journal article·2002-07

Reactive infiltration of 25 vol pct TiO2/Al composites

I. Gheorghe, H. J. Rack

Publisher page

Abstract

The purpose of this investigation was to establish the reaction path during processing of a 25 vol pct TiO2 preform and molten Al composite by pressure infiltration. Initial preform temperatures between 550° and 850 °C, melt temperatures from 715° to 850 °C, and two postinfiltration cooling rates were considered. The reaction path between molten Al and TiO2 under the conditions examined involved three steps: $$\begin{gathered} Al + TiO_2 \to M_2 O_3 + [Ti] \hfill \\ Al + M_2 O_3 \xrightarrow{{Diffusional process}}Al_2 O_3 + [Ti] \hfill \\ 3 \cdot Al + [Ti] \to Al_3 Ti \hfill \\ \end{gathered} $$ the final products being α-Al2O3, Al3Ti, and excess Al. It was further observed that the morphology of the reactant TiO2 whisker was maintained throughout the reaction sequence, the M2O3 to Al2O3 transformation involving diffusion-controlled replacement of Ti atoms by Al. Finally, reaction completion involved heterogeneous nucleation of Al3Ti from the Ti-saturated melt at the Al2O3 interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. J.H. Norman, G.H. Reynolds, and L. Brewer: Mater. Res. Symp. Proc., 1994, vol. 194, p. 369.10.1557/PROC-194-369 ↗
2. P.K. Rohatgi, S. Ray, R. Asthana, and C.S. Narendranath: Mater. Sci. Eng. A, 1993, vol. 162, p. 163.10.1016/0921-5093(90)90041-Z ↗
3. I. Tsuchitori and H. Fukunaga: J. Jpn. Inst. Met., 1992, vol. 56 (3), p. 333.10.2320/jinstmet1952.56.3_333 ↗
4. I. Tsuchitori and H. Fukunaga: J. Jpn. Inst. Met., 1996, vol. 46 (6), p. 292.10.2464/jilm.46.292 ↗
5. I. Tsuchitori, T. Fujii, N. Fuyama, and H. Fukunaga: Proc. ICCM-11, 1997, p. III-63.
6. I. Tsuchitori and H. Fukunaga: J. Jpn. Inst. Met., 1994, vol. 58 (9), p. 1029.10.2320/jinstmet1952.58.9_1029 ↗
7. I. Tsuchitori and H. Fukunaga: J. Jpn. Inst. Met., 1995, vol. 59 (12), p. 1306.10.2320/jinstmet1952.59.12_1306 ↗
8. I. Tsuchitori and H. Fukunaga: J. Jpn. Inst. Met., 1997, vol. 61 (6), p. 544.10.2320/jinstmet1952.61.6_544 ↗
9. I. Tsuchitori and H. Fukunaga: J. Jpn. Inst. Met., 1995, vol. 59 (3), p. 331.10.2320/jinstmet1952.59.3_331 ↗
10. K. Subhash and K. Michael: Mater. Sci. Eng. A, 1993, vol. A162, p. 153.
11. R.W. Rice: J. Mater. Sci., 1991, vol. 26, p. 6533.10.1007/BF02402643 ↗
12. A. Stanislav and A.S. Nahelberg: J. Am. Ceram. Soc., 1992, vol. 75, p. 447.10.1111/j.1151-2916.1992.tb08200.x ↗
13. A.K. Kuruvilla, K.S. Prasad, and Y.R. Mahajan: Scripta Metall., 1990, vol. 24, p. 837.
14. I. Gheorghe and H.J. Rack: J. Mater. Sci., in press.
15. K.M. Lee and I.H. Moon: Mater. Sci. Eng. A, 1991, vol. A185, p. 165.
16. I. Gotman and M.J. Koczak: Mater. Sci. Eng. A, 1994, vol. A187, p. 189.10.1016/0921-5093(94)90347-6 ↗
17. “Least Squares Unit Cell Refinement with Indexing on the Personal Computer,” Preliminary Documentation, June 11, 1984, North Dakota State University, Fargo, ND.