Study of Damage and Fracture Toughness Due to Influence of Creep and Fatigue of Commercially Pure Copper by Monotonic and Cyclic Indentation
Source abstract
Abstract
Fracture toughness is the ability of a component containing a flow to resist fracture. In the current study, the Ball indentation (BI) test technique, which is well acknowledged as an alternative approach to evaluate mechanical properties of materials due to its semi-nondestructive, fast, and high accurate qualities is used to estimate damage and the fracture toughness for copper samples subjected to varying levels of creep and fatigue. The indentation fracture toughness shows the degradation of Cu samples when they are subjected to different creep conditions. Axial fatigue cycling increases the strength at the mid-gauge section compared to other regions of the samples due to initial strain hardening. The advancement of indentation depth with indentation fatigue cycles experiences transient stage, i.e., jump in indentation depth has been observed, which may be an indication of failure and followed by a steady state with almost constant depth propagation with indentation cycles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. F.M. Haggag, T.S. Byun, J.H. Hong, P.Q. Miraglia, and K.L. Murty: Scripta Mater., 1998, vol. 38, no. 4, p. 645.10.1016/S1359-6462(98)00519-3 ↗
2. J.S. Lee, J.I. Jang, B.W. Lee, Y. Choi, S.G. Lee, and D. Kwon: Acta Metall., 2006, vol. 54, pp. 1101-9.
3. S. Ghosh and G. Das: Eng. Fract. Mech., 2012, vol. 79, pp. 126-37.10.1016/j.engfracmech.2011.10.008 ↗
4. S. Ghosh, S. Yadav, and G. Das: Mater. Lett., 2008, vol. 62, pp. 2619-22.10.1016/j.matlet.2008.01.001 ↗
5. K.L. Murty, M.D. Mathew, Y. Wang, V.N. Shah, and F.M. Haggag: Int. J. Press. Vess. Pip., 1998, vol. 75, pp. 831-40.10.1016/S0308-0161(98)00093-3 ↗
6. H. Pelletier, J. Krier, and P. Mille: Mech. Mater., 2006, vol. 38, pp. 1182-98.10.1016/j.mechmat.2006.02.011 ↗
7. H. Lee, J.H. Lee, and G.M. Pharr: J. Mech. Phys. Solids, 2005, vol. 53, pp. 2037-69.10.1016/j.jmps.2005.04.007 ↗
8. M. Bocciarelli, G. Bolzon, and G. Maier: Mech. Mater., 2005, vol. 37, pp. 855–868.10.1016/j.mechmat.2004.09.001 ↗
9. W.C. Oliver and G.M. Pharr: J. Mater. Res., 2004, vol. 19, pp. 3-20.10.1557/jmr.2004.19.1.3 ↗
10. D. Dorothee, R. Klaus, S. Bridit, S. Bernhard, and E. Gunther: Mater. Sci. Eng. A, 2003, vol. 357, pp. 346-54.10.1016/S0921-5093(03)00205-3 ↗
11. Zhao, N. Ogasawara, N. Chiba, and X. Chen: Acta Mater., 2006, vol. 54, pp. 23–32.10.1016/j.actamat.2005.08.020 ↗
12. A. Nayebi, E.R. Abdi, O. Bartier, and G. Mauvoisin: Mech. Mater., 2002, vol. 34, pp. 243-54.10.1016/S0167-6636(02)00113-8 ↗
13. N. Dao, N. Chollacoop, K.J. Vliet, T.A. Venkatesh, and S. Suresh: Acta Mater., 2001, vol. 49, pp. 3899-918.10.1016/S1359-6454(01)00295-6 ↗
14. J.G. Swadener and G.M. Pharr: Philos. Mag. A, 2001, vol. 81, pp. 447-66.10.1080/01418610108214314 ↗
15. A.E. Giannakopoulos and S. Suresh: Scripta Mater., 1999, vol. 40, pp. 1191-8.10.1016/S1359-6462(99)00011-1 ↗
16. S. Suresh and A.E. Giannakopoulos: Acta Mater., 1998, vol. 46, pp. 5755-67.10.1016/S1359-6454(98)00226-2 ↗
17. Y.T. Cheng and C.M. Cheng: Appl. Phys. Lett., 1998, vol. 73, pp. 614-16.10.1063/1.121873 ↗
18. S. Jayaraman, G.T. Hahn, W.C. Oliver, C.A. Rubin, and P.C. Bastias: Int. J. Solids Struct. 1998, vol. 35, pp. 365-81.10.1016/S0020-7683(97)89371-7 ↗
19. K. Zeng, E. Soderlund, A.E. Giannakopoulos, and D.J. Rowcliffe: Acta Mater., 1996, vol. 44, pp. 1127-41.10.1016/1359-6454(95)00196-4 ↗
20. B. Lawn and R. Wilshaw: J. Mater. Sci., 1975, vol. 10, pp. 1049-81.10.1007/BF00823224 ↗
21. I. Pane and E. Blank: Int. J. Solids Struct., 2006, vol. 43, pp. 2014-36.10.1016/j.ijsolstr.2005.08.010 ↗
22. J. Jang, M.J. Lance, S.Q. Wen, T.Y. Tsui, and G.M. Pharr: Acta Mater., 2005, vol. 53, pp. 1759-70.10.1016/j.actamat.2004.12.025 ↗
23. Y.G. Gogotsi, V. Domnich, S.N. Dub, A. Kailera, and K.G Nickel: J. Mater. Res., 2000, vol. 15, pp. 871-9.10.1557/JMR.2000.0124 ↗
24. N.J.M. Carvalho and J.T.M. De Hosson: Acta Mater., 2006, vol. 54, pp. 1857–62.10.1016/j.actamat.2005.12.010 ↗
25. J.M. Cairney, R. Tsukano, M.J. Hoffman, and M. Yang: Acta Mater., 2004, vol. 52, pp. 3229-37.10.1016/j.actamat.2004.03.022 ↗
26. T. Saraswati, T. Sritharan, S. Mhaisalkar, C.D. Breach, and F. Wulff: Mater. Sci. Eng. A, 2006, vol. 423, pp. 14-8.10.1016/j.msea.2005.10.080 ↗
27. E.A. Ossa, V.S. Deshpande, and D. Cebon: Acta Mater., 2005, vol. 53, pp. 3103-13.10.1016/j.actamat.2005.01.040 ↗
28. J.C.M. Li: Mater. Sci. Eng. A, 2002, vol. 322, pp. 23-42.10.1016/S0921-5093(01)01116-9 ↗
29. P. Kaszynski, E. Ghorbel, and D. Marquis: J. Eng. Mater. Technol., 1998, vol. 120, pp. 218-23.10.1115/1.2812346 ↗
30. S.N.G. Chu and J.C.M. Li: J. Eng. Mater. Technol., 1980, vol. 10, pp. 2337-40.
31. J.C.M. Li and S.N.G. Chu: Scripta Mater., 1979, vol. 13, pp. 1021–6.10.1016/0036-9748(79)90196-0 ↗
32. B. Xu, A. Yonezu, and X. Chen: Philos. Mag. Lett., 2010, vol. 90 (5), pp. 313–22.10.1080/09500831003662495 ↗
33. P.J. Weil, W.L. Liang, C.F. Ai, and J.F. Lin: Nanotechnology, 2009, vol. 20 (7), pp. 025701.10.1088/0957-4484/20/2/025701 ↗
34. F. Yang, L. Peng, and K. Okazaki: J. Mater. Sci., 2007, vol. 42, pp. 4513-20.10.1007/s10853-006-0480-2 ↗
35. B. Xu, Z. Yueb, and X. Chen: Scripta Mater., 2009, vol. 60, pp. 854-7.10.1016/j.scriptamat.2009.01.027 ↗
36. B. Guelorget, M. François, and J. Lu: Mater. Lett., 2007, vol. 61, pp. 34-6.10.1016/j.matlet.2006.03.146 ↗
37. Z.F. Yue and B.X. Xu: Theor. Appl. Fract. Mech., 2006, vol. 46, pp. 70-4.10.1016/j.tafmec.2006.05.003 ↗
38. F. Yang and A. Saran: J. Mater. Sci., 2006, vol. 41, pp. 6077-80.10.1007/s10853-006-0680-9 ↗
39. B.X. Xu, Z.F. Yue, and J. Wang: Mech. Mater., 2007, vol. 39, pp. 1066-80.10.1016/j.mechmat.2007.06.001 ↗
40. R.V. Prakash, P. Bhokardole, and C.S. Shin: J. ASTM Int., 2009, pp. 5–9.10.1520/JAI101042 ↗
41. D. Tabor: The Hardness of Metals, Clarendon Press, Oxford, U.K., 1951, p. 15.
42. F.M. Haggag: Report No. DOE/ER/82115-2, Award No. DE-FG02-96ER82115, 1999.
43. M.A. Meyers and K.K. Chawla: Mechanical Metallurgy-Principle and Applications, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1984, p. 07632.
44. G. Das, S. Ghosh, S.K. Sahay, V.R. Ranganath, and K.K. Vaze: Int. J. Mater. Res. Adv. Tech. Metallkd., 2004, vol. 95, pp. 1120–6.10.3139/146.018066 ↗
45. G. Das, S. Ghosh, S. Ghosh, and R.N. Ghosh: Mater. Sci. Eng. A, 2005, vol. 408, pp. 158-64.10.1016/j.msea.2005.07.026 ↗
46. S.S. Manson and G.R. Halford: Fatigue and Durability of Structural Materials, ASM International, Materials Park, OH, 44073-0002, p. 14.