journal article·2006-12

Texture evolution during strain-induced martensitic phase transformation in 304L stainless steel at a cryogenic temperature

Kaixiang Tao, Donald W. Brown, Sven C. Vogel, Hahn Choo

Publisher page

Abstract

The strain-induced martensitic phase transformation during quasi-static uniaxial compression testing of a 304L stainless steel was investigated at 300 and 203 K using time-of-flight neutron diffraction to study the evolution of transformation texture. A number of specimens were precompressed to different strain levels at 300 and 203 K and the texture was investigated. At 203 K, the newly formed martensites are bcc and hcp phases and the texture analysis shows that the martensites are highly textured due to the grain-orientation-dependent phase transformation. The bcc {100} planes are mostly oriented with their plane-normal parallel to the loading direction at the beginning of the phase transformation and this texture is weakened during the subsequent compressive deformation. In the case of fcc to hcp transformation, it is less dependent on the grain orientation, although the fcc grains with {111} plane-normal at an angle close to 40 deg to the loading direction transform easier and the {0001} plane-normal of the newly formed hcp phase tends to rotate toward the loading direction during the texture evolution. The final texture of bcc and hcp martensites is the result of the interaction between deformation texture and transformation texture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. S.A. Kulin, M. Cohen, and B.L. Averbach: J. Met., 1952, vol. 4, pp. 661–68.
2. T. Angel: J. Iron Steel Inst. (London), 1954, vol. 177, pp. 165–74.
3. S.S. Hecker, M.G. Stout, K.P. Staudhammer, and J.L. Smith: Metall. Trans. A, 1982, vol. 13, pp. 619–26.10.1007/BF02644427 ↗
4. R.P. Reed: Acta Metall., 1962, vol. 10, pp. 865–77.10.1016/0001-6160(62)90101-3 ↗
5. M.C. Mataya, M.J. Carr, and G. Krauss: Mater. Sci. Eng., 1973, vol. 57 (2), pp. 205–22.10.1016/0025-5416(83)90211-2 ↗
6. E.C. Oliver, P.J. Withers, M.R. Daymond, S. Ueta, and T. Mori: Appl. Phys. A, 2002, vol. 74 (Suppl.), pp. 1143–45.10.1007/s003390201555 ↗
7. K. Tao, J.J. Wall, D.W. Brown, S.C. Vogel, H. Li, M.A.M. Bourke, and H. Choo: Mater. Res. Soc. Symp. Proc., 2005, vol. 840, pp. Q7.4.1-Q7.4.6.
8. Z. Nishiyama: Martensitic Transformation, Academic Press, New York, NY, 1978, pp. 48–52.
9. S.C. Vogel, C. Hartig, L. Lutterotti, R.B. Von Dreele, H.-R. Wenk, and D.J. Williams: Powder Diffraction, 2004, vol. 19(1), pp. 65–68.10.1154/1.1649961 ↗
10. T. Mukai, M. Yamanoi, A. Watanabe, and K. Higashi: Scripta Mater., 2001, vol. 45, pp. 89–94.10.1016/S1359-6462(01)00996-4 ↗
11. T. Mukai, M. Yamanoi, and K. Higashi: Mater. Trans. JIM., 2001, vol. 42, pp. 2652–54.10.2320/matertrans.42.2652 ↗
12. W.J. Kim, C.W. An, Y.S. Kim, and S.I. Hong: Scripta Mater., 2002, vol. 47, pp. 39–44.10.1016/S1359-6462(02)00094-5 ↗
13. H.-R. Wenk, L. Lutterotti, and S.C. Vogel: Nucl. Instrum. Methods Phys. Res., Sect. A, 2003, vol. 515, pp. 575–88.10.1016/j.nima.2003.05.001 ↗
14. R.B. Von Dreele, J. Appl. Crystallogr., 1997, vol. 30, pp. 517–25.10.1107/S0021889897005918 ↗
15. J.S. Kallend, U.F. Kocks, A.D. Rollett and H.-R. Wenk: Mater. Sci. Eng., A, 1991, vol. 132 pp. 1–11.10.1016/0921-5093(91)90355-Q ↗
16. H.-R. Wenk and P. Van Houtte: Rep. Prog. Phys., 2004, vol. 67, pp. 1367–428.10.1088/0034-4885/67/8/R02 ↗