Aging Characteristics of Sn-Ag Eutectic Solder Alloy with the Addition of Cu, In, and Mn
Source abstract
Abstract
In the present investigation, three types of solder alloy, i.e., Sn-Ag-Cu, Sn-Ag-In, and Sn-Ag-Cu-Mn, have been prepared and joined with Cu substrate. In the reflowed condition, the joint interface is decorated with Cu6Sn5 intermetallic in all cases. During aging at 100 °C for 50 to 200 hours, Cu3Sn formation took place in the diffusion zone of the Sn-Ag-Cu and Sn-Ag-In vs Cu assembly, which was not observed for the Sn-Ag-Cu-Mn vs Cu joint. Aging also leads to enhancement in the width of reaction layers; however, the growth is sluggish (~134 KJ/mol) for the Sn-Ag-Cu-Mn vs Cu transition joint. In the reflowed condition, the highest shear strength is obtained for the Sn-Ag-Cu-Mn vs Cu joint. Increment in aging time results in decrement in shear strength of the assemblies; yet small reduction is observed for the Sn-Ag-Cu-Mn vs Cu joint. The presence of Mn in the solder alloy is responsible for the difference in microstructure of the Sn-Ag-Cu-Mn solder alloy vs Cu assembly in the reflowed condition, which in turn influences the microstructure of the same after aging with respect to others.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. J.Y. Tsai, Y.C. Hu, C.M. Tsai, and C.R. Kao: J. Electron Mater., 2003, vol. 32, pp. 1203–08.10.1007/s11664-003-0012-7 ↗
2. K.S. Kim, S.H. Hua, and K. Suganuma: Microelectron. Reliab., 2003, vol. 43, pp. 259–67.10.1016/S0026-2714(02)00239-1 ↗
3. A. Kar, M. Ghosh, B.S. Majumdar, R.N. Ghosh, and A.K. Ray: Mater. Technol., 2007, vol. 22, pp. 161–65.10.1179/175355507X236632 ↗
4. F. Gao, T. Takemoto, and H. Nishikawa: Mater. Sci. Eng., 2006, vol. A420, pp. 39–46.10.1016/j.msea.2006.01.032 ↗
5. I. Shohji, T. Yoshida, T. Takahashi, and S. Hioki: Mater. Sci. Eng., 2004, vol. A366, pp. 50–55.10.1016/j.msea.2003.09.057 ↗
6. G.S. Gonya, K.J. Lake, C.R. Long, and N.R. Wild: U.S. Patent 5,411,703, May 2, 1995.
7. K.N. Tu and R.D. Thompson: Acta Metall., 1982, vol. 30, pp. 947–52.10.1016/0001-6160(82)90201-2 ↗
8. Q. Xiao, L. Nguyen, and W.D. Armstrong: Electronic Components and Technology Conf., Electronic Component Assemblies & Materials Association (ECA), Electronic Industries Alliance (EIA) and IEEE Components, Packaging & Manufacturing Technology Society (IEEE – CPMT), Las Vegas, NV, June 1–4, 2004, vol. 1, pp. 1325–32.
9. J.J. Sundelin, S.T. Nurmi, T.K. Lepisto, and E.O. Ristolainen: Mater. Sci. Eng., 2006, vol. 420, pp. 55–62.10.1016/j.msea.2006.01.065 ↗
10. M. He, Z. Chen, and G. Qi: Acta Metall., 2004, vol. 52, pp. 2047–56.
11. J. Liang, N. Dariavach, P. Callahan, and D. Shangguan: Mater. Trans., 2006, vol. 47, pp. 317–25.10.2320/matertrans.47.317 ↗
12. K.N. Tu: Phys. Rev. B, 1994, vol. 49, pp. 2030–34.10.1103/PhysRevB.49.2030 ↗
13. K.S. Lin, H.Y. Hunng, and C.P. Chou: J. Mater. Eng. Perform., 2008, DOI:10.1007/s11665-008-9276-710.1007/s11665-008-9276-7 ↗
14. F. Gao, J. Lee, S. Choi, J.P. Lucas, T.R. Bieler, and K.N. Subramanian: J. Electron Mater., 2001, vol. 30, pp. 1073–82.10.1007/s11664-001-0132-x ↗
15. A. Kar, M. Ghosh, A.K. Ray, and R.N. Ghosh: Mater. Sci. Eng., 2007, vol. A459, pp. 69–74.10.1016/j.msea.2006.12.084 ↗
16. J.H. Shim, C.S. Oh, B.J. Lee, and D.N. Lee: Z. Metallkd., 1996, vol. 87, pp. 205–12.
17. “Phase diagrams and computational thermodynamics,” http://www.metallurgy.nist.gov/phase/solder/agcusn.html
18. X.J. Liu, C.P. Wang, I. Ohnuma, R. Kainuma, and K. Ishida: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1641–54.10.1007/s11661-004-0073-0 ↗
19. X. Deng, M. Koopman, N. Chawla, and K.K. Chawla: Mater. Sci. Eng., 2004, vol. A364, pp. 240–43.10.1016/j.msea.2003.08.032 ↗
20. E.A. Brandes and G.B. Brook: Smithells Metals Reference Book, Butterworth Heinemann, Oxford, United Kingdom, 1998, pp. 13_16 and 13_19.
21. C.M. Chuang and K.L. Lin: J. Electron Mater., 2003, vol. 32, pp. 1426–31.10.1007/s11664-003-0111-5 ↗
22. M. Ghosh, S. Kundu, S. Chattrjee, and B. Mishra: Metall. Mater. Trans A, 2005, vol. 36A, pp. 1891–99.10.1007/s11661-005-0052-0 ↗