journal article·2001-02

The effect of testing temperature on fracture toughness of austempered ductile iron

Cheng-Hsun Hsu, Shen-Chih Lee, Yih-Hsun Shy, Hui-Ping Feng

Publisher page

Abstract

The effect of testing temperature (− 150 °C, 25 °C, and + 150 °C) on the fracture toughness of austempered ductile iron (ADI) was studied. Specimens were first austenitized at 900 °C for 1.5 hours and then salt-bath quenched to 360 °C or 300 °C, for 1, 2, or 3 hours of isothermal holding before cooling to room temperature. The resulting matrices of the iron were of upper-ausferrite and lower-ausferrite. It was found that raising the testing temperature to 150 °C from ambient improved the fracture toughness by 18, 30, and 7 pct for the as-cast/lower-ausferrite ADI/upper-ausferrite ADI, respectively. Lowering the testing temperature to −150 °C produced a decrease of −15, −35, and −48 pct. Optical microscopy, X-ray diffraction analysis, and scanning electron microscopy (SEM) fractography were applied to correlate the toughness variation with testing temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. ASTM A897-90, Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1990, vol. 01.02, pp. 557–62.
2. S.C. Lee, C.H. Hsu, C.C. Chang, and H.P. Feng: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2511–21.10.1007/s11661-998-0223-x ↗
3. K.B. Rundman, D.J. Moore, K.L. Hayrynen, W.J. Dubensky, and T.N. Rouns: J. Heat Treating, 1988, vol. 5 (2), pp. 79–95.10.1007/BF02833175 ↗
4. J.F. Janowak and R.B. Gund: AFS Trans., 1983, pp. 377–87.
5. T.S. Shih, C.S. Chang, L.Z. Hwang, and C.R. Loper, Jr.: AFS Trans., 1991, pp. 793–808.
6. H. Bayati and R. Elliott: MST, 1997, vol. 13, pp. 319–26.10.1179/mst.1997.13.4.319 ↗
7. J.R. Laub: Adv. Mater. Processes, 1994, pp. 40–43.
8. K. Hornung: Heat Treatment Met., 1986, pp. 87–94.
9. Y. Tanaka and H. Kage: JIM, 1992, vol. 33 (6), pp. 543–57.
10. J. Race and L. Scott: Heat Treatment Met., 1991, pp. 105–09.
11. ASTM E399-90, Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1990, vol. 03.01, pp. 506–36.
12. ASTM E561-92, Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1992, vol. 03.01, pp. 597–608.
13. B.D. Cullity: Elements of X-ray Diffraction, Addison-Wesley Publishing Company, Reading, MA, 1978, pp. 411–17.
14. K.B. Rundman and K.C. Kluy: AFS Trans., 1982, pp. 499–508.
15. H. Bayati and R. Elliott: MST, 1995, vol. 11, pp. 118–29.10.1179/mst.1995.11.2.118 ↗
16. B.C. Lui, T.X. Li, Z.J. Rue, X.Y. Yang, E.Q. Huo, and C.R. Loper, Jr.: AFS Trans., 1990, vol. 98, pp. 753–57.
17. A.S. Hamid Ali and R. Elliott: MST, 1996, vol. 12, pp. 679–90.10.1179/mst.1996.12.8.679 ↗
18. B. Kovacs: AFS Trans., 1991, pp. 281–86.
19. I. Minkoff: The Physical Metallurgy of Cast Iron, John Wiley & Sons, New York, NY, 1983, p. 184.
20. J.M. Velez, A. Garboggini, and A.P. Tschiptschin: MST, 1996, vol. 12, pp. 329–37.10.1179/mst.1996.12.4.329 ↗
21. H.P. Feng, S.C. Lee, C.H. Hsu, and J.M. Ho: Mater. Chem. Phys., 1999, vol. 59, pp. 154–61.10.1016/S0254-0584(99)00035-8 ↗