Effect of texture and microstructure on resistance to cracking of high-strength hot-rolled Nb-Ti microalloyed steels
Source abstract
Abstract
Significant texture gradient in the through-thickness direction was observed in high-strength hot-rolled 560 and 770 MPa Nb-Ti microalloyed steels, characterized by polygonal ferrite and ferrite bainite microstructures, respectively. {113}〈110〉 was the most intense deformation texture in the two high-strength grades of Nb-Ti steels and was dominant in the midthickness region compared to 10 and 25 pct depth below the surface. The recrystallization texture of austenite, {100}〈001〉, transformed into {100}〈011〉 component in the ferrite and indicated an increase in the intensity with increase in depth for the Nb-Ti microalloyed steels. The {100}〈011〉 texture has a detrimental effect on the edge formabiity of steels. However, the midthickness plane contained considerable intensity of desired texture, {332}〈113〉, which is expected to offset the undesirable {100}〈011〉 texture resulting in superior edge formability and impact toughness of Nb-Ti steels, consistent with experimental observations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. K.K. Tenneti, A. Dasari, L.J. Ruiz-Aparicio, G. Tither, G.C. Weatherly, and R.D.K. Misra: Proc. 43rd ISS Mechanical Working and Steel Processing, Pittsburgh, PA, 2002, vol. 39, pp. 925–38, Warrendale, PA.
2. R.D.K. Misra, S.W. Thompson, T.A. Hylton, and A.J. Boucek: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 745–60.10.1007/s11661-001-0090-1 ↗
3. R.D.K. Misra, G.C. Weatherly, J.E. Hartmann, and A.J. Boucek: Mater. Sci. Technol., 2001, vol. 17, pp. 1119–29.10.1179/026708301101511040 ↗
4. R.D.K. Misra, K.K. Tenneti, G.C. Weatherly, and G. Tither: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2341–51.10.1007/s11661-003-0297-4 ↗
5. R.K. Ray and J.J. Jonas: Int. Met. Rev., 1990, vol. 35, pp. 1–36.10.1179/095066090790324046 ↗
6. Ph. Lequeu and J.J. Jonas: Metall. Trans. A, 1988, vol. 19A, pp. 105–08.10.1007/BF02669819 ↗
7. H. Inagaki, K. Kurihara, and I. Kozasu: Trans. Iron. Steel Inst. Jpn., 1977, vol. 17, pp. 75–83.10.2355/isijinternational1966.17.75 ↗
8. R. Shoefield, G. Rowntree, N.V. Sarma, and R.T. Weiner: Met. Technol., 1974, vol. 1, p. 325.10.1179/030716974803288112 ↗
9. B.L. Bramfit and A.R. Marder: Metall. Trans. A, 1977, vol. 8A, pp. 1263–73.10.1007/BF02643841 ↗
10. G. Baldi and G. Buzzichelli: Met. Sci., 1978, vol. 9A, p. 509.
11. D.I. Bourelli: Metall. Trans. A, 1983, vol. 14A, pp. 2487–96.10.1007/BF02668890 ↗
12. D.L. Bourelli and O.D. Sherby: Metall. Trans. A, 1983, vol. 14A, pp. 2563–66.10.1007/BF02668900 ↗
13. H. Inagaki and M. Kodama: J. Iron Steel Inst. Jpn., 1981, vol. 67, p. 640.
14. J.P. Anderson: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1535–42.10.1007/BF02647604 ↗
15. J.F. Held: Trans. TMS-AIME, 1967, vol. 239, p. 573.
16. 1989 Annual Book of ASTM Standards, ASTM Designation E 8, ASTM, Philadelphia, PA, 1989, vol. 03.01, p. 131.
17. J.S. Kallend, U.F. Kocks, A.D. Rollet, and H.-R. Wend: Mater. Sci. Eng., 1991, vol. A132, p. 1.10.1016/0921-5093(91)90355-Q ↗
18. R.-J. Roe: J. Appl. Phys., 1965, vol. 36, p. 2024.10.1063/1.1714396 ↗
19. R.-J. Roe: J. Appl. Phys., 1966, vol. 37, p. 2069.10.1063/1.1708672 ↗
20. H.J. Bunge: Z. Metallkd., 1965, vol. 56, p. 872.
21. R.E. Hook: Metall. Trans. A, 1993, vol. 24A, pp. 2009–19.10.1007/BF02666336 ↗
22. ASTM Annual Book of Standards, ASTM Designation E 290, ASTM, Philadelphia, PA, 1993, pp. 335–38.
23. S. Hashimoto, T. Yakushiji, T. Kashima, and K. Hosami: Proc. Int. Conf. on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals, Iron Steel Institute of Japan, Tokyo, Japan, 1988, vol. 2, p. 652.
24. M. Matsuo, T. Sakai, and Y. Suga: Metall. Trans. A, 1986, vol. 17A, pp. 1313–20.10.1007/BF02650112 ↗
25. I. Tamura, H. Sekine, T. Tanaka, and C. Ouchi: Thermomechanical Processing of High-Strength Low-Alloy Steels, Butterworth and Co., London, 1923, p. 107.