calculated by streamlines. The obtained analytical expressions for the velocity gradient tensor components combined with polycrystal plasticity models enables the prediction of the through-thickness texture evolution for various friction conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. U.F. Kocks, C.N. Tome, and H. Wenk: Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Affect on Materials Properties, Cambridge University Press, Cambridge, 1998, p. 692.
2. S. Kobayashi, T. Altan: Metal Forming and the Finite Element Method, Oxford University Press, Oxford, 1989, p. 396.10.1093/oso/9780195044027.001.0001 ↗
3. T. von Karaman: Z. Angew. Math. Mech., 1925, vol. 5, pp. 130-141.10.1002/zamm.19250050209 ↗
4. R.G. Fenton and H.A. Khataan: in Process Modelling: Fundamentals and Applications to Metals, T. Altan, ed., ASM, Cleveland, OH, 1980, p. 448.
5. H. Takuda, N. Hatta, H. Lippmann, and J. Kokado: Ing. Arch., 1989, vol. 59, pp. 274–84.10.1007/BF00534367 ↗
6. H. Sheikh: Applied Mathematical Modelling, 2009, vol 33 pp. 2187–2195.10.1016/j.apm.2008.05.022 ↗
7. K. Komori: International Journal of Mechanical Sciences, 2002, vol 44 pp. 37–55.10.1016/S0020-7403(01)00086-8 ↗
8. L. Anand, S.R. Kalidindi: Mech. Mat., 1994, vol. 17, pp. 223-243.10.1016/0167-6636(94)90062-0 ↗
9. L. Delannay, PJ. Jaques, SR. Kalidindi: Int. J. Plast., 2006, vol. 22, pp. 1879-1898.10.1016/j.ijplas.2006.01.008 ↗
10. G. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307-324.
11. R.A. Lebensohn, C.N. Tome: Acta Metall. et Mat., 1993, vol. 41, pp. 2611-2624.10.1016/0956-7151(93)90130-K ↗
12. Van Houtte, P., S. Li, L. Delannay: Int. J. Plast., 2005, vol. 21, pp. 589-624.10.1016/j.ijplas.2004.04.011 ↗
13. M. Crumbach, G. Pomana, P. Wagner, and G. Gottstein: in Recrystallisation and Grain Growth, Proc. First Joint Conf., G. Gottstein and D.A. Molodov, eds., Springer, Berlin, 2001, p. 1408.
14. Q. Xie, P. Eyckens, H. Vegter, J. Moerman, A. Van Bael, and P.Van Houtte: Mater. Sci. Eng. A, 2013, vol. 581, pp. 66–72.10.1016/j.msea.2013.06.008 ↗
15. C.H. Choi, J.W. Kwon, K.H. Oh, D.N. Lee: Acta Mat., 1997, vol. 45, pp. 5119-5128.10.1016/S1359-6454(97)00169-9 ↗
16. P. Van Houtte, J. Gawad, P. Eyckens, B. Van Bael, G. Samaey, and D. Roose: Proced. IUTAM, 2012, vol. 3, pp. 67–75.10.1016/j.piutam.2012.03.005 ↗
17. J. Segurado, R.A. Lebensohn, J. LLorca, and C.N. Tomé: Int. J. Plast., 2012, vol. 28, pp. 124-140.10.1016/j.ijplas.2011.07.002 ↗
18. O. Engler, M.Y. Huh, C.N. Tomé: Met. Mat. Trans. A, 2000, vol. 31, pp. 2299-2315.10.1007/s11661-000-0146-7 ↗
19. A.N. Dogruoglu: J. Mat. Proc. Techn., 2001, vol. 110, pp. 287–299.10.1016/S0924-0136(00)00897-9 ↗
20. S.I. Oh, S. Kobayashi: Int. J. Mech. Sci., 1975, vol. 17, pp. 293-305.10.1016/0020-7403(75)90010-7 ↗
21. S.H. Zhang, D.W.Zhao,C.R.Gao: Int. J. Mech. Sci., 2012, vol. 57 pp. 74–78.10.1016/j.ijmecsci.2012.02.006 ↗
22. D. Zhao, S. Zhang, C. Li, H. Song, and G. Wang: J. Iron Steel Res. Int., 2012, vol. 19, pp. 20–24.10.1016/S1006-706X(12)60068-5 ↗
23. S. Sezek, B. Aksakal, Y. Can: Mat. Des., 2008, vol. 29, pp. 584–596.10.1016/j.matdes.2007.03.005 ↗
24. J.P. Wanga, W.C. Kao, H.D. Lee, J. Wang: J. Mat. Proc. Techn.,2008, vol 204, pp. 425-433.10.1016/j.jmatprotec.2007.11.102 ↗
25. B. Beausir, L.S. Toth: Mat. Sc. Forum, 2005, vol. 495-497, pp. 1603-1608.10.4028/www.scientific.net/MSF.495-497.1603 ↗
26. B. Beausir and L.S. Toth: in International Conference on Microstructure and Texture in Steels, A. Haldar, S. Suwas, and D. Bhattacharjee, eds., MATS2008, Springer Verlag, Jamshedpur, India, 2008, p. 488.
27. S. Li, F. Sun, H. Li: Acta Mat., 2010, vol. 58, pp. 1317-1331.10.1016/j.actamat.2009.10.036 ↗
28. C. Boldetti, C. Pinna, I. Howard, G. Gutierrez: Appl. Mech. Mat., 2005, vol. 3-4, pp. 111-116.
29. H. Valberg: Applied Metal Forming Including FEM Analysis, Cambridge University Press, Cambridge, 2010, p. 460.10.1017/CBO9780511801907 ↗
30. Y.H. Ji, and J.J. Park: Mater. Sci. Eng. A, 2009, vol. 499, pp. 14–17.10.1016/j.msea.2007.11.099 ↗