journal article·2012-09

Tailored Heat Treated Accumulative Roll Bonded Aluminum Blanks: Microstructure and Mechanical Behavior

Verena Maier, Tina Hausöl, Christian W. Schmidt, Wolfgang Böhm, Hung Nguyen, Marion Merklein, Heinz Werner Höppel, Mathias Göken

Publisher page

Abstract

Aluminum alloy AA6016 was accumulative roll bonded up to eight cycles and investigated regarding formability by bending tests. Due to the limited bendability of accumulative roll bonding (ARB) processed materials, a tailored laser heat treatment was performed along the bending edge before forming. This tailored laser heat treatment causes a local recrystallization and recovery of the bending samples at the deformation zone, which locally increases ductility and allows higher bending angles achievable with lower forming forces. Between the recrystallized heat treated zone and the unaffected ultrafine-grained (UFG) base material, a gradient in grain size with a bimodal region is formed. This observed microstructural profile is confirmed by local mechanical testing measuring the hardness and strain rate sensitivity by nanoindentation techniques.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. R.Z. Valiev, I.V. Alexandrov, Y.T. Zhu, and T.C. Lowe: J. Mater. Res., 2002, vol. 17, pp. 5–8.10.1557/JMR.2002.0002 ↗
2. N. Tsuji, Y. Saito, S.H. Lee, and Y. Minamino: Adv. Eng. Mater., 2003, vol. 5, pp. 338–44.10.1002/adem.200310077 ↗
3. H.W. Höppel, J. May, and M. Göken: Adv. Eng. Mater., 2004, vol. 6, pp. 781–84.10.1002/adem.200306582 ↗
4. N. Tsuji: Bulk Nanostructured Materials, Wiley-VCH, Weinheim, 2009, pp. 235–53.10.1002/9783527626892.ch10 ↗
5. N. Tsuji: Nanostructured Metals and Alloys, Woodhead Publishing, Philadephia, PA, 2011, pp. 40–58.10.1533/9780857091123.1.40 ↗
6. I. Topic, H.W. Höppel, D. Staud, M. Merklein, M. Geiger, and M. Göken: Adv. Eng. Mater., 2008, vol. 10, pp. 1101–09.10.1002/adem.200800167 ↗
7. I. Topic, H.W. Höppel, and M. Göken: Mater. Sci. Forum, 2008, vols. 584–586, pp. 833–39.10.4028/www.scientific.net/MSF.584-586.833 ↗
8. R. Lapovok, P.W.J. McKenzie, P.F. Thomson, and S.L. Semiatin: Int. J. Mater. Res., 2007, vol. 98, pp. 325–31.10.3139/146.101466 ↗
9. I. Topic, T. Hausöl, U. Vogt, M. Merklein, H.W. Höppel, and M. Göken: unpublished research, 2011.
10. M. Merklein and U. Vogt: Key Eng. Mater., 2009, vols. 410–411, pp. 169–76.10.4028/www.scientific.net/KEM.410-411.169 ↗
11. M. Merklein and U. Vogt: Proc. COMA 2009, 2010, pp. 135–40.
12. M. Geiger, M. Merklein, and M. Kerausch: Ann. CIRP 2004, 2004, vol. 53 (1), pp. 223–26.10.1016/S0007-8506(07)60684-2 ↗
13. M. Hogg: Herstellung und Umformung Lokal Wärmebehandelter Platinen, Beiträge zur Umformtechnik, DGM-Informationsgesellschaft, Frankfurt, 2006.
14. M. Merklein, D. Staud, and U. Vogt: Int. J. Microstruct. Mater. Prop., 2009, vol. 4, pp. 525–33.
15. E. Doege and B.-A. Behrens: Handbuch Umformtechnik, Springer-Verlag, Berlin, 2007, pp. 376–84.
16. M. Merklein and M. Kaupper: Key Eng. Mater., 2009, vols. 410–411, pp. 3–11.10.4028/www.scientific.net/KEM.410-411.3 ↗
17. S.H. Lee, Y. Saito, T. Sakai, and H. Utsunomiya: Mater. Sci. Eng. A, 2002, vol. 325, pp. 228–35.10.1016/S0921-5093(01)01416-2 ↗
18. A.L.M. Costa, A.C.C. Reis, L. Kestens, and M.S. Andrade: Mater. Sci. Eng. A, 2005, vol. 406, pp. 279–85.10.1016/j.msea.2005.06.058 ↗
19. G. Marathe and R.J. Hebert: J. Mater. Sci., 2010, vol. 45, pp. 4770–77.10.1007/s10853-010-4636-8 ↗
20. A. Böhner, V. Maier, K. Durst, H.W. Höppel, and M. Göken: Adv. Eng. Mater., 2011, vol. 13, pp. 251–55.10.1002/adem.201000270 ↗
21. T. Hausöl, H.W. Höppel, and M. Göken: J. Mater. Sci., 2010, vol. 45, pp. 4733–38.10.1007/s10853-010-4678-y ↗
22. T. Hausöl, H.W. Höppel, and M. Göken: Mater. Sci. Forum, 2011, vols. 667–669, pp. 217–22.
23. V. Maier, K. Durst, J. Mueller, B. Backes, H.W. Höppel, and M. Göken: J. Mater. Res., 2011, vol. 26, pp. 1421–30.10.1557/jmr.2011.156 ↗
24. Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai, and R.G. Hong: Scripta Mater., 1998, vol. 39, pp. 1221–27.10.1016/S1359-6462(98)00302-9 ↗
25. I. Topic, H.W. Höppel, and M. Göken: Int. J. Mater. Res., 2007, vol. 98, pp. 320–24.10.3139/146.101469 ↗
26. DIN EN ISO 7438:2005: Metallische Werkstoffe–Biegeversuch, Beuth-Verlag, Berlin, 2005.
27. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–80.10.1557/JMR.1992.1564 ↗
28. J.L. Hay and G.M. Pharr: ASM Handbook, 2000, vol. 8, pp. 232–43.
29. J. Scharnweber, W. Skrotzki, C.-G. Oertel, H.-G. Brokmeier, H.W. Höppel, I. Topic, and J. Jaschinksi: Adv. Eng. Mater., 2010, vol. 10, pp. 989–94.10.1002/adem.201000067 ↗
30. L.R. Vaidyanath, M.G. Nicholas, and D.R. Milner: Br. Weld. J., 1959, vol. 6, pp. 13–28.
31. L. Li, K. Nagai, and F. Yin: Sci. Technol. Adv. Mater., 2008, vol. 9, article no. 023001.10.1088/1468-6996/9/2/023001 ↗
32. C.W. Schmidt, C. Knieke, V. Maier, H.W. Höppel, W. Peukert, and M. Göken: Mater. Sci. Forum, 2011, vols. 667–669, pp. 725–30.
33. E.O. Hall: Proc. Phys. Soc., 1951, vol. B64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
34. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
35. K. Durst, B. Backes, and M. Göken: Scripta Mater., 2005, vol. 52, pp. 1093–97.10.1016/j.scriptamat.2005.02.009 ↗
36. B. Backes, K. Durst, and M. Göken: Phil. Mag., 2006, vol. 86, pp. 5541–51.10.1080/14786430600735468 ↗
37. A. Vevecka-Priftaj, A. Böhner, J. May, H.W. Höppel, and M. Göken: Mater. Sci. Forum., 2008, vols. 584–586, pp. 741–47.10.4028/www.scientific.net/MSF.584-586.741 ↗
38. L.W. Meyer, M. Hockauf, L. Krüger, and I. Schneider: Int. J. Mater. Res., 2007, vol. 98, pp. 191–99.10.3139/146.101462 ↗
39. T. Qian, M. Marx, K. Schüler, M. Hockauf, and H. Vehoff: Acta Mater., 2010, vol. 58, pp. 2112–23.10.1016/j.actamat.2009.11.053 ↗